New SSD SCX10 axle housings
 

coming soon...
thicker than axial housings
prototype shown

Super scale design
Small OD tubes
One piece housing
Removable diff cover
4 link mount included
Panhard mount included
Stronger with more material at the bottom to wear away over the rocks.
A skid has been incorporated into the design.

Advantages over VP, RC4WD:
A LOT cheaper
Plastic slide over rocks easier
100% compatible with stock parts (RC4WD D44s need all new D44 shafts/parts)
Smaller than VP Curries



https://scontent-dfw1-1.xx.fbcdn.net...66&oe=565384E2

https://scontent-dfw1-1.xx.fbcdn.net...b4&oe=5620C5CE

https://scontent-dfw1-1.xx.fbcdn.net...d3&oe=5616949E

edit: here are some more pics. also a sneak peak of the proto optional alumimum diff cover"thumbsup"

http://i28.photobucket.com/albums/c2...psqmkrvr0u.jpg

http://i28.photobucket.com/albums/c2...psjyofg5k8.jpg

http://i28.photobucket.com/albums/c2...psziodtz2e.jpg

Re: New SSD SCX10 axle housings
 

Yeah, I think I'll be getting a set of them!!"thumbsup"

Re: New SSD SCX10 axle housings
 

See Axial, that's what the SCX10 axles should have looked like since the AR60s came out. Looking good SSD. "thumbsup"

Re: New SSD SCX10 axle housings
 

Material?

Re: New SSD SCX10 axle housings
 

THATS SICK!!!! Will definitely be getting a set for my rig!!

Re: New SSD SCX10 axle housings
 

I will take a set!!! Any idea on when available?

Re: New SSD SCX10 axle housings
 

Is there a possibility of seeing a version with an offset front diff? I wouldn't mind cutting down shafts to do it.

Re: New SSD SCX10 axle housings
 

Neato!

Re: New SSD SCX10 axle housings
 

offset front diff would be the tits... also, any chance for AR60-style axle tube ends?

SSD is killing it right now 8)

Re: New SSD SCX10 axle housings
 

I'm sure has to do manufacturing and/or cost. But a diff with changeable tubes would be cool.

Re: New SSD SCX10 axle housings
 

I would happily pay a little more for an offset version [emoji106]

Re: New SSD SCX10 axle housings
 

Will they be getting the "bigger pinion bearing" treatment?

Re: New SSD SCX10 axle housings
 

I don't even need those but really want those.

Re: New SSD SCX10 axle housings
 

I'll get a set in black please!

From the picture it looks like the pumpkin part where the tube is attached is not thick enough but I might be wrong.
Hope they will make a straight rear axle too and yes, a bigger bearing for the pinion shaft please. :)

Re: New SSD SCX10 axle housings
 

Those look great!

Any hopes of some in steel?

Re: New SSD SCX10 axle housings
 

Some info...

Injection molded nylon
One piece housing (like Axial ar60)
Removable diff cover - aluminum diff cover will be available at release
4 link mount included
Panhard mount included
Servo on axle is possible - with optional mounting plate
100% compatible with stock SCX10 axle gears, shafts, bearings, C hubs and knuckles - so it's a straight swap, no new parts needed.

Re: New SSD SCX10 axle housings
 

That's the same axle that was on the rig that they were promoting their rear bumper on, I think. Someone in that thread posted that it was an RC4WD D44 rear. Kind of amusing that no one noticed it.:ror:

Very nice SSD!!!

Re: New SSD SCX10 axle housings
 

Re: New SSD SCX10 axle housings
 

Nice looking axles might pick up a set as well

Sent from my Nexus 6 using Tapatalk

Re: New SSD SCX10 axle housings
 

i will definetly be in for a set, and an offset front diff would be cool