| |
10-10-2015, 01:45 PM
| #1 |
| Newbie  Join Date: Apr 2012 Location: Norway
Posts: 16
|  Wraith axels on Scx10
Hi guys.. I need some help  I have run my Scx10 with the Vanquish Curry axels.. and I’m pretty pleased with this setup.. But i like the width of the Wraith axels, so i bought the new hardware to rebuild the axels to Wraith. I knew the links was going to be a problem, so I wonder if there are any link kit`s available for purchase. Preferably TI links.. I would really appreciate your help Tom |
|  |
| Sponsored Links | |
| | |
|
10-10-2015, 02:47 PM
| #2 |
| Pebble Pounder Join Date: Oct 2009 Location: Tacoma
Posts: 199
| Re: Wraith axels on Scx10
I wish there was seeing that not everybody has the capability to make their own links. But you're going to have to make your own or figure out what length pre-made links you'll need. Search "wroncho" for info on this set up.
|
|
| |
|
10-10-2015, 02:51 PM
| #3 |
| Pebble Pounder Join Date: Aug 2011 Location: gaylord
Posts: 141
| Re: Wraith axels on Scx10
Get a set of the wroncho plates well worth the 30.00 they cost from a vendor from here.
|
|
| |
|
10-10-2015, 03:28 PM
| #4 |
| Newbie Join Date: Apr 2012 Location: Norway
Posts: 16
| Re: Wraith axels on Scx10
Thanks guys.. I will look into the wroncho plates. I will try to figure out the lengths for the links also.. Is there a good place to buy the TI rods ?? Sent from my iPad using Tapatalk HD |
|
| |
|
10-10-2015, 06:08 PM
| #5 |
| Rock Crawler Join Date: Apr 2009 Location: bend
Posts: 897
| Re: Wraith axels on Scx10
I searched wroncho's looked at what everyone was doing and built one. I really like how it turned out it's one of my favorite rigs to drive.
|
|
| |
|
10-13-2015, 01:08 PM
| #6 |
| I wanna be Dave  Join Date: May 2015 Location: Moving
Posts: 2,580
| Re: Wraith axels on Scx10
+1 on todbldz's Wroncho plates. They are great even if you don't put them on a Wroncho build. I have 2 sets and they are versatile, well made, and cheap. On SCX10 style axles they give you good anti squat and enable you to dial in the pinion angle quickly and easily. On a Wroncho build they also let you clear the driveshafts and because of the abundant choice of upper link mounting options you can easily reuse the links you already have and still have the correct wheelbase and ideal pinion angle. I've noticed how many of the new aftermarket chassis rails are incorporating more upper link mounting options. It's just a good design and really increases suspension tuning options.
|
|
| |
|
10-13-2015, 05:05 PM
| #7 |
| Pebble Pounder Join Date: Nov 2012 Location: Louisville
Posts: 105
| Re: Wraith axels on Scx10
Here is a link to my Wroncho build on SBG, hope it helps you out. I used a GCM racing SCX10 front mount conversion to eliminate all of the binding issues. Wroncho Punisher.. |
|
| |
|
10-13-2015, 05:15 PM
| #8 |
| I wanna be Dave Join Date: Dec 2006 Location: Where the sheep run scared.
Posts: 3,008
| Re: Wraith axels on Scx10
Jmo but wraith axles are to wide for a proper scale rig.
|
|
| |
|
10-13-2015, 05:30 PM
| #9 |
| Rock Crawler Join Date: Jan 2008 Location: P-TOWN
Posts: 748
| Re: Wraith axels on Scx10
The only issue is the bottom links hitting the drive shafts. I used a high clearance link and a couple angled rod ends to clear mine. If you keep your axle outputs in line with the output of the trans and clock them up you will be better off and you won't have those crazy drive line angles to deal with.
|
|
| |
|
10-13-2015, 08:20 PM
| #10 |
| I wanna be Dave Join Date: Apr 2013 Location: Streamwood, IL
Posts: 2,442
| Re: Wraith axels on Scx10
or you could do this:
|
|
| |
|
10-14-2015, 04:12 PM
| #11 | |
| I wanna be Dave Join Date: May 2015 Location: Moving
Posts: 2,580
| Re: Wraith axels on Scx10 Quote:
 | |
|
| |
 |
| |
Linear Mode
