Go Back   RCCrawler Forums > Scale Rigs Brand Specific Tech > Axial Brand Scale Rock Crawlers > Axial SCX-10
Loading

Notices

Thread: Early 50's body for SCX10 Jeep Wrangler Limited Edition

Reply
 
LinkBack Thread Tools Display Modes
Old 02-17-2016, 12:05 PM   #1
Newbie
 
Join Date: Feb 2016
Location: USA
Posts: 32
Default Early 50's body for SCX10 Jeep Wrangler Limited Edition

Hello all!
New to the forum, just completed a Yeti build and purchased the AX90035
SCX10™ 2012 Jeep® Wrangler Unlimited C/R Edition 1/10th Scale Electric 4WD – RTR for crawling / pulling a boat trailer that I'm going to build.

Question: Will the proline early 50's body fit the SCX10 RTR?
The description indicates it will, but I've heard otherwise.

Pro-Line Early 50's Chevy Body 3255 for 1:10 Truck


"This is the Early 50's Chevy® Clear Body for the Traxxas® Stampede® and Stampede® 4X4. There's nothing like a classic automobile. It's rugged design, non-plastic interior screams ingenuity and provides a unique character. Maybe that's why most American's have such awe for classics; or, maybe it's because of their simplicity. Whatever that case may be, you love them and are reminded of a different time. Pro-Line welcomes you back to the future of automobiles with the release of the Early 50's Chevy® for the Electric or Nitro Stampede as well as the Axial AX10, Axial SCX10, Tamiya CR-01."

Looks like Axials 54 chev body isn't available anymore.
Darthintel is offline   Reply With Quote
Sponsored Links
Old 02-17-2016, 12:34 PM   #2
Quarry Creeper
 
Join Date: Dec 2015
Location: ossipee
Posts: 200
Default Re: Early 50's body for SCX10 Jeep Wrangler Limited Edition

Looks like it should fit fine might have to trim around the wheel wells to get
full articulation.
ossipeecrawler is offline   Reply With Quote
Old 02-17-2016, 12:44 PM   #3
Newbie
 
Join Date: Nov 2010
Location: Alliance
Posts: 19
Default Re: Early 50's body for SCX10 Jeep Wrangler Limited Edition

The AX90035 has the longer 12.3" wheelbase. My understanding is that the longer wheel base fits Proline's E-Maxx bodies (@ 12.6"), and the shorter wheelbase fits their Stampede bodies. Since that 50's Chevy body is for the Stampede, you will probably have to shorten your links to line up the wheel wells. I'm using an E-Maxx body on my Honcho, and compensate for the extra .3" wheelbase by using slightly longer rod ends.
cjmor1804 is offline   Reply With Quote
Old 02-18-2016, 08:52 AM   #4
RCC Addict
 
Join Date: May 2013
Location: Forrestfield, Western Australia
Posts: 1,082
Default Re: Early 50's body for SCX10 Jeep Wrangler Limited Edition

Short of being able to walk into a hobby shop & measure it I wouldn't be buying a Stampede body for my scx10.
If you look at others in ProLines 1:10 MT range they're only 6" wide & around 10.5" wheel base.
altd896 is offline   Reply With Quote
Old 02-18-2016, 12:05 PM   #5
Newbie
 
Join Date: Nov 2010
Location: Alliance
Posts: 19
Default Re: Early 50's body for SCX10 Jeep Wrangler Limited Edition

Axial has another variant you might like. The Axial B-17 Betty for the AX10 Scorpion with a 12-12.6" wheelbase (PN: AX4004). It looks somewhat similar to the Axial CF-100 for the SCX10 Kustom Retro with a 11.4" wheelbase, as shown in the picture (PN: AX4013). The most noticeable difference is the B-17 has a winch and gas canisters molded in. You can occasionally find it on rc recycler or ebay, but they're usually already painted. Another discontinued body you might be able to find is Proline's 50s Chevy for the E/T-Maxx (PN: PRO310601), but it doesn't look as good in my opinion.

Also, If you are good at crafting, you could always chop the bed off the Proline body and make a tubed rear. Here's a link to a build using Parma's 57 Chevy for an example: 57 chevy beater truggy. And to take it a step further, I found a damn good scratch build of a later model you could reference: 59' Chevy Apache

Last edited by cjmor1804; 02-18-2016 at 02:23 PM.
cjmor1804 is offline   Reply With Quote
Old 02-19-2016, 03:54 PM   #6
Newbie
 
Join Date: Feb 2016
Location: USA
Posts: 32
Default

I was lucky and found an unpainted CF-100 body still in the box including the decal sheet yesterday - so I bought it today!
I can't wait to receive it and paint it up!

This forum is great!

I finally painted the early 50's body - I love it !


Last edited by THX_138; 12-15-2016 at 09:42 PM.
Darthintel is offline   Reply With Quote
Old 04-08-2016, 03:16 PM   #7
I wanna be Dave
 
Natedog's Avatar
 
Join Date: Jan 2006
Location: Corruptifornia
Posts: 12,107
Default Re: Early 50's body for SCX10 Jeep Wrangler Limited Edition

Quote:
Originally Posted by sf2000xj View Post
This was the body from the original scx10,axial made this not proline. It's been discontinued for a while. Occasionally they will pop up on ebay and on here in the classified section.
No, the Axial B-17 Betty body was the original AX-10 body, still have mine all painted and cut too much. Good looking bodies.

Quote:
Originally Posted by altd896 View Post
Short of being able to walk into a hobby shop & measure it I wouldn't be buying a Stampede body for my scx10.
If you look at others in ProLines 1:10 MT range they're only 6" wide & around 10.5" wheel base.
X2

Quote:
Originally Posted by Darthintel View Post
I finally painted the early 50's body - I love it !
Congratulatioins and looks good!
Natedog is offline   Reply With Quote
Old 04-08-2016, 04:03 PM   #8
Quarry Creeper
 
Join Date: Mar 2009
Location: martins ferry
Posts: 241
Default Re: Early 50's body for SCX10 Jeep Wrangler Limited Edition

Quote:
Originally Posted by Natedog View Post
No, the Axial B-17 Betty body was the original AX-10 body, still have mine all painted and cut too much. Good looking bodies.



X2



Congratulatioins and looks good!
I said original scx10 not ax10, scx10 was originally only in kit form and the 1st one was that body not the Betty she was never offered on the scx10

Sent from my SM-G920V using Tapatalk
sf2000xj is offline   Reply With Quote
Old 04-08-2016, 04:10 PM   #9
Pebble Pounder
 
Join Date: May 2014
Location: fernandina beach
Posts: 111
Default Re: Early 50's body for SCX10 Jeep Wrangler Limited Edition

Darth, the flames look great on the classic body! I saw a guy that sells red lcg chassis on ebay, now that would look hot! and btw, you have to pay $20 for a green star to get on the classifieds, in case your wonderin'...
mr dave is offline   Reply With Quote
Old 04-08-2016, 04:54 PM   #10
Newbie
 
Join Date: Feb 2016
Location: USA
Posts: 32
Default Re: Early 50's body for SCX10 Jeep Wrangler Limited Edition

Quote:
Originally Posted by mr dave View Post
Darth, the flames look great on the classic body! I saw a guy that sells red lcg chassis on ebay, now that would look hot! and btw, you have to pay $20 for a green star to get on the classifieds, in case your wonderin'...
A red chassis would be awesome! Most of the driving though will be with the Jeep body on it. A front bumper winch is next. Then a boat, and a home made boat trailer .

Sent from my SM-N910V using Tapatalk
Darthintel is offline   Reply With Quote
Old 01-16-2019, 11:15 AM   #11
I wanna be Dave
 
Join Date: Mar 2013
Location: Minden
Posts: 2,198
Default Re: Early 50's body for SCX10 Jeep Wrangler Limited Edition

Hey you sent me a pm, you are talking about the original SCX10 short wheel base 50's body that came with the Legacy Kustom Retro kit, it's one the Axial website in the discontinued section, the black is used and some one cut the body, the clear one is untrimmed and have the sticker sheet and sticker placement sheet, I looked and found a bunch of completed sales for already painted ones which now are unavailable, but no untrimmed ones or unpainted ones that are also unavailable and no sticker sheets either, I still have the original rims and green bead locks rings and the 1.9'' Flat Iron tires from the original kit, not sure I want to part with it, it worth more than what your offering since there not available







'
Attached Images
    

Last edited by kgb424; 01-16-2019 at 07:10 PM.
kgb424 is offline   Reply With Quote
Old 01-17-2019, 10:05 AM   #12
Newbie
 
Join Date: Feb 2016
Location: USA
Posts: 32
Default Re: Early 50's body for SCX10 Jeep Wrangler Limited Edition

Ok thanks for the reply.
Darthintel is offline   Reply With Quote
Reply



Early 50's body for SCX10 Jeep Wrangler Limited Edition - Similar Threads
Thread Thread Starter Forum Replies Last Post
4by4's Axial SCX10 Jeep Wrangler G6 Edition Build 4by4 Axial SCX-10 26 05-26-2015 03:22 AM
SCX10 - Jeep Wrangler C/R Edition - Weekend Run nmspt Scale Videos! 0 05-11-2015 03:13 PM
SCX10 Jeep Wrangler Unlimited C/R Edition WINNER!!! jason General Crawlers 25 07-18-2014 09:45 AM
Early '90's Jeep wrangler body? dirtman Paint and Body 5 02-28-2009 09:30 PM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 12:46 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com