Mounting the Mighty FC Body
 

For those of you using body posts, what are you going with? Looks like the new SCX10 II body posts might work, but thought I would check to see if anyone has already done it.

Thanks in advance

I don't have the fc body but I have mounted bodies with high tops before

You are going to need to use the single piece dual body mount, the one in the shape of an "x". This should have enough height to work for your body. I don't know the part number but I know it is included in the kits and rtrs. Good luck!

Re: Mounting the Mighty FC Body
 

Thanks. Repurposing my Honcho for this. If my Honcho came w/ body mount, I don't know where it is now (or perhaps I tossed it). Imagine it's the same as the one they're selling for the SCX10 II.

Re: Mounting the Mighty FC Body
 

FC body?

Re: Mounting the Mighty FC Body
 

Yes. I got the link set to shorten the wheelbase appropriately, and just replaced the links today. While waiting for the paint and body posts to come in for the FC, I'm running the honcho on the shortened wheel base (had to put a couple more holes in the body) and I'm really digging the look!

Re: Mounting the Mighty FC Body
 

I just mounted an FC body using the Axial high posts and these extensions
http://www.rccrawler.com/forum/membe...4324-62406.jpg

Here's how it looks.
http://www.rccrawler.com/forum/membe...4324-62405.jpg

Re: Mounting the Mighty FC Body
 

Thanks for linking to the extensions; I just ordered them!

Re: Mounting the Mighty FC Body
 

You're welcome.

Re: Mounting the Mighty FC Body
 

But how did Axial mount the body in their promo pictures? The included posts arent tall enough, it seems.https://uploads.tapatalk-cdn.com/201...4e19d15453.jpg

Sent from my SM-G930F using Tapatalk

Re: Mounting the Mighty FC Body
 

I had no issues using the Axial tall "X" looking body post when I mounted my FC body
https://uploads.tapatalk-cdn.com/201...94ebce09cd.jpg
https://uploads.tapatalk-cdn.com/201...e2952588b9.jpg

Since this picture the body was removed from the chassis and moved to the SCX10.2 https://uploads.tapatalk-cdn.com/201...5f2f7fb1f5.jpg

Again no issues when using the tall body "X" posts. The lower part add on lexan part will sit on the the chassis rails but it is no big deal. Going on 3yrs now and still no paint on the body maybe some day


Sent from my iPhone using Tapatalk

Re: Mounting the Mighty FC Body
 

thanks for the pictures! I must check to see if my stock tall posts have different lengths (I have several). Otherwise this is very strange:)

Sent from my SM-G930F using Tapatalk

Re: Mounting the Mighty FC Body
 

Where did you get the cage roll bar setup you have on there?

Re: Mounting the Mighty FC Body
 

Are these bodies top heavy because of the cab?

Re: Mounting the Mighty FC Body
 

It is the Knight Customs front cage for the FC. I picked it up from RPP Hobby. Not sure if they still have them but you should be able to get it from us Shapeways store also.
The light bar is 6 inch and fits almost perfectly. Just needs a little spacer on each side.

Re: Mounting the Mighty FC Body
 

They tend to be but with the light bar I am not helping myself out. If left stock it’s probably no worse than the Axial MOG. I just added some rear axle weight to help out.