Alex's Rubicon Racer Project

[NightJeep]

Hey All,

I'm starting a thread to help log my Axial SCX10 Jeep Racer project. After I picked up a SCXII, I decided to make this one my dedicated racer for the WARCRC U4RC series. So far it's doing pretty well. Here's the specs

Axial SCX10 Rubicon
ESC: Castle Mamba X
Motor: Castle 4600KV Sensored
Servo: Savox SW-1210SG
Axles: SSD D60 (stock internals)
CMS: SSD
Wheels: Axial 8 hole with Gearhead rings
Foams: Stock
Tires: SCXII BFG All Terrains
Front Shocks: 35wt stock springs most aft position longer lower rod ends
Rear Shocks: 30 wt stock springs most fwd position.

Plenty more changes to come, but I'm happy with the way it performs at the moment. Still need to solve the servo arm-steering link clearance issue and the front end bucking off jumps (probably caused by the clearance issue).

Here's the pics I've collected so far.

[ferebeed]

That looks good. Can you take another pic of your steering servo set up. Like to see the other side. I would like to get mine off the axle.


Sent from my iPhone using Tapatalk

[NightJeep]

Originally Posted by ferebeed

That looks good. Can you take another pic of your steering servo set up. Like to see the other side. I would like to get mine off the axle.


Sent from my iPhone using Tapatalk

Here you go!



It's the SSD CMS kit. I ordered it from RPP Hobby. They also have a newer version of the kit if you have their D60 axles.

Standard CMS
SSD RC Chassis Mounted Steering CMS Kit for SCX10

D60 CMS
SSD RC D60 Chassis Mounted Servo kit for SCX10