New SSD V2 Conversion kit Want to convert an old SCX10 to SCX10 II axles? http://www.ssd-rc.com/images/scx10%2...ion%20main.jpg http://www.ssd-rc.com/images/scx10%2...ersion%202.jpg http://www.ssd-rc.com/images/scx10%2...ersion%203.jpg More info here: Pro44 CMS & Titanium Link Set / V2 Conversion for SCX10 |
Re: New SSD V2 Conversion kit How about this "pro 44"? |
Re: New SSD V2 Conversion kit I've been looking into this sort of kit for a while now! What's the difference between SCX10 links and SCX10ii links? I assume the driveshafts/shocks will bolt right on? |
Re: New SSD V2 Conversion kit What wheelbase do these give you? |
Re: New SSD V2 Conversion kit Quote:
from SSD site |
Re: New SSD V2 Conversion kit Quote:
|
Re: New SSD V2 Conversion kit Old thread, necro bump, whatever. Can I use these on my stock SCX10 Deadbolt, without swapping to SCX10 II axles? |
Re: New SSD V2 Conversion kit Quote:
|
Re: New SSD V2 Conversion kit I have this kit, and I'll just say I definitely recommend it. It's completely hassle free and together with the SSD diamond pro axle case the end result is great :) Sent from my SM-G930F using Tapatalk |
Re: New SSD V2 Conversion kit If I wanted to run scx10-2 axles on my Dingo would I have to make my own custom links or is there a kit around for it? I would like to eventually go to CMS and some axles with more ground clearance. |
Re: New SSD V2 Conversion kit Quote:
I think the Dingo wheelbase is 290mm so you would need to change the links. Maybe just shorten the rear links by 15mm. I'm not sure on this as I cant remember if the Dingo and Deadbolt used the same front links. You should be able to check that easily. |
All times are GMT -6. The time now is 12:16 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com