RCCrawler Forums - A Red SCX10 II XJ

RCCrawler Forums (http://www.rccrawler.com/forum/)

- Axial SCX10 II (http://www.rccrawler.com/forum/axial-scx10-ii/)

- - A Red SCX10 II XJ (http://www.rccrawler.com/forum/axial-scx10-ii/573573-red-scx10-ii-xj.html)

A Red SCX10 II XJ

After a several month wait, I finally got my kit. Yea!

Here's the basic layout and electronics. Holmes 550 10t Crawlmaster. Mamba Monster X (soon to be swapped for Holmes BLE Pro). Holmes SHV500 Servo. Heyok winch controller. BEC was installed to knock voltage down to winch.
http://i869.photobucket.com/albums/a...pslts5u2mu.jpg

After looking at some people's failures on the Duece, I decided to put longer screws and nuts on the Chubs.
http://i869.photobucket.com/albums/a...pswwpooail.jpg

LockedUp RC D-rings and Bare-Metal Foil for the headlights.
http://i869.photobucket.com/albums/a...psa2i4abu7.jpg

Dead Sexy Methods from Vanquish and scale hardware from LockedUp. Tires filled with CI Deuces Wild CWR-3001.
http://i869.photobucket.com/albums/a...ps01mh5rbe.jpg

On the trail. Plasti-dip on the fenders and hood. Need some inner fenders. Either DIY or Knight's... not sure what way I am going.
http://i869.photobucket.com/albums/a...pshhbi6a7x.jpg

http://i869.photobucket.com/albums/a...psgqipxjki.jpg

Quick video of my son and I out last weekend.
<iframe width="560" height="315" src="https://www.youtube.com/embed/BLMApaAzmzQ" frameborder="0" allowfullscreen></iframe>

Re: A Red SCX10 II XJ

Nice build chip! I know that run was LONG overdo

Re: A Red SCX10 II XJ

We've got 10.2 specific inner fenders in the making at rcaddict. Love the idea of the foil in the headlights, I was thinking tin foil and Crystal Clear glue may be workable too.

Sent from my XT1585 using Tapatalk

Re: A Red SCX10 II XJ

Pic looks like moonrocks

Re: A Red SCX10 II XJ

Quote:

Originally Posted by trig n tahoe (Post 5582633)

Pic looks like moonrocks

Opposite side of the state, I live in Ely. "thumbsup" The video was taken below Squaw Peak, just a minute or two from town.

I have been to Moonrocks for the G6 Birthday Bash. A lot of fun there. Hoping to go back for this year's Birthday Bash.

I did swap ESC and motor. Last weekend I installed a 2200Kv Puller Pro Stubby and MMP. I geared it with a 14 tooth pinion on 3s. I really, really like the setup. Great low-speed control, yet fast enough to out pace me at a run.