Amoney's SCX10 II Build Thread: Getting back into it Whats up guys! Long time member, new account. I have not had a crawler since 2009. I took about a 5 year hiatus from RC completely and have been getting back into it over the past two years. The rc shop I run at called Super-G, well we all randomly got into getting crawlers again, we all bought the new SCX10 II kits and it all started. Now we try to run a couple times a week. Anyway let me not bore you on with the pics. Here it is right after I finished it, I test ran it outside and then took it to the Rc shop to get some LED's since we were going to Recon G6 in 3 days. Mod List: at this point - Tekin 35T Motor & esc combo - OMG High speed, High torque Servo - Pro-Line Super Swamper XL's and Proline Beadlocks http://i1223.photobucket.com/albums/...psbbe3m8vy.jpg Since we were going to Recon G6 I didn't really know what to expect I've never been to a crawling event, but i wanted a winch. http://i1223.photobucket.com/albums/...ps4jhnzxgo.jpg Got the truck kind of dialed in also got the lights installed, built, driven 20 mins, then took it to Recon G6. What a blast, i didn't get many pictures because i was having too much fun. truck handled like a champ and the winch was put to use for myself and others. http://i1223.photobucket.com/albums/...pso4xvm2nn.jpg http://i1223.photobucket.com/albums/...pswgudo5z6.jpg Added a couple more things too it, - Inner Body (not finished yet) - RC4WD Mickey Thompson's - Xtra Speed Front and Rear Bumpers (garbage don't buy them) - Cut fenders http://i1223.photobucket.com/albums/...pssxpoo6mr.jpg http://i1223.photobucket.com/albums/...psd48vziau.jpg http://i1223.photobucket.com/albums/...ps7d4yafkg.jpg One of my buddies didn't want his body, so i bought it to do a oem style body. I kept the original lexan bumpers but i tore them off the first day lol. Lights were masked to do tailights. Only pictures i have of it with the bumpers http://i1223.photobucket.com/albums/...psy8chaljd.jpg http://i1223.photobucket.com/albums/...psaudtjk71.jpg |
Re: Amoney's SCX10 II Build Thread: Getting back into it And here is how it sits now. Some stuff isn't pictured, but don't worry now that i made a thread i will take more pictures. Current Modlist: Everything listed previously and -SSD Front Bumper (best one I've seen yet) -Vanquish Rockjock Currie Axle Front http://i1223.photobucket.com/albums/...psf1dhc6j0.jpg http://i1223.photobucket.com/albums/...psvtlhylda.jpg http://i1223.photobucket.com/albums/...psfkroik0a.jpg http://i1223.photobucket.com/albums/...ps2n8rfcht.jpg |
Re: Amoney's SCX10 II Build Thread: Getting back into it Nice build.What light bar is that? |
Re: Amoney's SCX10 II Build Thread: Getting back into it Quote:
|
Re: Amoney's SCX10 II Build Thread: Getting back into it Quote:
|
Re: Amoney's SCX10 II Build Thread: Getting back into it Quote:
__________________________ So got some goods in the mail yesterday. Was going to the Rc spot later so i had to get the new parts on to test them out. - Incision Steel link set - SSD Knuckles - SSD Knuckle weights http://i1223.photobucket.com/albums/...psavpzy3jg.jpg http://i1223.photobucket.com/albums/...psih3t8mqf.jpg http://i1223.photobucket.com/albums/...pslr7rbwha.jpg http://i1223.photobucket.com/albums/...pstzzvl2yj.jpg After a quick install, onto Super G. Here i finally got a shot of the light output. Truck did great. I need to upgrade my servo after running, it cant handle the weight of the axle weights. Cant wait for my rear axle to get here, the rear end was a little light not having either a metal axle or weights. My steering increased by so much that my tires hit the lower links, have to fix that next. http://i1223.photobucket.com/albums/...ps4gwnufju.jpg http://i1223.photobucket.com/albums/...psiyolir9j.jpg http://i1223.photobucket.com/albums/...psw0fxagxn.jpg |
Re: Amoney's SCX10 II Build Thread: Getting back into it No shelf queen here. Putting these curries to use. http://i1223.photobucket.com/albums/...ps7wwyvhzr.jpg Anyway, got a delivery from vanquish today. Got my rear axle and rear axle shafts. http://i1223.photobucket.com/albums/...pskuqlunai.jpg http://i1223.photobucket.com/albums/...psjuxckdpf.jpg http://i1223.photobucket.com/albums/...psvpltkurj.jpg http://i1223.photobucket.com/albums/...pskqsycq1w.jpg http://i1223.photobucket.com/albums/...psa1rb25ft.jpg |
Re: Amoney's SCX10 II Build Thread: Getting back into it So been working on the the truck a little bit more. i like how one of my friends scx10.2 was driving with his 100mm shocks so i wanted a set as well. I went with the RC4WD King shocks because honestly i like the licensed products. it adds even more realism which i think is pretty cool. To contradict my statement i swapped the super swampers for the Hyrax tires LOL. http://i1223.photobucket.com/albums/...ps6wy08d98.jpg http://i1223.photobucket.com/albums/...psejmqvp7l.jpg http://i1223.photobucket.com/albums/...psi4aunirk.jpg Awesome Details on these http://i1223.photobucket.com/albums/...psjiotioky.jpg Size Comparison http://i1223.photobucket.com/albums/...psmzle01qn.jpg Just a quick flex test. http://i1223.photobucket.com/albums/...ps9h70baid.jpg Next up was changing up tires to the Hyrax. http://i1223.photobucket.com/albums/...psrz9mcbnb.jpg http://i1223.photobucket.com/albums/...psxguruv7m.jpg Slightly taller then the super swampers http://i1223.photobucket.com/albums/...ps4ud2g5x6.jpg http://i1223.photobucket.com/albums/...psfdredcto.jpg http://i1223.photobucket.com/albums/...psvbkb0rc2.jpg This is where i saw the real difference in heights http://i1223.photobucket.com/albums/...pspv1p6mmt.jpg Took it out to the pathway in front of my house. The clearance was way better than it was and i am able to hit up steeper rocks i wasn't able too before. http://i1223.photobucket.com/albums/...psue8ihdr8.jpg http://i1223.photobucket.com/albums/...pswesilcod.jpg Then i started working on my driver for the interior. A tamiya piece. http://i1223.photobucket.com/albums/...ps3pd2jj57.jpg Getting there, don't mind the tape, was waiting for arms glue to dry. and don't mind him texting and driving on the trail, or is he getting some shots for the instagram. http://i1223.photobucket.com/albums/...psxrcxgigv.jpg Anyway thats all for now, I also installed a New Savox servo, which ill post some pictures later. |
Re: Amoney's SCX10 II Build Thread: Getting back into it Very nice build. What foams are you using in the Hyrax ties? And have you noticed any changes in C/G or top heavy by changing to the taller shocks? Thanks. |
Re: Amoney's SCX10 II Build Thread: Getting back into it I love the look of the Curries and King shocks. Also interested in any CG changes but I think you added enough weight down low to offset it. |
Re: Amoney's SCX10 II Build Thread: Getting back into it Quote:
Quote:
|
Re: Amoney's SCX10 II Build Thread: Getting back into it The default springs for the King shocks are med/med(blue/blue) front and rear. It is sprung a bit harder than the SCX10.2 kit springs so you might not need that much preload as all your weight is unsprung. I run White/blue in the front and yellow/blue in the back so the truck isn't so "jacked" up. but looks nice nonetheless. |
Re: Amoney's SCX10 II Build Thread: Getting back into it Quote:
______________________________________ So i tested the truck out and its a little roll happy with my current spring setup/shock placement. But it started raining when i went to test the truck and i got to test out the hyrax tires on wet rocks. They did great like it was not even raining honestly, they clear water pretty well. here is the only pics i got of the rain run (keeping the phone dry) http://i1223.photobucket.com/albums/...psjurcakxz.jpg http://i1223.photobucket.com/albums/...ps2knymajq.jpg Got a couple more goodies from vanquish. Shaft for the trans (installing later date) and their new servo arm. The servo arm is pretty beefy i included pictures of it next to my old hot racing one. http://i1223.photobucket.com/albums/...psiygkcfka.jpg http://i1223.photobucket.com/albums/...psbwqxrg89.jpg http://i1223.photobucket.com/albums/...psetsnipei.jpg http://i1223.photobucket.com/albums/...pspy0zwoby.jpg |
Re: Amoney's SCX10 II Build Thread: Getting back into it And the piece of resistance, my Cherokee hardbody arrived! Only took two weeks but it has finally showed up. The body is perfect in size IMO fits the stock rear bumper, fits perfect with the ssd bumper, can mount it lower to bring the cog down. i am very happy with it. Here it is at the start of mock up, debating how to mount it. http://i1223.photobucket.com/albums/...ps2wuue35n.jpg Notes for myself on what holes to fill etc. im going to use stock body posts in rear and use allens up front. http://i1223.photobucket.com/albums/...psc5iwsiom.jpg Taking deep breaths i drilled two holes into my fresh body. http://i1223.photobucket.com/albums/...ps396tl2ob.jpg Fits pretty dang nice. http://i1223.photobucket.com/albums/...psialfy8zy.jpg http://i1223.photobucket.com/albums/...psuk4bqmpz.jpg Next was to mount the front, i used some trickery and used my Jack as the front mounting point into a extra set of body post waiting underneath. http://i1223.photobucket.com/albums/...ps3kpkgf5n.jpg http://i1223.photobucket.com/albums/...psrpen56qw.jpg Now to deal with our heavy rubbing problem. This made me cringe because if i knew i messed up there is 100 bucks down the drain. so with much patience i got them to come out exactly how i wanted. http://i1223.photobucket.com/albums/...ps3ckgyz72.jpg http://i1223.photobucket.com/albums/...ps1yxgoqcc.jpg Here we go fingers crossed http://i1223.photobucket.com/albums/...psaeaaru1o.jpg One down, my goal was to cut enough for clearance and cut the little screw holes off from the stock fender mounting locations. http://i1223.photobucket.com/albums/...psjrqs5phn.jpg Rear marked and ready http://i1223.photobucket.com/albums/...psgjmrt2pi.jpg Bam cut/sanded/rounded and test mounted up (the rear looks squared off because of left over pen marks) http://i1223.photobucket.com/albums/...pssg13tykr.jpg http://i1223.photobucket.com/albums/...pslgcp174y.jpg http://i1223.photobucket.com/albums/...psnhweymuo.jpg http://i1223.photobucket.com/albums/...ps3wobqm2b.jpg http://i1223.photobucket.com/albums/...pspdoee3nh.jpg And going to be painting it this color and will be laying about 4 coats of automotive clear over it. http://i1223.photobucket.com/albums/...pss4duv2nn.jpg |
Re: Amoney's SCX10 II Build Thread: Getting back into it That's pretty nice. I don't think I've seen this particular colour before, look perfect! Envoyé de mon iPad en utilisant Tapatalk |
Re: Amoney's SCX10 II Build Thread: Getting back into it Awesome build brother! Love it actually. IMO put those damn TSL's back on her. Not a fan of the HY not scale Rax. I really dig the new body and your fender cuts!!!!! Can I ask where you picked the body up from? |
Re: Amoney's SCX10 II Build Thread: Getting back into it Looking sweet, got a set of Hyrax's myself that I am going to stick the Pro-Line Dual Stage Foams in to help with mounting them a bit, plus I hear it really makes a big difference in the tires. Also got a set of Voodoo KLR's Silver, will be interesting to compare the two :D. Just have to wait for VP to return my front axle, popped one of the screw heads off when I was trying to screw in the diff cover, it went in odd, went to unscrew it and off came the head of the screw so had to send it in so they could access my gears and get new parts and or replace it, not sure how that is going down but should probably have it back sometime next week. Might get Samix Front and Rear Shock Plates, see them on amain and in back order status at the moment but it looks like they add quite a few shock mounting points 9 for the front and 9 for the back from what I can see in the photos. |
Re: Amoney's SCX10 II Build Thread: Getting back into it *sigh* Now I really want a hardbody. Nice looking rig. Maybe I can convince my wife this is what I need for my birthday next month.... :lmao: -M |
Re: Amoney's SCX10 II Build Thread: Getting back into it Amoney, Any idea if these two kits are the same?? https://www.amazon.com/gp/aw/d/B01MT...3wL&ref=plSrch https://www.asiatees.com/display?Axi...d=119020&pid=1 The specs are the same but I am not entirely sure. -M |
All times are GMT -6. The time now is 03:01 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com