bilinvic's SCX10.2 Build Ver. 2

[luckster]

Great update. I have been thinking about that motor esc combo. Time to start shoving $$$ in a jar and get one. Truck still looks totally killer.

[cinnabun]

Nice update, great pics. I'm also in the market for a HH setup.. can't decide between the 3 kv levels.. trying to make an educated guess on which would be best with my 2 speed SSD kit

[Tossedman]

Originally Posted by bilinvic

The scale "harvest"!!!!

BC Bud!

[bilinvic]

Originally Posted by cinnabun

Nice update, great pics. I'm also in the market for a HH setup.. can't decide between the 3 kv levels.. trying to make an educated guess on which would be best with my 2 speed SSD kit

Thanxs cinnabun. You can't go wrong with any of the HH PP motors, but for 1.9 the 3500kV is way overkill IMHO. Also, with one of these motors, a 2-speed is definitely not required and is one more thing to possibly fail out on the trail...something to think about.

[cinnabun]

Originally Posted by bilinvic

Thanxs cinnabun. You can't go wrong with any of the HH PP motors, but for 1.9 the 3500kV is way overkill IMHO. Also, with one of these motors, a 2-speed is definitely not required and is one more thing to possibly fail out on the trail...something to think about.

Well I had trouble finding HH motors in stock so I ended up going with a mamba x and a tekin roc412. I think the 10.2 is going to find itself staying in 1st gear most of the time


Sent from my iPhone using Tapatalk

[bilinvic]

Still a wise choice, you will not be disappointed with a Tekin ROC412 series motor.

[not-required]

I'm running a 2200kv HH in my 10.2 rtr and I feel like it is a little too much wheel speed for me and I'm looking to gear down. I'm more of a slow crawler though.

Sent from my SM-G920V using Tapatalk

[Natedog]

Wrap turned out great, cage and Yota cab go together very well on this 10.2v2! Is that one piece rear bed aluminum panel available somewhere or is it another panel that you cut and bolted in? Kinda hard to tell wtih the scale harvest on top of it lol.

[fortyeightjake]

This is running the Incision link kit, correct?

[bilinvic]

Originally Posted by Natedog

Wrap turned out great, cage and Yota cab go together very well on this 10.2v2! Is that one piece rear bed aluminum panel available somewhere or is it another panel that you cut and bolted in? Kinda hard to tell wtih the scale harvest on top of it lol.

Thank you. The aluminum panels come with the cage section kit. I replaced the side panels with aluminum tread plate as well as the middle section under the "harvest".

Originally Posted by fortyeightjake

This is running the Incision link kit, correct?

Correct.

[monster 550]

I know you said you liked the rc4wd sliders for the v1, but what's your review on these after putting some time in with them? Thanks to you I ordered a set so they better be good. Also is that rifle from hunter Dan?

[bilinvic]

The 10.2 version of the RC4WD sliders are equally as good as determined from my crawl a few days ago. They will get better with age because I feel the coefficient of friction is better once the sections that usually slide on the rocks are bare steel, the paint/powdercoat feels too grippy! My only minor gripe is that I wish they could be adjusted slightly more inward. The rifle is from a Pro-Line parts pack I bough a couple years ago IIRC.

[monster 550]

Good to know thanks. Mine will be on a trail rig and won't get much abuse, but at least I'll know they can take it.

[honchojoe]

How did the front suspension handle once you fitted the limiters etc?

Great build by the way.

Sent from my SM-G930F using Tapatalk

[bilinvic]

The front end suspension travel didn't suffer at all with the limiters, the performance was incredible and for now, I will not be changing the front shocks at all.

[Sneetches]

You running the Xpert at 8.4v? Great looking rig as well.

[honchojoe]

Originally Posted by bilinvic

The front end suspension travel didn't suffer at all with the limiters, the performance was incredible and for now, I will not be changing the front shocks at all.

Thanks. I'll have to go back and have a look at exactly what you did.

Sent from my SM-G930F using Tapatalk

[bilinvic]

Thanxs Sneetches...My CC BEC is set to 8.3v

[allanon1965]

I have to get another 10.2 kit and build another rig! Gotta wait until the new house is going first though...

[photocycler]

Does the rockjock axles use scx2 internals? How do they compare to Scx 2 axles?


Sent from my iPad using Tapatalk