Mojave Body and RC4WD Rear Cage on my 10.2

[saddlesore]

Calling on all body mounting experts. I just got the RC4WD rear metal cage and Mojave body to convert my 10.2 to a truggy. Can anyone give me advice on how to mount the front cab of the Mojave body? Pics and descriptions would be awesome!

This is how it sits today mocked up.

Thanks in advance!

[excabswap]

Do you have a welder? Possibly a friend that welds? You could weld a bracket that kind of hooks over the rear of the cab then just body posts for the front like I did in the pic. Or you could weld posts to the rear cage that are short but long enough to stick into the rear of the cab about an inch through holes in the cab. That would make it look like the cage goes inside your cab but will also hold it in place.

If you look at my cage, that top bar actually hoops over the cab. That's the only thing holding it down in the rear. The cab it's cradled into my rock sliders.

Sent from my LG-H830 using Tapatalk

[saddlesore]

dammit i wish i could weld or knew someone who could weld. i would have saved myself $140.

[Honcho907]

I used an old servo mount and measured to the hight i wanted and used industrial strength velcro . Holds strong enough to wheel and no body clips

Sent from my SAMSUNG-SM-G891A using Tapatalk

[saddlesore]

Nice! What about for the back of the cab?

[Ghonda99]

How about if you had mounts come out sideways from the frame rails to secure the back of the cab.

[Honcho907]

Originally Posted by saddlesore

Nice! What about for the back of the cab?

Or this http://m.ebay.com/itm/body-shell-mou...257Ciid%253A12

Sent from my SAMSUNG-SM-G891A using Tapatalk