SCX10 II Spools & Gears from Devil RC
 

http://www.lockeduprc.net/images/logo/logo3dark.png

We are happy to now carry more Devilish options for your SCX10 II drivetrain.


The Devil SCX10 II Spool is a great budget replacement for your stock spool.
It features a tighter than stock fit and is hardened steel so it will last in conditions your stock spool will not survive.
http://www.lockeduprc.net/drivetrain...eds-170-07.jpg

The Devil SCX10 II heavy Duty Bevel Gear set (30T/8T) is a direct fit replacement for your Axial SCX10 II AR44 axles.
These gears are CNC machined from hardened steel and have the same ratio as stock gears.
http://www.lockeduprc.net/drivetrain...eds-170-14.jpg

The Devil SCX10 II Heavy Duty Transmission & Transfer Case gears are hardened steel and are helical for smoother operation.
These are direct replacement ratios for your truck.
http://www.lockeduprc.net/drivetrain...eds-170-13.jpg


Thanks for reading!
"thumbsup"

Re: SCX10 II Spools & Gears from Devil RC
 

Nice stuff! Is there a place to purchase from the web in the EU?


Sent from my LG-K520 using Tapatalk

Re: SCX10 II Spools & Gears from Devil RC
 

We have a single location in the USA ... but ship worldwide.
"thumbsup"

Re: SCX10 II Spools & Gears from Devil RC
 

Whats the advantage of having helical gears,beside reducing TT?

Re: SCX10 II Spools & Gears from Devil RC
 

What’s the Difference Between Spur, Helical, Bevel, and Worm Gears?

"thumbsup"

Re: SCX10 II Spools & Gears from Devil RC
 

I also bought your FI spool and rear shafts to fix my slop problem. Problem is the axles will not go into the spool all the way. They are 4mm shy of fitting. Should I have to file them? Stock axles are a perfect fit. Also, if I press them on in, I will never get them out without breaking stuff.

Thanks for the advice.

Sent from my SM-N920V using Tapatalk

Re: SCX10 II Spools & Gears from Devil RC
 

Yes, OT shafts with an FI spool are a tight fit.

If you do not want to assemble them that way you can lightly polish them until you get the fit you want. "thumbsup"


If you press them in without doing any sort of polishing they will be difficult to get out. People have done it and usually mock up a slide hammer of sorts.

...... maybe that's a tool we need to look into.

Re: SCX10 II Spools & Gears from Devil RC
 

Got it. I will slightly polish them as to get a very snug fit and not require a slide hammer to remove. Thanks for the fast response.

Re: SCX10 II Spools & Gears from Devil RC
 

The helical gears reduce torque twist?

Re: SCX10 II Spools & Gears from Devil RC
 

Not that I'm aware of.

The helical trans/tcase gears may reduce drag but I can't see those or the spiral bevel gears making an impact on TT.