Nukizer Truggy build2
 

So i ended up breaking the back off my previous nukizer build. was never quite the same after the daughter fell on it and broke it :(

Have been slowly ordering up parts for this build and running the standard Cherokee body.

Parts for this build:
Nukizer body cab
Rubicon Interior
Quicrun WP1080 esc
FTX Lightbar
BoomRacing ar44 axles
Boomerang 100mm remote reservoir shocks
Rod ends with steel pivots
scale bits
cheq plate
steel rod
pitbull rock beasts
3rd chan switch

Last package has arrived at work today so will pick that up later and get bulding. pics to follow this evening ;)

https://i.imgur.com/oGn8Us2h.jpg

Re: Nukizer Truggy build2
 

Is your daughter OK after falling on the truck?

Re: Nukizer Truggy build2
 

yes shes fine, was too busy watching her crawler and walked backwards over mine. ended up on her bum in a puddle.

Re: Nukizer Truggy build2
 

So first of all i needed to get the car sat how i wanted before building the cage.
https://i.imgur.com/AavoMDzh.jpg

I must say im massivly impressed by these shocks. i know my old ones were xtraspeed remote shocks (save your money) but these are a massive improvement and feel so smooth once built up. in the box you get spare set of hoses, 3 different internal spring rates (gold hard, silver med, black soft), spares, stickers, a nice tool for removing the piston, clear instructions if needed and a bag of spares.
https://i.imgur.com/a31Sloxh.jpg

the piston is nice and firm in the shock body with no play and you can take the reservoir apart allowing you to properly bleed the oil through.
https://i.imgur.com/WJNF65Bh.jpg?1

i went with 45wt oil to start with as i feel this rig will become heavy pretty quickly.

Re: Nukizer Truggy build2
 

Did you finish it?

Sent from my Pixel using Tapatalk

Re: Nukizer Truggy build2
 

Not yet. Ended up fitting a kitchen for the mother-in-law for Xmas. Have done the cage. Will get some pics up when home from work

Re: Nukizer Truggy build2
 

So these are a couple of quick pics.

shes going to be short, have cut the chassis back to the second hole in.
https://i.imgur.com/K2AP77P.jpg?1
https://i.imgur.com/tnx0WWE.jpg?1

please excuse the welds haha. hard to weld 5mm bar with 1mm welding wire. makes a mess really quickly. for some reason i could get them to stick strong enough for brazing.
the main hoop around the cab is 6mm steel bar, rear section is 5mm steel bar and the rock sliders are c section. i have drilled a hole though the top of the slider and put the main hoop inside and welded from the inside so there is no visible weld on the sliders.

Re: Nukizer Truggy build2
 

So christmas happened and i have built a cherokee hard body with the daughter so this got put on the back burner. back to it now though.

https://i.imgur.com/m8fSsUp.jpg?1
Got the chequer plate out and started to build the flat bed. ran it only as wide as the chassis rails and then angled over the transmission. hoping to mount the resivours for the rear shocks on the angled piece but we shall see if its strong enough as time goes on.

https://i.imgur.com/kRo0TDM.jpg?1https://i.imgur.com/nTauYjN.jpg?1
started adding the scale bits to the back and wired in the light. annoyingly i forgot to melt the braiding so it has frayed but its hidden so got away with it.

I have a few more scale bits to add and then onto the axles and setting up the suspension.
I have new bearings all round. I havnt taken the axles apart since i first built it so who knows what state im going to find those in. fingers crossed.

Re: Nukizer Truggy build2
 

The Cherokee in question got a running at the weekend!!! first sunny day of the year pretty much down here in cornwall so we headed to the beach to play on the rocks.
https://i.imgur.com/VBtOBmqh.jpg

So i forgot to take some pictures of the build so supprise its all done!!!
https://i.imgur.com/anRxFHlh.jpg
https://i.imgur.com/dMD14cdh.jpg

I finished off the suspension with some boomracing internal spring remote shocks 100mm. the front i used to middle spring and in the rear i used the hardest. 40wt oil all round to start the testing of the rig. surprisingly this set up works blooming well straight away. The fronts droop abit allowing it to point where and when i need it too and the back sits firm and perfect. the side hilling capability is good considering the weight of the steel cage. I plan on sorting some more scale accesssories for the bed and sort some lighting for the rig. have lost the light buckets but want a small light bar to go on the stinger and wire in the led for the rear bed. i also found some COB lights the same width as the chassis rails for abit of underlighting for night crawling.

https://i.imgur.com/VKMyme5h.jpg
https://i.imgur.com/rW3eTtOh.jpg
https://i.imgur.com/3fIssHGh.jpg
https://i.imgur.com/P6zHFUdh.jpg
https://i.imgur.com/nGGm0Mnh.jpg

more to come ;)
also any suggestions on a short light bar (70mm or less) please let me know.

Re: Nukizer Truggy build2
 

Looks good, whereabouts in Cornwall was that?

Sent from my Pixel using Tapatalk

Re: Nukizer Truggy build2
 

Build looks good, and you've got a very nice looking play area as well!

Re: Nukizer Truggy build2
 

Hey. That's in Falmouth at one of the hidden beaches. Loads of good spots here ;) we need to get on that moors crawl at some point!

Re: Nukizer Truggy build2
 

Definitely, when it dries out a bit!

Sent from my Pixel using Tapatalk

Re: Nukizer Truggy build2
 

Onetoomanyrcs 2 inch bar!

https://onetoomanyrcs.com/products/2...r-black-3v-30v

amazingly bright

Re: Nukizer Truggy build2
 

Thanks. Will see how much shipping is to the UK. Get stung with import annoyingly.

Re: Nukizer Truggy build2
 

The customs I can just about deal with, its Royal Mail's admin charge that pi$$es me off no end!!!
I often ask vendors to put a $1 valuation on the delivery label, that avoids customs but opens you up to insurance issues if the package goes missing.

Sent from my Pixel using Tapatalk