Go Back   RCCrawler Forums > Scale Rigs Brand Specific Tech > Axial Brand Scale Rock Crawlers > Axial SCX10 II
Loading

Notices

Thread: Transfer case output shafts!!!! Axial AX31410 Dlux to the rescue

Reply
 
LinkBack Thread Tools Display Modes
Old 11-20-2017, 04:33 PM   #1
Quarry Creeper
 
Join Date: Jul 2013
Location: PA
Posts: 320
Default Transfer case output shafts!!!! Axial AX31410 Dlux to the rescue

Been needing a transfer case output for my toyzuki build.... Eric from Dlux is open to make them if he can hit 10 orders... i ordered 5 to get the ball rolling so if you have been looking for a axial AX31410 shaft, please “pre-order” one!

http://http://www.dluxfab.com/#!/PRE-ORDER-AX31410-Dlux-version-transmission-shafts-Axial/p/83618306

Last edited by Lanky; 11-20-2017 at 05:08 PM.
Lanky is offline   Reply With Quote
Sponsored Links
Old 11-25-2017, 03:48 AM   #2
RCC Addict
 
Join Date: Nov 2016
Location: 1972 born Christian, Chinese.
Posts: 1,321
Default Re: Transfer case output shafts!!!! Axial AX31410 Dlux to the rescue

Quote:
Originally Posted by Lanky View Post
Been needing a transfer case output for my toyzuki build.... Eric from Dlux is open to make them if he can hit 10 orders... i ordered 5 to get the ball rolling so if you have been looking for a axial AX31410 shaft, please “pre-order” one!

http://http://www.dluxfab.com/#!/PRE-ORDER-AX31410-Dlux-version-transmission-shafts-Axial/p/83618306

Why would one need these? Any good? Yesterday just placed my very first SCX10 II Kit. So, I wonder why slow crawler still need these ?

I only had full SuperShafty transmission in my Wraith.
Teng is offline   Reply With Quote
Old 11-25-2017, 03:21 PM   #3
RCC Addict
 
Join Date: Oct 2006
Location: crawlifornia
Posts: 1,612
Default Re: Transfer case output shafts!!!! Axial AX31410 Dlux to the rescue

Quote:
Originally Posted by Lanky View Post
Been needing a transfer case output for my toyzuki build.... Eric from Dlux is open to make them if he can hit 10 orders... i ordered 5 to get the ball rolling so if you have been looking for a axial AX31410 shaft, please “pre-order” one!

http://http://www.dluxfab.com/#!/PRE-ORDER-AX31410-Dlux-version-transmission-shafts-Axial/p/83618306
I’m willing to bet there’s a Traxxas part out there somewhere that will work Just fine .
Get some numbered drill bits and and old broken slash drive shaft (or similar) and make one.
rockhugger is offline   Reply With Quote
Old 11-25-2017, 08:00 PM   #4
Quarry Creeper
 
Join Date: Jul 2013
Location: PA
Posts: 320
Default Re: Transfer case output shafts!!!! Axial AX31410 Dlux to the rescue

I have a few shafts that “work” and am currently running a yeti transfer case output that “works”..:. However, for me, at $10 bucks, id rather loose slop in the drive train. Obviously running a 1.5mm pin in a 2mm hole isn’t optimum.
Lanky is offline   Reply With Quote
Old 11-26-2017, 07:13 AM   #5
I wanna be Dave
 
Join Date: Jan 2005
Location: Raleigh-ish vicinity
Posts: 3,846
Default Re: Transfer case output shafts!!!! Axial AX31410 Dlux to the rescue

Quote:
Originally Posted by Lanky View Post
I have a few shafts that “work” and am currently running a yeti transfer case output that “works”..:. However, for me, at $10 bucks, id rather loose slop in the drive train. Obviously running a 1.5mm pin in a 2mm hole isn’t optimum.
Use a 2mm pin and grind flat spots into the ends so the pin fits into the gear. That's what I did with my Toyzuki t-case and there is zero slop.
svt923 is offline   Reply With Quote
Old 11-26-2017, 07:57 AM   #6
Rock Crawler
 
Join Date: May 2014
Location: Cluj-Napoca,Romania
Posts: 650
Default Re: Transfer case output shafts!!!! Axial AX31410 Dlux to the rescue

Any benefits for using these?
Traulus is offline   Reply With Quote
Old 11-26-2017, 09:06 PM   #7
Quarry Creeper
 
Join Date: Jul 2013
Location: PA
Posts: 320
Default Re: Transfer case output shafts!!!! Axial AX31410 Dlux to the rescue

Quote:
Originally Posted by svt923 View Post
Use a 2mm pin and grind flat spots into the ends so the pin fits into the gear. That's what I did with my Toyzuki t-case and there is zero slop.

I can not believe i didnt think of that!
Lanky is offline   Reply With Quote
Reply



Transfer case output shafts!!!! Axial AX31410 Dlux to the rescue - Similar Threads
Thread Thread Starter Forum Replies Last Post
axial transmision/transfer case greenjk General Crawlers 2 08-17-2011 06:31 AM
Transfer case/ axial axle demonoid369 General Crawlers 5 04-11-2011 06:48 PM
Axial Trans output shafts Gozer Axial AX-10 Scorpion 12 04-06-2009 01:02 PM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 12:03 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com