ISO 1/10 Ramcharger body
 

Ive tinkered on interweb and know i could probly find one new but would rather have one that someone bashed and are ready to part with. Rather give my money to one of yall before a large corp. Thank and God Bless in advance.

Re: ISO 1/10 Ramcharger body
 

Good luck. Only one I know of is a discontinued one by Proline.

Sent from my MHA-L29 using Tapatalk

Re: ISO 1/10 Ramcharger body
 

Try the wanted section.

Re: ISO 1/10 Ramcharger body
 

10-4. Aint been a member long enough to access Classified section. Sucks too. Wish i could. But rules are rules.

Re: ISO 1/10 Ramcharger body
 

Or the Vendors Paint and Body section. Newbie problems i reckon. Aint no biggie. Opportunity will knock when its suppose to

Re: ISO 1/10 Ramcharger body
 

I've got one it's black on an scx10. It's new only test run. Put back in the box. Stock truck, with old school proline flat irons. I stole the servo out of it. It came out very nice. Ya, you never see that body. There's also a cage convertible body too. Don't know which is rarer. But I've seen less of the non caged ramcharger bodys myself. Good luck trying to find one. Don't think I've got a new unpainted one?

Re: ISO 1/10 Ramcharger body
 

Thanks my man. Im a Mopar fellar. And i hate that its not more common of a body. Hell, i’d like to find 2 so i could make 1 a pickup.

Re: ISO 1/10 Ramcharger body
 

My friend have the cage convertible body on a scx 10, and i know for sure if they made a full body mid 80ties ram charger body he would snag up at least 3 of them.

https://billeder.bazoom.dk/rc/galler...ramcharger.jpg
WHY picture.
https://billeder.bazoom.dk/rc/galler...ramcharger.jpg

He have a 1:1 1984 ram charger too, not that it will ever drive on the streets again, only value more or less in it is its rebuild engine

The 1:10 body IMO are a tad narrow.

Re: ISO 1/10 Ramcharger body
 

Man I’ve been hoping for a ram charger body to rear it’s ugly head, if I could find one I’d make a low rider out of it, just like the 1:1 I sold my buddy. I should have never gotten rid of it, I was just tired of the hacked up suspension it was riding on, I couldn’t even hit a 1” deep pothole the ride was so rough.

Re: ISO 1/10 Ramcharger body
 

The one my friend have,,,, welll truth be told it should never have left the States, actually i think the states and any other country should be forbidden to export such garbage.

My friend even got a second one to barely keep one on the road.

And as it is having been sitting idle outside for a couple of years i am pretty sure to get it approved for the road you need a lot.
Primarily you need to fix the oil leak, probably between engine and gearbox.
But if you also decided to do the rust work on it, well you will have to spend a crapload of hours in the garage.

And in that case i think he should throw money at his 1958 Apache stepside that have been sitting idle for +20 years.
https://78.media.tumblr.com/6e6bbcb7...8ejo1_1280.jpg

TBH i would like a body of these old Chevy too, and they did come in 4 x 4 back then, so highly valid i think.
And both step and fleet side should be doable i think.

Re: ISO 1/10 Ramcharger body
 

That cab brings back memories, I had a light blue 67 Chevy truck when I was 15-16 years old. It had an in-line six banger, stepside, 4x4, but it had that lil indentation where the spare tire bolted to the outside of the box. It was my first vehicle.

Re: ISO 1/10 Ramcharger body
 

The one that peaker is showing off is more common in these parts of the woods.

Re: ISO 1/10 Ramcharger body
 

Looks like Proline is going to come out with one, but it's a pretty weak attempt.

https://www.bigsquidrc.com/wp-conten...est-2019-2.jpg

Re: ISO 1/10 Ramcharger body
 

OH MY GAWD first time i saw the price on that thing...
NINETY ($90!!!) DOLLARS?!?!

the traxxas bronco is WAY better for that price! not a single damn molded plastic part on that proline thing. i was considering one until i saw that tag. WOOF.

*just realized this might be the second entry in their METRIC series?

Re: ISO 1/10 Ramcharger body
 

MSRP is usual higher than what you buy it for (Actual retail price).

Curious as to what the "3 pieces" are... Body, roof and..... ?

Re: ISO 1/10 Ramcharger body
 

Interior?

Looks like there is something there through the wheel well and it would make sense since the top is removable.

Re: ISO 1/10 Ramcharger body
 

Yeah, there were a couple pics of it floating around with an interior. Weak attempt by Pro-Line in my opinion. You can buy the Axial '69 Blazer body that is much better detailed with a molded grille and roll cage for around $60.