overdrive transfer case Working on a new mod to overdrive the front axle with the stock transfer case. Currently in the works is making a new through shaft that will be longer so the rear drive shaft hooks up from a new ouput. heres my mockup https://imagizer.imageshack.com/v2/6...924/GI4btN.jpg https://imagizer.imageshack.com/v2/6...923/7uEMvq.jpg https://imagizer.imageshack.com/v2/6...924/69MMls.jpg |
Re: overdrive transfer case The shaft is still a work in progress. so for now I have put this thing back together and moved the motor forward more and changed the shock mounting for a lower center of gravity. looks great and performs even better. The new servo is working pretty good too. https://www.youtube.com/watch?v=12LX...ature=youtu.be https://imagizer.imageshack.com/v2/6...921/mK6i0v.jpg https://imagizer.imageshack.com/v2/6...922/XN2Cw5.jpg https://imagizer.imageshack.com/v2/6...923/zPKAPH.jpg https://imagizer.imageshack.com/v2/6...922/jybjb6.jpg https://imagizer.imageshack.com/v2/6...923/pNq9nL.jpg https://imagizer.imageshack.com/v2/6...924/E1WqcH.jpg |
Re: overdrive transfer case Excellent outside the box thinking! Keep us posted"thumbsup" |
Re: overdrive transfer case Little progress on the shaft it self. I decided not to add the hole which is only for 2 speed. the transfer case gear pin will keep the shaft from moving forward or back and then the extra end hole is for the rear driveshaft to hook up right out of the transfer case. https://imagizer.imageshack.com/v2/6...924/RWCsKK.jpg https://imagizer.imageshack.com/v2/6...922/bg396a.jpg Also updated my battery tray to sit a little lower and flat. I like having the strap again for the battery, I was just using the new Velcro but in a hard fall the battery would always pop off. https://imagizer.imageshack.com/v2/6...921/aJThPH.jpg |
Re: overdrive transfer case Fitment was close to perfect for a 1st draft. but i might make some minor adjustments in hole placement and shaft length. https://imagizer.imageshack.com/v2/6...922/djGKZR.jpg https://imagizer.imageshack.com/v2/6...923/zYMVdB.jpg https://imagizer.imageshack.com/v2/6...924/kGRrSt.jpg https://imagizer.imageshack.com/v2/6...924/byLLjV.jpg |
Re: overdrive transfer case |
Re: overdrive transfer case That's awesome! |
Re: overdrive transfer case about 15 packs on the overdrive mod and new JX CLS 6336 servo and I'm beating on it pretty hard. I'm working on a write up now with step by step what I did using the axial 10ii PDF. no issues and no gear slop for both so that's cool "thumbsup" couple action shots because if there isn't pics it didn't happen right https://imagizer.imageshack.com/v2/8...924/byLLjV.jpg https://imagizer.imageshack.com/v2/8...923/EbPbTh.jpg https://imagizer.imageshack.com/v2/8...921/MJYc9b.jpg https://imagizer.imageshack.com/v2/8...924/xWfPEv.jpg |
Re: overdrive transfer case Quote:
Quote:
|
Re: overdrive transfer case Quote:
side note.... editing a PDF is a PITA. I might just take everything back apart and go one step at a time taking pictures, but my comp is June 9th and I don't feel like tearing it back apart at the moment haha. |
Re: overdrive transfer case You're welcome, you thought of it and made it happen! OK, thought so, hard to tell in pictures sometimes. :) Free PDF editor reviews: https://www.lifewire.com/best-free-pdf-editors-4147622 https://www.techradar.com/news/the-best-free-pdf-editor |
Re: overdrive transfer case anyone have a clue for what material axial, vaterra, traxxas uses for shafts? 304 stainless maybe........ going to order some rod from McMaster-Carr Thanks! |
Re: overdrive transfer case It's not stainless (stainless is too generally weak especially for this type of application), some kind of somewhat hardened steel. :) |
Re: overdrive transfer case Screw it.. stock up on Chromo Rod! Upgrade the upgrade! Please put me down for a few shafts if you decide to get a vendor star and offer these... |
Re: overdrive transfer case I think 5544T242 or 8927K24 McMaster, will work fine. It’s twice as strong as 304 stainless |
Re: overdrive transfer case Quote:
|
Re: overdrive transfer case Quote:
Quote:
Yes the 7742..... 8) |
Re: overdrive transfer case Looks great. i new this tranny had potential as a super scale item. YOu did a great job of executing. I wonder how many people have thought of this, but not acted on the idea. "thumbsup" |
Re: overdrive transfer case Any updates on this Mod? How much overdrive does it provide? |
Re: overdrive transfer case Quote:
I was keeping everything together for a comp this past weekend which I placed 1st in class 2. This mod gives you a 30% increase in overdrive for the front axle I will eventually get the rig torn apart and a build thread made soon. I'm taking a whole week off work for a staycation so hopefully I can get it done then. |
All times are GMT -6. The time now is 05:40 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com