| |
| |||||||
 |
| | LinkBack | Thread Tools | Display Modes |
04-29-2019, 11:28 AM
| #121 |
| Quarry Creeper Join Date: Aug 2017 Location: Tyler
Posts: 414
|  Re: ''Cherokee To Chuggy'',a AMW built SCX10 2 Close up look   They do have sidewall reinforcement lugs   I cut the sidewall support lugs out with a flush cutter and used a leather hole punch to punch 4 2mm holes. I highly recommend cutting the sidewall lugs out of any tire to soften the rubber which increases traction and allows the foam and tire to work in harmonious balance. Also if the tire is not VENTED the foam and tire CANNOT conform resulting in a air tight stiff tire. I recommend a minimum of 3 vent holes in a tire. The more vent holes to a tire the softer and faster the tire / foam can conform, compress and decompress.  |
|  |
| Sponsored Links | |
| | |
|
04-29-2019, 11:42 AM
| #122 |
| Quarry Creeper Join Date: Aug 2017 Location: Tyler
Posts: 414
| Re: ''Cherokee To Chuggy'',a AMW built SCX10 2 all mounted up Foams Are Crawler Innovations 4.50" Lil Nova Comp Cut Foams. P/N; CWR-2025 front and CWR-2026 rear. Vanquish Products OMF Wheels     New Shoes look good  |
|
| |
|
04-29-2019, 11:44 AM
| #123 |
| Quarry Creeper Join Date: Aug 2017 Location: Tyler
Posts: 414
| Re: ''Cherokee To Chuggy'',a AMW built SCX10 2 More      |
|
| |
|
05-02-2019, 08:08 PM
| #124 |
| Quarry Creeper Join Date: Sep 2013 Location: Hicktown
Posts: 295
| Re: ''Cherokee To Chuggy'',a AMW built SCX10 2
This thing is awesome. Keep up the good work!
|
|
| |
|
05-08-2019, 09:51 AM
| #125 | |
| Quarry Creeper Join Date: Aug 2017 Location: Tyler
Posts: 414
| Re: ''Cherokee To Chuggy'',a AMW built SCX10 2 Quote:
Thank You! | |
|
| |
|
07-11-2019, 08:55 AM
| #126 |
| Quarry Creeper Join Date: Aug 2017 Location: Tyler
Posts: 414
| Re: ''Cherokee To Chuggy'',a AMW built SCX10 2 Time has passed without me updating this build thread and alot has changed!  On May 4 at the Activated Outlaw Get together after we had finished running courses I took the Chuggy on a trail ride around the park. I was climbing a 20 ft hill climb covered with small stones and at the top of the climb the Chuggys front axle broke!      Not only did the Axle C break but the axle shaft was destroyed! This starts the Rebuild That took place from May 4 to June 1 of 2019! |
|
| |
|
07-11-2019, 09:08 AM
| #127 |
| Quarry Creeper Join Date: Aug 2017 Location: Tyler
Posts: 414
| Re: ''Cherokee To Chuggy'',a AMW built SCX10 2 Back at the workshop, time to investigate the damage.      New VP Goods  |
|
| |
|
07-11-2019, 09:12 AM
| #128 |
| Quarry Creeper Join Date: Aug 2017 Location: Tyler
Posts: 414
| Re: ''Cherokee To Chuggy'',a AMW built SCX10 2 More Pics    Axle Tear-down   |
|
| |
|
07-11-2019, 09:15 AM
| #129 |
| Quarry Creeper Join Date: Aug 2017 Location: Tyler
Posts: 414
| Re: ''Cherokee To Chuggy'',a AMW built SCX10 2      |
|
| |
|
07-11-2019, 09:28 AM
| #130 |
| Quarry Creeper Join Date: Aug 2017 Location: Tyler
Posts: 414
| Re: ''Cherokee To Chuggy'',a AMW built SCX10 2 I got tired of the rust so it is time to paint the chassis, New panel skins, new motor, and reinstate the Chuggy!   After tens of hours these sliders are bent out of shape and dented. So it is time to reinstate them.  Bam! I first straightened the sliders and then used 60 grit to 600 grit sand paper to sand these sliders smooth again!   |
|
| |
|
07-11-2019, 09:32 AM
| #131 |
| Quarry Creeper Join Date: Aug 2017 Location: Tyler
Posts: 414
| Re: ''Cherokee To Chuggy'',a AMW built SCX10 2 More Pics   Tens of hours on these panels but it is time for new Skins!     |
|
| |
|
07-11-2019, 09:35 AM
| #132 |
| Quarry Creeper Join Date: Aug 2017 Location: Tyler
Posts: 414
| Re: ''Cherokee To Chuggy'',a AMW built SCX10 2      |
|
| |
|
07-11-2019, 09:40 AM
| #133 |
| Quarry Creeper Join Date: Aug 2017 Location: Tyler
Posts: 414
| Re: ''Cherokee To Chuggy'',a AMW built SCX10 2 The grill is in need of a rebuild.  Alright 3 coats of Grey Steele It, given a couple days to dry.     |
|
| |
|
07-11-2019, 09:46 AM
| #134 |
| Tire&Foam Extraordinaire   Join Date: Jun 2007 Location: C.I. Compound, Tyler, Texas
Posts: 5,585
| Re: ''Cherokee To Chuggy'',a AMW built SCX10 2
Great rebuild Gavin. Thank you for giving of your time to edit and post your work for myself and others to view and enjoy. Thankfully RCC exists to serve as an online journal for every members build. Keep buildin' & postin' y'all  |
|
| |
|
07-11-2019, 10:50 AM
| #135 |
| Quarry Creeper Join Date: Aug 2017 Location: Tyler
Posts: 414
| Re: ''Cherokee To Chuggy'',a AMW built SCX10 2 More Pics  New motor because I am trying to get low end throttle control. Trinity Monster Max Torque 21.5 with factory timing.  12 tooth pinion which is the lowest you can gear this trans.   Time to Assemble!  |
|
| |
|
07-11-2019, 10:51 AM
| #136 | |
| Quarry Creeper Join Date: Aug 2017 Location: Tyler
Posts: 414
| Re: ''Cherokee To Chuggy'',a AMW built SCX10 2 Quote:
Thanks Dad! | |
|
| |
|
07-11-2019, 11:55 AM
| #137 |
| Quarry Creeper Join Date: Aug 2017 Location: Tyler
Posts: 414
| Re: ''Cherokee To Chuggy'',a AMW built SCX10 2 Axles, Drive train, and Electronics In!    Interior painted, front grill rebuilt, and new panel skins!   |
|
| |
|
07-11-2019, 11:57 AM
| #138 |
| Quarry Creeper Join Date: Aug 2017 Location: Tyler
Posts: 414
| Re: ''Cherokee To Chuggy'',a AMW built SCX10 2 More!      |
|
| |
|
07-11-2019, 12:01 PM
| #139 |
| Quarry Creeper Join Date: Aug 2017 Location: Tyler
Posts: 414
| Re: ''Cherokee To Chuggy'',a AMW built SCX10 2 Continue      |
|
| |
|
07-11-2019, 12:04 PM
| #140 |
| Quarry Creeper Join Date: Aug 2017 Location: Tyler
Posts: 414
| Re: ''Cherokee To Chuggy'',a AMW built SCX10 2   Now I present the Chuggy!    |
|
| |
|
| Tags |
| #activatedoutlaw, #ayalametalworks, #crawlerinnovations |
''Cherokee To Chuggy'',a AMW built SCX10 2 - Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| WJ Grand Cherokee Built with SCX10 II featured with front placed transmission | clarketian | 1.9 Scale Rigs | 10 | 10-01-2019 11:19 PM |
| the old blue chuggy | 4x4boy | 2.2 Scale Rigs | 13 | 12-08-2009 08:36 PM |
| Thread Tools | |
| Display Modes | |
| |
Linear Mode
