04-07-2019, 07:20 PM | #1 |
Rock Stacker Join Date: Feb 2018 Location: United States
Posts: 99
| Dlux Hamberger
I just recently picked up a used Hamberger trans with MT metal gears for my 10.2 and wanted to know is anyone running one and how do they like it. On paper I like everything about it, have no real world experience with it. Also what pinion sizes are you running with it in your setup? Im used to the basic 3 gear style Axial trans, so the Hamberger is a little out of my realm.
|
Sponsored Links | |
04-08-2019, 08:23 AM | #2 | |
Rock Stacker Join Date: Jan 2009 Location: nor-cal
Posts: 73
| Re: Dlux Hamberger Quote:
It’s not a complete bolt on part you have to do a little finessing to make it fit and run smooth. Also my WB is 11.4 so I had to cut down my drive line. For gearing the MT metal gears you must use .6 mod pinion. The smallest gear you can run without modification is a 16 tooth pinion. I use a 14 tooth for a 13T HH crawlmaster. But I had to grind the center shaft a little. | |
04-08-2019, 12:13 PM | #3 |
Rock Stacker Join Date: Feb 2018 Location: United States
Posts: 99
| Re: Dlux Hamberger
Awesome info thank you! I’m a 12” wb so I’m thinking it should fit well. I’ll be running either a 27 or 35 turn HH Trailmaster Sport on 3s. I’m excited to see all the hype about these. I’ve Hearn nothing but good things about them. Sent from my iPhone using Tapatalk |
04-09-2019, 02:51 PM | #4 |
Rock Stacker Join Date: Feb 2018 Location: United States
Posts: 99
| Re: Dlux Hamberger Sent from my iPhone using Tapatalk |
04-09-2019, 04:34 PM | #5 |
Rock Stacker Join Date: Jan 2009 Location: nor-cal
Posts: 73
| Re: Dlux Hamberger
I see you didn’t use the spacer between the motor and motor plate. How where you able to clear the center top shaft. Here’s a picture of mine with the spacer. Sent from my iPhone using Tapatalk |
04-09-2019, 11:26 PM | #6 |
Rock Stacker Join Date: Feb 2018 Location: United States
Posts: 99
| Re: Dlux Hamberger
I picked up the trans used, so the previous owner cut the shaft flush with the plate and bearing. Sent from my iPhone using Tapatalk |
04-10-2019, 06:42 AM | #7 |
Rock Stacker Join Date: Jan 2009 Location: nor-cal
Posts: 73
| Re: Dlux Hamberger
Nice, I’m going to have to do that myself.
|
04-18-2019, 10:47 PM | #8 |
Quarry Creeper Join Date: Dec 2015 Location: Sutter
Posts: 489
| Re: Dlux Hamberger
I keep going back and forth on grabbing one of these. The open gears just make me nervous. Sent from my iPad using Tapatalk |
04-19-2019, 08:47 AM | #9 |
RCC Addict Join Date: Dec 2007 Location: Rochester Hills
Posts: 1,773
| Re: Dlux Hamberger
Someone makes a 3D printed cover for that trans. I’m sure someone here will chime in on the name. You can’t go wrong with Dlux! Later, Farmer |
04-19-2019, 08:50 AM | #10 |
Rock Stacker Join Date: Jan 2009 Location: nor-cal
Posts: 73
| Re: Dlux Hamberger |
04-19-2019, 09:58 AM | #11 | |
Rock Stacker Join Date: Feb 2018 Location: United States
Posts: 99
| Re: Dlux Hamberger Quote:
Fishs crawler parts. https://www.fishscrawlerparts.com/st...Wrapper.html#/ Sent from my iPhone using Tapatalk | |
04-19-2019, 10:10 AM | #12 | |
Quarry Creeper Join Date: Dec 2015 Location: Sutter
Posts: 489
| Re: Dlux Hamberger Quote:
Thanks good sir!! Sent from my iPhone using Tapatalk | |
Thread Tools | |
Display Modes | |
| |