UMG10 CVD help Can someone recomeny a CVD kit to replace the stock wildbord HD once. And what lenght do they need to be ? :) |
Re: UMG10 CVD help Two different parts, driveshafts (wild boar ) and the axels are cvds Hang up and Drive |
Re: UMG10 CVD help Measure the length stuffed, measure the length unstuffed. There's your min and Max lengths. |
Re: UMG10 CVD help The front shaft will be the same as the SCXII Cherokee kit, while the rear will need to be about 25 mm shorter. Junfac lists their SCXII 12.3 inch wheelbase driveshaft set as coming with a 82-117 mm shaft for the front and a 120-155 mm shaft for the rear. With the shorter wheelbase of the UNG10, one of their 95-130 mm shafts would be used for the rear. Obviously you can go with your preferred driveshaft brand of choice but that should give an idea of the sizes needed. |
Re: UMG10 CVD help Why change the driveshafts? WB8 HD are very nice shafts that are strong. |
All times are GMT -6. The time now is 07:21 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com