RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Axial SCX10 II (http://www.rccrawler.com/forum/axial-scx10-ii/)
-   -   MeanTT’s UMG10 (http://www.rccrawler.com/forum/axial-scx10-ii/608710-meantt%92s-umg10.html)

MeanTT 06-24-2019 07:49 PM

Re: MeanTT’s UMG10
 
So I learned that the portals need a deep 12 mm drive not to avoid interference. The 350 hubs don’t work. In fact most of my wheels don’t work without interference. I seem to collect a lot of wheels and tires...

I learned that despite the portals the rc4wd deep dish simply don’t fit. So I went with these Chinese specials...

https://uploads.tapatalk-cdn.com/201...2025a57307.jpghttps://uploads.tapatalk-cdn.com/201...6b342137ed.jpghttps://uploads.tapatalk-cdn.com/201...a6db1e0aac.jpghttps://uploads.tapatalk-cdn.com/201...450f03433f.jpg

I have the wide MT/Rs but they don’t fit on the wheels I have. I have an old set of 2.2 rims that might work for them because they are super wide. Seems to be plan since Mogs often have large wheels as don’t have a high profile tire.

This was my first time running the MT/Rs and I thought they were middle of the road. The portals and Werty Made sliders worked nicely.

I noticed that I have a lot of body lean now. I think I may need to tweak the suspension to avoid it. More tinkering to come. And scale stuff!


Sent from my iPhone using Tapatalk

MeanTT 06-24-2019 09:22 PM

Re: MeanTT’s UMG10
 
Problem solved! 1.9 wide MT/Rs stretched on super wide 2.2s from Hot Racing. Looks great. Think I’m sticking with this!

https://uploads.tapatalk-cdn.com/201...a7fecb80c0.jpghttps://uploads.tapatalk-cdn.com/201...556cb53772.jpghttps://uploads.tapatalk-cdn.com/201...e060304cdf.jpg


Sent from my iPhone using Tapatalk

MeanTT 06-25-2019 07:02 PM

Re: MeanTT’s UMG10
 
Wow. Love this look. I switched out the 2.2 closed cell foams and used the stock MT/R foam which stretched over 2.2s without issue. Also clipped the sliders so they didn’t run. I need to mess with the suspension next, but this seems far more capable with these wheels, tires and the portals. The weight down low is noticeable. I can also see the foams working a lot, even on relatively flat stuff. That will increase once these foams get wet. FYI these 2.2 wheels are in unfinished steel, so they rust just like the real things!

A few more from the back yard. I do t know why we haven’t seen more 2.2 stretched looks on this rig. This is the one rig where it actually LOOKS MORE SCALE! I actually got to use the skids on some dirt and a few rocks. Much better [emoji1303]

https://uploads.tapatalk-cdn.com/201...c814ae4350.jpghttps://uploads.tapatalk-cdn.com/201...1f1287f75e.jpghttps://uploads.tapatalk-cdn.com/201...a6ceeb5166.jpghttps://uploads.tapatalk-cdn.com/201...ee3b5fb79a.jpghttps://uploads.tapatalk-cdn.com/201...63d6dcdb25.jpghttps://uploads.tapatalk-cdn.com/201...d2200d3ef5.jpghttps://uploads.tapatalk-cdn.com/201...fc1d5973d9.jpghttps://uploads.tapatalk-cdn.com/201...af6365703e.jpghttps://uploads.tapatalk-cdn.com/201...0d441cd255.jpghttps://uploads.tapatalk-cdn.com/201...3b3ea6c79c.jpg


Sent from my iPhone using Tapatalk


All times are GMT -6. The time now is 11:42 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com