What shocks to get?

[pullstarter]

Hey guys,
Like just about everyone else I'm suffering from leaky shock syndrome (and springs popping off the perches) What shocks are people using to avoid leakiness? I've heard the TRX4 shocks are quite good, anything else that's worth getting? Also, what springs are you guys using on them? Not afraid to spend on good ones

Cheers
Simon

[StomperCrawler]

Traxxas big bores FTW! Best deal is tra4962 which comes with enough to do 2 rigs for $60.

[pullstarter]

Are big bores okay length wise for the SCX10? I thought they might be a bit long?

Cheers
Simon

[MrLee1990]

Boomerang™ Type G Piggyback Internal Spring Shocks w/ Functional Reservoir
i run these in the 100mm version. they sag nicely to give a good ride height.

[StomperCrawler]

Originally Posted by pullstarter

Are big bores okay length wise for the SCX10? I thought they might be a bit long?

Cheers
Simon

Scx10 shocks are 90mm eye to eye. Traxxas big bores part numbers... metal: 2660=83mm eye to eye extended, 2661=93mm, 2662=100mm, 4962 (8pcs)=100mm, plastic: 3760=75mm, 3672=?.

[Dbx]

Originally Posted by StomperCrawler

Scx10 shocks are 90mm eye to eye. Traxxas big bores part numbers... metal: 2660=83mm eye to eye extended, 2661=93mm, 2662=100mm, 4962 (8pcs)=100mm, plastic: 3760=75mm, 3672=?.

I run Big Bores and love them. Much better quality than anything else I've tried. They make the stock icons look like they should come out of a christmas cracker. I run 2661's up front, and they fit fine. I use the stock SCX10ii springs - they fit over the big bores, but you can't use the spring collars.
I run 2660's at the back, but that's with custom rear hoops to suit a pickup.

[Teng]

Originally Posted by pullstarter

Hey guys,
Like just about everyone else I'm suffering from leaky shock syndrome (and springs popping off the perches) What shocks are people using to avoid leakiness? I've heard the TRX4 shocks are quite good, anything else that's worth getting? Also, what springs are you guys using on them? Not afraid to spend on good ones

Cheers
Simon

Wanna something high performance and yet still very handsome shocks. Look no further to these vendors

https://supershafty.com/collections/...ple-cap-shocks

Comp Shocks 92mm – DravTech

and

Dlux Fab

[westerlycarrot9]

People don't really use internal spring shocks on scale crawlers do they? OP, you could also check out the King Shocks by RC4WD. Or the Pro-Line PowerStroke Scaler shocks.

[Teng]

Pro-line powerstroke scaler is good. Just don’t buy the RC3WD

[Jeep757]

Is there a spring assortment set that works with the PL Scaler shocks for tune ability?

[Stollenritter]

Originally Posted by pullstarter

Are big bores okay length wise for the SCX10? I thought they might be a bit long?
Cheers
Simon

Not exactly the same, but you can choose a tad longer or shorter:



14mm Axial springs work fine on the Traxxas shocks with (Traxxas) spring collars. 12.5mm springs (as used on the SCX10-2 kits) work on Traxxas shocks without collar but will rub the shock body slightly.

[westerlycarrot9]

Originally Posted by Teng

Pro-line powerstroke scaler is good. Just don’t buy the RC3WD

What's so bad about the King shocks?

[Dbx]

They’re ok. Underdamped for my preference (and compared to big bores). They are not as smooth or leak resistant as the BB’s. The dual spring thing is just for show and leads to the mid collar that binds up with use.

[westerlycarrot9]

Originally Posted by Dbx

They’re ok. Underdamped for my preference (and compared to big bores). They are not as smooth or leak resistant as the BB’s. The dual spring thing is just for show and leads to the mid collar that binds up with use.

Opinions on the internal spring shocks?

[pullstarter]

Thanks for the info guys! All very helpful!

[pullstarter]

No fans of the TRX-4 shocks?

[Erbing]

I use the trx4 shocks, no leaks and they have a few different springs u can use for tuning.

[Natedog]

Originally Posted by Stollenritter

Not exactly the same, but you can choose a tad longer or shorter:

14mm Axial springs work fine on the Traxxas shocks with (Traxxas) spring collars. 12.5mm springs (as used on the SCX10-2 kits) work on Traxxas shocks without collar but will rub the shock body slightly.

Great info, I've used the shorter Traxxas BB on a build, nice options.

Originally Posted by Erbing

I use the trx4 shocks, no leaks and they have a few different springs u can use for tuning.

TRX-4 shocks are the new scale standard, no leaks, smaller diameter therefore more scale looking, durable.

[Jeep757]

What's the part# for the trx4 shocks

[allanon1965]

Originally Posted by Jeep757

What's the part# for the trx4 shocks

they are all over ebay....

https://www.ebay.com/itm/TRX-4-Tacti...19.m1438.l2649