RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Axial SCX10 II (http://www.rccrawler.com/forum/axial-scx10-ii/)
-   -   6x6 durability? (http://www.rccrawler.com/forum/axial-scx10-ii/614604-6x6-durability.html)

kikcaffine 01-09-2020 09:29 PM

6x6 durability?
 
N ow that these have been out for a while, have the issues they had when they first came out been resolved? Are these still experiencing issues with their center axles stripping out? Has anyone had any issues running these with more power than the stock motor can put out? Overall have people that have bought these been satisfied with them?

Rcdood 01-10-2020 08:40 AM

Re: 6x6 durability?
 
Mines been rock solid so far, no issues with the center axle "thumbsup"

I am running a Trailmaster 550 21t, so not insane amounts of power.
Its a really fun truck for the trails.

Griffin 01-10-2020 08:52 AM

Re: 6x6 durability?
 
I've never had an issue with the center axle stripping out and I'm running a Trailmaster 550 21T as well. I did lose the driveshaft between the two rear axles and the snorkel ripped out. The body has cracked in the front by the grill (weak lexan) but that was probably more due to letting some 5 and 6 year olds drive it around the ranch unsupervised. Come to think of it, that's when the snorkel ripped out the second time and I never found it.

Druxus 01-13-2020 01:14 AM

Re: 6x6 durability?
 
While I don't have axial 6x6 I do have a cross rc hc6. The middle axle gears see allot of use due to the fact it is being driven and a drive axle. I have had to replace the gears in the middle axle, when I did I checked the front and rear and I had very little wear.

JacktheRipper 01-13-2020 04:38 AM

Re: 6x6 durability?
 
Quote:

Originally Posted by Druxus (Post 5990144)
While I don't have axial 6x6 I do have a cross rc hc6. The middle axle gears see allot of use due to the fact it is being driven and a drive axle. I have had to replace the gears in the middle axle, when I did I checked the front and rear and I had very little wear.


That is a great looking truck, eyeing for a future build. Set of gears cannot be all that bad $$ or service wise.

pep

kikcaffine 01-13-2020 08:23 AM

Re: 6x6 durability?
 
I ended up pulling the trigger on one, its been great for the 15 minutes it ran until the stock servo stopped steering. Bought a reef's and have no doubt this truck will be great.

RcKirb 04-30-2020 08:58 PM

Re: 6x6 durability?
 
Just picked up one today will report back on reliability issues if any... can,t wait to run it thing looks great "thumbsup"

MAGNUMB 07-27-2020 12:36 PM

Re: 6x6 durability?
 
Quote:

Originally Posted by RcKirb (Post 6018663)
Just picked up one today will report back on reliability issues if any... can,t wait to run it thing looks great "thumbsup"

Still waiting on this report.....you ok?

soze 07-27-2020 01:31 PM

Re: 6x6 durability?
 
I'll start working on mine soon. Haven't even powered it up yet, but I've already got some stuff lined up to do for it. I'll have to see if I have any issues with the middle axle as well.


All times are GMT -6. The time now is 04:21 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com