Will AR60 lower link mounts work on a scx10ii ar44 axle?

[MikeDean]

I purchased a pair of AR44 axles to replace the redcat axles on my rig.

Because of how my rig is setup i am having a hard time finding a happy spot for the lower links and shocks to be on the axles.

I see that the AR60 has lower link mounts that allow the shocks and lower links to be on top of each other where the stock AR44 mounts are setup such that the shocks or links (one or the other) need to be mounted outboard.

Can anyone confirm if the AR60 lower link mounts would fit on a AR44 axle? Mostly curious if the two holes are the same width apart on both axles.

Picture is out of the bomber kit manual. Looks like they could fit but not sure...

Thanks!

[MikeDean]

I also looked for AR44 lower link mounts and it seems all aftermarket ones are the stock design. There are some china ones on ebay i think would work but really would prefer not to order those ones.

Just checked and it appears that the AR60 mounts use M3 screws while the AR44 uses m2.6. I think i could overcome this if the holes are the same distance apart center-to-center.

[MikeDean]

picture of the ar44 mounts

[MikeDean]

Hey bud. Yes they will fit. At least the ones I got off amazon for $12!

They will give you way more options for mounting your shocks in line w your links. You may have to drill out the stock m2.6 axle to fit the included m3 screws through. It even comes with screws and nuts. The link mounts have recessed holes for the m3 nuts too.check it out.


Sent from my iPhone using Tapatalk

[MikeDean]

Dude that is awesome. Thanks mike dean.

For anyone else wondering, yes, ar60 lower link mounts should fit scx10ii axle. The hole to hole distance on ar60 links is 7.5mm just like ar44 axle. Awesome!!


Sent from my iPhone using Tapatalk

[MikeDean]

Link to amazon China links

Alloy Dual Lower Shock Link Mount for 1/10 RC Crawler Axial Wraith 90018 RR10 https://www.amazon.com/dp/B07DK6J549..._jgz7EbTFEQNDX


Sent from my iPhone using Tapatalk