Go Back   RCCrawler Forums > Scale Rigs Brand Specific Tech > Axial Brand Scale Rock Crawlers > Axial SCX10 II
Loading

Notices

Thread: Hurtz dig on SCX10-II

Reply
 
LinkBack Thread Tools Display Modes
Old 11-15-2020, 01:18 PM   #1
Rock Stacker
 
Join Date: Sep 2017
Location: Germany
Posts: 84
Default Hurtz dig on SCX10-II

I installed VP Hurtz Dig V2 #VPS01350 on my SCX10-II - raw builders kit.

To fit in the dig the motor position had to be switched about 180 degrees.
For this I just turned the skid plate, using the same 4 screws being used before - had some luck! That was much easier the expected!

Problems in dig adjustment got solved:
Adjusting VP hurtz dig V2

Because of my Tamiya Mog body I'm fixed to a short wheelbase of 275 mm.
This meant the rear driveshaft got really short because of the dig.
Good to have Axial's wild boar shafts, that are cut easily and their outer diameter fits underneath the dig's servo.
MIP drive shafts won't, because of their outer diameter.
With the length of the cutted shaft (minimum length 80 mm) I can look for a metal version.
Maybe I get the short SSD shaft #SSD00255 further shortened.
With motor and dig being in behind, I got space for the raw builders batterie tray. Not a beauty but being held with zip ties it got pretty low.
Attached Images
        
ToCrawl is offline   Reply With Quote
Sponsored Links
Old 01-23-2021, 06:34 AM   #2
Rock Stacker
 
Join Date: Sep 2017
Location: Germany
Posts: 84
Default Re: Hurtz dig on SCX10-II

I have cut the short SSD shaft #SSD00255 from original length 88 mm pin-pin with a dremel down to 78 mm. That's possible because SSD cuts their splines on the full length of the female part. So I get the full travel of the 88mm #6308-30 Pro-Spec shocks on this SCX10-kit with a 425 mm wheelbase.

Gesendet von meinem SM-G955F mit Tapatalk
ToCrawl is offline   Reply With Quote
Reply



Hurtz dig on SCX10-II - Similar Threads
Thread Thread Starter Forum Replies Last Post
SCX10.2 with Hurtz dig v2?? Pjking Axial SCX10 II 3 09-25-2018 07:38 PM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 05:47 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com