10-22-2020, 04:39 AM | #1 |
Rock Stacker Join Date: Oct 2019 Location: Lantz, NS
Posts: 68
| dmacs Gladiator
My son and I finally made it in to the LHS after a very long time not being in there, and wouldn’t ya know it, an SCX10 III followed me home. I don’t know how much of a build this will be, but I’ll try and post as much as I can (and remember to). So far I’ve removed the front window tint, changed to metal beadlock rims, printed a Knight Customs snorkel and large Pelican case, and swapped the tx for a DX5C. I have these parts on the way too. Sent from my iPhone using Tapatalk |
Sponsored Links | |
10-22-2020, 04:40 AM | #2 |
Rock Stacker Join Date: Oct 2019 Location: Lantz, NS
Posts: 68
| Re: dmacs Gladiator Sent from my iPhone using Tapatalk |
10-22-2020, 06:47 PM | #3 |
Rock Stacker Join Date: Aug 2020 Location: US
Posts: 83
| Re: dmacs Gladiator
Looks really cool |
10-22-2020, 11:38 PM | #4 |
I wanna be Dave Join Date: Aug 2004 Location: san jose
Posts: 2,061
| Re: dmacs Gladiator
Sweet rig Gun case should be in back seat. |
10-23-2020, 05:13 AM | #5 |
Rock Stacker Join Date: Oct 2019 Location: Lantz, NS
Posts: 68
| Re: dmacs Gladiator |
10-25-2020, 11:41 AM | #6 |
Rock Stacker Join Date: Oct 2019 Location: Lantz, NS
Posts: 68
| Re: dmacs Gladiator
RTT is painted and on. Sent from my iPhone using Tapatalk |
10-27-2020, 01:58 PM | #7 |
Rock Stacker Join Date: Oct 2019 Location: Lantz, NS
Posts: 68
| Re: dmacs Gladiator
Knight Customs front fenders are on. First things I’ve printed with PETG, so not perfect, but I’m still happy with how they turned out. Sent from my iPhone using Tapatalk |
10-27-2020, 03:43 PM | #8 |
Go Buckeyes! Join Date: Jun 2017 Location: Mid-Ohio
Posts: 4,134
| Re: dmacs Gladiator
Good looking Gladiator! Congrats! Nice upgrades so far! Your 3D prints look really good! I bought the 3D print file for the Gladiator, but haven't printed them yet. Glad to see that they print good! I think the front fenders look good. I've only printed in PLA, so I'm not sure how the PETG prints or how they should look, but I think they look great! |
10-27-2020, 11:16 PM | #9 |
I wanna be Dave Join Date: Aug 2004 Location: san jose
Posts: 2,061
| Re: dmacs Gladiator
Do tire rub the new fender flairs? Sweet rig.... |
10-28-2020, 05:07 AM | #10 | |
Rock Stacker Join Date: Oct 2019 Location: Lantz, NS
Posts: 68
| Re: dmacs Gladiator Quote:
You have to change most settings for PETG. The front fenders are the first parts I had printed with it, and this was my fourth attempt at it. The first three had various issues. The rear fenders came out pretty good with the same settings I used for the front, but I think the settings still need some tweaking. I haven't actually checked yet, but there is more clearance than the stock flares. | |
10-28-2020, 04:05 PM | #11 |
Pebble Pounder Join Date: Mar 2015 Location: East coast Canada
Posts: 107
| Re: dmacs Gladiator I printed these fenders for my JLU ( same front fenders anyway ) the tires don't rub on the fenders, but still rub on the fender mounting locations on the body. If you look through the fender the body and fender mount are lower than the fenders themselves with the back brace installed, there isn't a lot of trimming you can do either. I put some 1/4" long tubing on my front shock shafts to limit the up travel on the shocks. |
10-28-2020, 05:05 PM | #12 |
Rock Stacker Join Date: Oct 2019 Location: Lantz, NS
Posts: 68
| Re: dmacs Gladiator
Mail call today. I’m thinking about mounting these lights (without the tube mount part) to the bumper, though I’m not sure if I’ll actually put the lights in them as I don’t think there will be enough room for the wiring. Sent from my iPhone using Tapatalk |
10-28-2020, 05:17 PM | #13 |
Rock Stacker Join Date: Oct 2019 Location: Lantz, NS
Posts: 68
| Re: dmacs Gladiator Sent from my iPhone using Tapatalk |
10-28-2020, 05:45 PM | #14 |
I wanna be Dave Join Date: Aug 2004 Location: san jose
Posts: 2,061
| Re: dmacs Gladiator
Sweet sweet rig. Are those tires 4.75 tall? |
10-29-2020, 05:15 AM | #15 |
Rock Stacker Join Date: Oct 2019 Location: Lantz, NS
Posts: 68
| Re: dmacs Gladiator |
10-29-2020, 06:47 AM | #16 |
Rock Stacker Join Date: Oct 2019 Location: Lantz, NS
Posts: 68
| Re: dmacs Gladiator I noticed last night that my shocks are starting to leak so I'm going to take them off, green slime the o-rings, put some heavier weight oil in them, and now I'll put a little nitro fuel tubing on my shocks when I do this.
|
10-31-2020, 01:39 PM | #17 |
Rock Stacker Join Date: Oct 2019 Location: Lantz, NS
Posts: 68
| Re: dmacs Gladiator
Got it out for a good run, and I’m VERY happy with how it worked! Sent from my iPhone using Tapatalk |
11-06-2020, 11:29 AM | #18 |
Rock Stacker Join Date: Oct 2019 Location: Lantz, NS
Posts: 68
| Re: dmacs Gladiator
Did a bit of Sharpie work on the engine, and some painting on the guys body and his hat. Didn’t turn out too bad, but there are a couple of small runs, but they’re not that noticeable. Also put a Pelican case on the rear seat. Sent from my iPhone using Tapatalk |
11-06-2020, 11:30 AM | #19 |
Rock Stacker Join Date: Oct 2019 Location: Lantz, NS
Posts: 68
| Re: dmacs Gladiator
Oh, I changed out the bumpers too. The bumper lights are controlled with my TX (DX5C). Sent from my iPhone using Tapatalk |
11-09-2020, 07:06 PM | #20 |
Rock Stacker Join Date: Aug 2020 Location: US
Posts: 83
| Re: dmacs Gladiator
That last picture is amazing. Looks so realistic.
|
dmacs Gladiator - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
1:6 Gladiator | muddeprived | Large Scale Rigs | 75 | 07-24-2014 05:00 PM |
Gladiator | BTF | Large Scale Rigs | 3 | 09-07-2012 07:51 AM |
American Gladiator | ColquittCustom405 | Chit Chat | 13 | 01-31-2008 05:42 PM |
Gladiator 2 | klrp | Tires and Wheels | 8 | 06-22-2007 01:45 PM |
Bought a Gladiator | mulchman | Chit Chat | 27 | 03-11-2007 07:08 PM |
| |