Axial SCX10 Gladiator body dimensions needed
 

Hello Gladiator owners,


My 6x6 is in need of a new shell, and the Gladiator seems like a good base. Cant find anyone local that owns one, could someone take some measurements for me ?
https://i57.servimg.com/u/f57/16/41/73/43/gladia10.png
+ the width of the body at the bottom of the doors


Thanks !

Re: Axial SCX10 Gladiator body dimensions needed
 

Measurements are as close as I could get them .


A - 7 5/8" or 193.7 mm back of front flare to front of rear flare
A - 8 3/4" or 222.3 mm inside of flare to inside of flare

B - about 3 1/8" to 3 1/4" or 79.4 mm to 82.6 mm

Width at back of front fender flares - 6 13/16" or 173 mm

Width at front of rear fender flares -7 3/8" or 187.3 mm
Bottom of front rear fender flare to the body line at the rear window which is also top of bed height - 3" or 76.2 mm



Hope this helps some

Re: Axial SCX10 Gladiator body dimensions needed
 

Thank you very much, these measurements are more than enough for me to check if it could work, minor adjustements can be done with scissors :ror: