|
| LinkBack | Thread Tools | Display Modes |
05-30-2011, 03:18 PM | #1 |
Quarry Creeper Join Date: Dec 2010 Location: Franklin, Va
Posts: 456
| so, what brushless system?
I know this was covered somewhere, but thought I'd bring it up again! lol What system would be good for this? I have a sidewinder esc... I'll probaly run it stock for awhile, but always have the upgrade bug nagging lol |
Sponsored Links | |
05-30-2011, 04:38 PM | #2 |
I wanna be Dave Join Date: Dec 2009 Location: .
Posts: 7,967
|
I won a 27t Brood motor at ECC I may try with a sidewinder I have lying around on 3s.
|
05-30-2011, 06:48 PM | #3 |
Pebble Pounder Join Date: May 2011 Location: Fort Bliss
Posts: 177
|
I'll be trying out a MMP with a CC 4600kv motor. I know it won't crawl but it will be interesting to see how it handles the power. Once I get some more funds for R/C i plan on getting a couple of HH motors. I want to try out the Brushless sensored outrunner as well as his puller motor. The brushless is rated at 2000kv and the puller motor is a 10T brushed. I'm hoping one of the two will give a good balance between speed and crawlability. The CC motor will only be for goofing off until it gets into my slash.
|
06-02-2011, 08:41 AM | #4 |
I wanna be Dave Join Date: Dec 2009 Location: .
Posts: 7,967
|
From what I have been reading this will be a popular choice. I think I will go this route because I like to play in water. http://www3.towerhobbies.com/cgi-bin...&I=LXXWM5&P=ML |
06-02-2011, 09:23 AM | #5 |
20K Club Join Date: Jul 2004 Location: Sending illegals home one Hayabusa at a time.
Posts: 22,981
|
I am trying to hunt down a VXL for mine right now. I ran my Wraith for quite awhile last night am was very happy with the stock speed on 3S (however a BEC is a must on 3S). The VXL should be PERFECT though. |
06-02-2011, 02:11 PM | #6 |
RCC Addict Join Date: Oct 2008 Location: Tyler, TX
Posts: 1,619
|
Castle Sidewinder with VXL motor will be my choice. The VXL ESC sucks and has zero drag brake. The startup between the VXL ESC and anything CC is night and day. The motors can be had used for 40-50 and last time I looked rc-tech had a decent selection being sold in the market place. |
06-02-2011, 02:32 PM | #7 |
Scale Detail Engineering Join Date: Apr 2010 Location: Turtle Island
Posts: 5,573
|
I think I paid $75 for my scx10's VXL System! I don't think that's the norm though, there were just no other bidders |
06-03-2011, 07:50 AM | #8 |
20K Club Join Date: Jul 2004 Location: Sending illegals home one Hayabusa at a time.
Posts: 22,981
|
Be very careful when going brushless. They are a blast but easy to blow stuff up! I stripped the transmission out in about 5 mins yesterday with the VXL on 3s. I think I need to stick with 2s packs and add a bunch of beef to the drivetrain.
|
06-03-2011, 07:57 AM | #9 |
I wanna be Dave Join Date: Dec 2009 Location: .
Posts: 7,967
| All metal Robinson Racing Trans gears, and MIP driveshafts. |
06-03-2011, 08:01 AM | #10 |
20K Club Join Date: Jul 2004 Location: Sending illegals home one Hayabusa at a time.
Posts: 22,981
| |
06-03-2011, 08:15 AM | #11 |
I wanna be Dave Join Date: Dec 2009 Location: .
Posts: 7,967
| |
06-03-2011, 10:16 AM | #12 |
20K Club Join Date: Jul 2004 Location: Sending illegals home one Hayabusa at a time.
Posts: 22,981
|
It's all ordered and should be here by Tuesday.
|
06-03-2011, 10:46 AM | #13 |
Rock Crawler Join Date: Jun 2009 Location: Colorado Springs
Posts: 738
|
I have a Mamba Max Pro, CC BEC, and a Tekin 13.5 brushless waiting for mine to get here |
06-05-2011, 11:48 AM | #14 |
Quarry Creeper Join Date: Dec 2010 Location: Franklin, Va
Posts: 456
|
I have a Sidewinder, and a VXL motor. Will the transmission hold up to 2s you think Harley? What pinion are you running?
|
06-05-2011, 12:10 PM | #15 | |
20K Club Join Date: Jul 2004 Location: Sending illegals home one Hayabusa at a time.
Posts: 22,981
| Quote:
I am running 20/84 now. | |
06-05-2011, 09:40 PM | #16 |
Pebble Pounder Join Date: Feb 2011 Location: B.C. , Canada
Posts: 130
|
I got a novak Goat 3s esc with the novak crawler 13.5t laying in a box i wonder how they will do in the wraith
|
06-07-2011, 08:36 PM | #17 |
Pebble Pounder Join Date: May 2011 Location: san jose
Posts: 198
|
i have a hobbywing 2700kv motor and ESC laying around. gear it down for some decent crawling capability. im sure the stock setup is pretty awesome for a brushed setup |
06-11-2011, 07:30 PM | #18 |
Rock Crawler Join Date: Apr 2008 Location: Boise, Idaho
Posts: 954
|
Go big or go home... Tekin Rx8 Truggy, this is the system I just ordered for my KOH jeep: http://www.amainhobbies.com/product_...r-Combo-1350kV Running on 6s.. |
06-11-2011, 08:48 PM | #19 |
I wanna be Dave Join Date: Feb 2004 Location: Columbia Gorge
Posts: 5,512
|
I think a 3s with stock setup is pretty dang fun. For me it's fast enough that you can't turn without it flipping over. This rig isn't a low slung SC type truck... it's a big & bouncy solid axle rig. It's not a cushy ride. At full speed with the 3s powering it, I hit a small rock(~1/2" sized) and it went up on two wheels. The rig has no weight to it. |
06-12-2011, 03:15 PM | #20 |
Rock Crawler Join Date: Jul 2009 Location: greeley
Posts: 545
| |
Thread Tools | |
Display Modes | |
| |