is the wraith completly water proof

[gm0688]

Originally Posted by crazyorigin

Electric motors will run in water but it doesn't mean they are all waterproof. Something sealed and rated as Waterproof is what you will want if you plan do do a lot of water wheeling, especially if you want to hit mud and dirty water. Many brushless. Motors are sealed and would work well, but there are choices that are rated as waterproof.

Plasti dip if it is done right isn't very thick, if you do it when the dip is fresh, and its good and warm, it will end up being very thin, and the stuff is tough as nails. I have most all my lipos dipped, some servos too and it works well. Servos will need additional sealing around the output shaft like an o-ring or grease applied regularly. You can also fill the internals with dielectric grease. Plasti Dip is also available in a spray can, I plan to try that out on my current waterproof project.

Plastic-Dip makes the back of the "Deans" on batterries look cool to!

[gm0688]

Originally Posted by Harley

I did nothing. And the motor is waterproof, I just fried it because I got shit in it.

Drain out the mudpuddles and fill them with clean water. Easy fix.

[Harley]

Originally Posted by gm0688

Drain out the mudpuddles and fill them with clean water. Easy fix.

I'll bring my Britta with me next time.

[RCTRUX]

thats funny

Originally Posted by Harley

I'll bring my Britta with me next time.