Locked Up's Wraith Woohoo! Came in today and I just got a chance to open it. I'll get some batteries for it tomorrow and will try to get some action shots for yall. My intention is to let everyone that shows up at the next CTX scale comp drive this bad boy .... http://www.lockeduprc.net/misc/pictu...s/DSCN9963.JPG http://www.lockeduprc.net/misc/pictu...s/DSCN9965.JPG http://www.lockeduprc.net/misc/pictu...s/DSCN9966.JPG http://www.lockeduprc.net/misc/pictu...s/DSCN9967.JPG |
Some light updates to the Wraith from a few weeks ago that I forgot to post up. I swapped in an FXR so I could run 3S. I only have 3S batteries and didn't want to risk any damage to the AE-2. I now know a lot of people are running their Wraith on 3S but at the time I did this swap I didn't know people were running their AE-2 on 3S with BECs and not roasting them. Anyway ... the FXR and a CC BEC are installed in the rear box. This box will eventually be disguised as a tool box. Up front I used the stock box with a little modification so I could squeeze in a 2200mah #s Lipo. The interior flaps got bent back a hair but that's about it. I just used a strip of plastic for the battery "tray" and it's held in with velcro straps. I'll be adding in some sort of wheel wells to help disguise the battery as well. I toyed around in our front planter then took it to Somerville Dam for some rock action and some high speed running. After a little playing I ended up slamming the suspension by moving the spring collars up to that the suspension has more droop. It takes the high speed stuff much better now. http://www.lockeduprc.net/tech/Wraith/a/DSCN9968.JPG http://www.lockeduprc.net/tech/Wraith/a/DSCN9969.JPG http://www.lockeduprc.net/tech/Wraith/a/DSCN9976.JPG More pics: http://www.lockeduprc.net/tech/Wraith/a/a1.htm On the want list for now are some alloy knuckles, a winch and a front 3 link. Also I'm thinking of some new some new wheels for crawling and keeping these for high speed bashing. "thumbsup" |
Quote:
How easy is it to get at the battery? Why would you want 3 link for the front? |
Quote:
I want to 3 link the front so I can mount the servo in the chassis (more scale points) and have it work properly. I already have a design in mind too ... "thumbsup" |
Re: Locked Up's Wraith AS A JOKE .... I got to test out some prototype axle shafts for "someone" this weekend and in order to make sure I delivered the maximum amount of abuse possible to the shafts .... I present to you a Wraith Monster truck: http://www.lockeduprc.net/misc/pictu...2/IMG_1462.jpg http://www.lockeduprc.net/misc/pictu...2/IMG_1467.jpg Thumbnails Seriously, I beat the snot out of it and had a blast doing it. I do not recommend this setup for anyone using normal parts. AND if you are interested in a set of the wheels .... let me know. |
Re: Locked Up's Wraith haha thats sweet lookin what sizze wheels are those |
Re: Locked Up's Wraith I had the honor to see these prototype wheels this weekend and let me just say "WOW" they are awesome!!! hey Patric what type of hex adapters are you using? |
Re: Locked Up's Wraith Looks like 3.8's with Trenchers. Gotta have some horsepower to push those around the sandbox. You going to handle those, Patrick? |
Re: Locked Up's Wraith http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXZBM6 Custom 3.8's Quote:
Quote:
Not sure. I'm trying to keep the store to "scale" items but these are pretty fun. :lmao: |
Re: Locked Up's Wraith This reminds me of the hood ratz running around in there 4x4 vehicles with 26in rims. Looks kinda funny imo but may very well be fun to drive. |
Re: Locked Up's Wraith Looking good patrick! That thing is MASSIVE!!! :shock: |
Re: Locked Up's Wraith Quote:
Really just fun to play with though, I had all the neighborhood kids wanting to drive it... and their dads too.:ror: |
Re: Locked Up's Wraith Quote:
LOL, pull the trenchers off and put some rubber bands around the wheels, throw them on you H2 scaler and it will look like the locals here in Houston with 30" chrome wheels on their hummers. |
Re: Locked Up's Wraith This is FINALLY going to be updated .... I'm throwing on our new M3 Scale Hex Bolt kit.... Scale Hex Bolts Kit MC Zinc http://www.lockeduprc.net/hardware/m3kit/1.jpg 2.2" Rock Cutter 8L Beadlock wheels http://www.lockeduprc.net/22wheels/rockcutter8l/4.jpg 2.2" Agile beadlock rings http://www.lockeduprc.net/22rings/agile/2.jpg Of course decked out with as much scale hardware as possible. Also putting in ... http://www.lockeduprc.com/VANQUISH-W...IR-_p_145.html http://www.lockeduprc.net/drivetrain/vps05301/1.jpg http://www.lockeduprc.com/FI-Spool-_p_282.html http://www.lockeduprc.net/drivetrain/spool/1.jpg And last but not least .... http://www.lockeduprc.com/Slipper-El...inum_p_88.html <object width="640" height="360"><param name="movie" value="//www.youtube.com/v/vC_u92RSRH4?hl=en_US&version=3"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="//www.youtube.com/v/vC_u92RSRH4?hl=en_US&version=3" type="application/x-shockwave-flash" width="640" height="360" allowscriptaccess="always" allowfullscreen="true"></embed></object> Should have some updated pictures for this weekend! |
Re: Locked Up's Wraith Can't wait to see what else scale items you going to make to throw on your truck."thumbsup" I will be keeping a eye on the store for some great scale parts. |
Re: Locked Up's Wraith A couple of things went in this evening. Wheels, Rings, M2 hardware & Acorns http://www.lockeduprc.net/misc/pictu...3/IMG_1085.jpg Slipper (will go in tomorrow), overdrive, VP shafts, FI spool and M3 hardware. http://www.lockeduprc.net/misc/pictu...3/IMG_1087.jpg Front end almost done (going to "treat" the front diff cover so it will stay off for now). http://www.lockeduprc.net/misc/pictu...3/IMG_1093.jpg With a set of hubs off the H2 (for now) http://www.lockeduprc.net/misc/pictu...3/IMG_1095.jpg A taste of the M3 stuff .... http://www.lockeduprc.net/misc/pictu...3/IMG_1109.jpg Rest of the pics: Thumbnails |
Re: Locked Up's Wraith Did a little mod to the front diff cover so I could get it back on. Here it is before "surgery"... http://www.lockeduprc.net/misc/pictu...3/IMG_1114.JPG I started with an x-acto knife to remove the nubs. http://www.lockeduprc.net/misc/pictu...3/IMG_1115.JPG You will want shave them off as flat as possible.... Next I used a mini drill press to make some 1.6M holes (drill size for M2 tap). http://www.lockeduprc.net/misc/pictu...3/IMG_1116.JPG I also started a tap in there for a few turns but it's probably not necessary. After you drill the holes, clean up any boogers with your x-acto. Here is the cover with some of our Locked Up RC M2x1 Scale hex bolts with the MCZ finish. I think it looks great! While I was at it, I replaced the binder screws for the inner C's and rear lockouts and shaved the top of my front axle truss. Much cleaner I think. http://www.lockeduprc.net/misc/pictu...3/IMG_1117.JPG http://www.lockeduprc.net/misc/pictu...3/IMG_1120.JPG http://www.lockeduprc.net/misc/pictu...3/IMG_1121.JPG http://www.lockeduprc.net/misc/pictu...3/IMG_1122.JPG http://www.lockeduprc.net/misc/pictu...3/IMG_1123.JPG http://www.lockeduprc.net/misc/pictu...3/IMG_1124.JPG |
Re: Locked Up's Wraith I like where this is going...subscribed!!! I will be getting some more acorns & also must have on the scale hardware!!! "thumbsup" |
Subscribed... I'm loving my FI Spools. The centered RC4WD axle shafts fit in it so tight... There is absolutely no play there, and only a little play up front with the VP VVD's. |
Re: Locked Up's Wraith Got some new tires in for the Wraith! Decided I liked the small ones enough that I went ahead and got the big daddy size of the Baja Claws! :lmao: http://www.lockeduprc.net/misc/pictu...3/IMG_0411.jpg More coming on this soon, I promise. ;-) |
All times are GMT -6. The time now is 04:57 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com