RCCrawler Forums

kgraham204 · 09-22-2011, 09:31 PM

My custom wraped wraith

clayton78 · 09-23-2011, 10:16 AM

kinree · 09-23-2011, 07:23 PM

Dinky V2 (Wedge) hood
Carter Fab & Machine panels
Vanquish Ti lower links, drag link, Tie Rod
Vanquish Chubs, Knuckles
JR DS8711
CC Bec
HH TorqueMaster pro 21t
HH BRXL waterproofed
RCP Crawlers Stainless Steel Diff Locker
Mip Steel drive shafts
Turnigy 5000mah 20c 2s
Sky lipo 5000mah 30c 3s

pistol974 · 09-24-2011, 04:01 PM

DiEzel · 09-24-2011, 10:37 PM

Jay-Em · 09-25-2011, 06:32 AM

Here's my Wraith. Seeing a green-metallic wraith on YT, it got me thinking.
I had a cool, utterly-poseable She-Hulk figure lying around, and it clicked.

-RTR Wraith

-Home-made axle-links. I had to replace the stock links, because they went all "noodly". 4mm Thread-stock threaded through 6mm outside diam. Aluminium tubing. All rod-ends are Savage/Revo rod-ends with metal balls. (Aluminium tubes are 9,5cm; rods are 11cm , for those that want to replicate this el-cheapo solution.) Combined with the Revo-rod-ends, they are the right length. I considered stainless steel 4mm rod, but SS is a bitch to work with if one only has a hacksaw, so, I opted for super-cheap steel rod : E1,10 a mtr.

-Home made servo-link.

-Stock servo, receiver and ESC.

-Stock gearing

-fitted 6mm aluminium tubing inside the drive-axles to prevent warping/collapsing. Fits exactly!, and works like a charm.

-Graupner Speed 600 race 7,2 volts. 22500 rpm. A steal @ E12,-

Fan-Cooled, great torque (I left the soft metal flux-ring in place) and reasonable endurance on 4000mAh, say 15min heavy high-speed bashing, and 30 min slow crawling.

-Bionic-Batteries 4000mah, 50c, 200A peak, 30c 120A cont.

-Outside painted. First scuffed with a scotch-brite, then primed with Tamiya light-grey primer. Then sprayed with Tamiya lime-green metallic TS-paint, and finished with 4 layers of cheap 4$$ automotive clear.

Close-up of Shiny body.

Having fun on home-brewn urban-crawling course

Look on self-fabricated aluminium links. Total cost E5,- and a lot of sweat. including Savage rod-ends&balls

Showing how well Shulkie actually fits.

Overview.

Home-made servo-link.

Had to flip the differentials to make the motor run CCW. Rather peculiar.. Even the manual had it correct, but some chinese person didn't understand his/her left from his/her right..

Thnx for looking.
Got a kit on order. That's going to get A LRP 13.5 brushless stock-spec with an LRP AI-Pro ESC.

mat · 09-26-2011, 03:29 AM

All stock apart from the GMade shocks and the self made steering link.

ev0l · 09-26-2011, 02:52 PM

Pretty much stock for now, but got my wrap on there.

rc iceman · 09-27-2011, 11:17 AM

Quote:

Originally Posted by Harley

...

Quote:

Originally Posted by toyofast

The Bulu Productions Wraith....

[QUOTE=kyle_l;3171994]

my k5 blazer idea not too bad

rc iceman · 09-27-2011, 11:28 AM

1milekyle · 09-27-2011, 04:00 PM

gav666 · 10-01-2011, 10:21 PM

R/CMaxximus5.0 · 10-02-2011, 11:26 PM

My Wraith:

JTG671 · 10-04-2011, 02:01 AM

My first body work

Erbing · 10-04-2011, 11:27 AM

A little fun on the rocks.

MNorby · 10-04-2011, 07:54 PM

Still need to do some suspension tuning and wiring, just waiting on rear steer knuckles, etc.

m0d3ds1ash45 · 10-05-2011, 06:32 PM

well heres acouple pics from my kit hope u guys like!

doddfactor · 10-05-2011, 10:41 PM

got alot of ideas for this sucker

Blaine · 10-06-2011, 11:17 PM

Pretty stock
27t motor
20/87 gearing
proline tsl

fsalinas · 10-07-2011, 09:30 AM

From Chile, here's my Wraith

From Chile, my General Lee Wraith.

09-25-2011, 06:32 AM	#86
Jay-Em Rock Crawler Join Date: Jan 2011 Location: Groningen, The Netherlands Posts: 528	My She-Hulk themed Wraith Here's my Wraith. Seeing a green-metallic wraith on YT, it got me thinking. I had a cool, utterly-poseable She-Hulk figure lying around, and it clicked. -RTR Wraith -Home-made axle-links. I had to replace the stock links, because they went all "noodly". 4mm Thread-stock threaded through 6mm outside diam. Aluminium tubing. All rod-ends are Savage/Revo rod-ends with metal balls. (Aluminium tubes are 9,5cm; rods are 11cm , for those that want to replicate this el-cheapo solution.) Combined with the Revo-rod-ends, they are the right length. I considered stainless steel 4mm rod, but SS is a bitch to work with if one only has a hacksaw, so, I opted for super-cheap steel rod : E1,10 a mtr. -Home made servo-link. -Stock servo, receiver and ESC. -Stock gearing -fitted 6mm aluminium tubing inside the drive-axles to prevent warping/collapsing. Fits exactly!, and works like a charm. -Graupner Speed 600 race 7,2 volts. 22500 rpm. A steal @ E12,- Fan-Cooled, great torque (I left the soft metal flux-ring in place) and reasonable endurance on 4000mAh, say 15min heavy high-speed bashing, and 30 min slow crawling. -Bionic-Batteries 4000mah, 50c, 200A peak, 30c 120A cont. -Outside painted. First scuffed with a scotch-brite, then primed with Tamiya light-grey primer. Then sprayed with Tamiya lime-green metallic TS-paint, and finished with 4 layers of cheap 4$$ automotive clear. Close-up of Shiny body. Having fun on home-brewn urban-crawling course Look on self-fabricated aluminium links. Total cost E5,- and a lot of sweat. including Savage rod-ends&balls Showing how well Shulkie actually fits. Overview. Home-made servo-link. Had to flip the differentials to make the motor run CCW. Rather peculiar.. Even the manual had it correct, but some chinese person didn't understand his/her left from his/her right.. Thnx for looking. Got a kit on order. That's going to get A LRP 13.5 brushless stock-spec with an LRP AI-Pro ESC. Last edited by Jay-Em; 09-25-2011 at 09:45 AM. Reason: forgot important detail.

09-27-2011, 11:28 AM	#90
rc iceman Newbie Join Date: Jun 2010 Location: c.f Posts: 7	my blazer mild trimming

10-01-2011, 10:21 PM	#92
gav666 Newbie Join Date: Apr 2008 Location: australia Posts: 21	Last edited by gav666; 10-01-2011 at 10:35 PM. Reason: Add picz

10-02-2011, 11:26 PM	#93
R/CMaxximus5.0 Rock Crawler Join Date: Mar 2008 Location: 920 Valley of the Fox Posts: 768	My Wraith: Last edited by R/CMaxximus5.0; 02-25-2015 at 09:54 PM.

10-05-2011, 10:41 PM	#98
doddfactor Newbie Join Date: Oct 2010 Location: bellflower Posts: 23	doddfactors wraith got alot of ideas for this sucker Attached Images

09-22-2011, 09:31 PM	#81
kgraham204 Rock Stacker Join Date: Feb 2008 Location: winnipeg Posts: 63	My custom wraped wraith

09-23-2011, 10:16 AM	#82
clayton78 Quarry Creeper Join Date: Feb 2008 Location: Bay City Posts: 340

09-23-2011, 07:23 PM	#83
kinree Newbie Join Date: Jun 2011 Location: Steilacoom Posts: 41	Dinky V2 (Wedge) hood Carter Fab & Machine panels Vanquish Ti lower links, drag link, Tie Rod Vanquish Chubs, Knuckles JR DS8711 CC Bec HH TorqueMaster pro 21t HH BRXL waterproofed RCP Crawlers Stainless Steel Diff Locker Mip Steel drive shafts Turnigy 5000mah 20c 2s Sky lipo 5000mah 30c 3s

09-24-2011, 04:01 PM	#84
pistol974 Newbie Join Date: Apr 2007 Location: Columbus Posts: 47

09-24-2011, 10:37 PM	#85
DiEzel RCC Addict Join Date: Oct 2008 Location: Alpine,CA Posts: 1,258

09-26-2011, 03:29 AM	#87
mat Pebble Pounder Join Date: May 2004 Location: South Wales, UK Posts: 195	All stock apart from the GMade shocks and the self made steering link.

09-26-2011, 02:52 PM	#88
ev0l Rock Crawler Join Date: Jan 2010 Location: In the lair editing video Posts: 660	Pretty much stock for now, but got my wrap on there.

09-27-2011, 04:00 PM	#91
1milekyle Newbie Join Date: Oct 2010 Location: Murrieta Posts: 13

10-04-2011, 02:01 AM	#94
JTG671 Newbie Join Date: Aug 2011 Location: Guam Posts: 44	My first body work

10-04-2011, 11:27 AM	#95
Erbing Rock Crawler Join Date: Jun 2011 Location: Las Vegas/671 Posts: 985	A little fun on the rocks.

Sponsored Links

LinkBacks (?) LinkBack to this Thread: http://www.rccrawler.com/forum/axial-wraith/322905-wraith-picture-archive-no-talking.html
Posted By	For	Type	Date
RC CARS / Wraith nice color scheme	This thread	Refback	02-18-2013 03:51 PM
Gallery wraith - Scalers & Crawlers	This thread	Refback	10-07-2011 04:43 AM
AXIAL WRAITH KIT Coming soon - Seite 2 - Fahrzeuge - rockcrawler.de	This thread	Refback	10-05-2011 03:14 AM

Wraith Picture Archive - No talking - Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SCX10 Picture Archive - No talking	BENDER	Axial SCX-10	3332	06-04-2023 05:40 PM
Sportsman Picture Archive	Dostradamas	General Crawlers	10	06-24-2013 12:42 AM
Powersports Picture Archive	MICHIGAN CRAWLER	Chit Chat	35	01-28-2012 04:33 PM
Picture archive	mental	South Carolina	21	08-18-2009 03:33 PM

10-04-2011, 07:54 PM	#96
MNorby Rock Crawler Join Date: Jan 2007 Location: Northern Wyoming Posts: 904	Still need to do some suspension tuning and wiring, just waiting on rear steer knuckles, etc.

10-05-2011, 06:32 PM	#97
m0d3ds1ash45 Rock Stacker Join Date: Apr 2009 Location: sheilock Posts: 89	well heres acouple pics from my kit hope u guys like!

10-06-2011, 11:17 PM	#99
Blaine Pebble Pounder Join Date: Feb 2011 Location: Moses Lake , Wa Posts: 123	Pretty stock 27t motor 20/87 gearing proline tsl

10-07-2011, 09:30 AM	#100
fsalinas Newbie Join Date: Oct 2011 Location: Chile Posts: 1	From Chile, here's my Wraith From Chile, my General Lee Wraith. Last edited by THX_138; 06-24-2012 at 01:00 AM.

RCCrawler Forums

Thread: Wraith Picture Archive - No talking