RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Axial Wraith (http://www.rccrawler.com/forum/axial-wraith/)
-   -   What Powers Your Wraith? (http://www.rccrawler.com/forum/axial-wraith/335619-what-powers-your-wraith.html)

cencal 09-06-2011 06:41 PM

What Powers Your Wraith?
 
Just wanted to get an idea of what everyone is running.

My current setup:

MMP
4s/3s 2200
CC BEC
13.5 Sensored Tekin
Hitec 7950th

Harley 09-06-2011 07:30 PM

Holmes BRXL Waterproof Version
Holmes 13t Crawlmaster Motor
Castle BEC Pro (due to the number of servos)
5250 3s Lipo
Futaba 9157 front
Futaba 9157 rear
Futaba 9157 winch

buzzbuzzard 09-06-2011 08:14 PM

Tekin RX8
Tekin SC4X 4.5T ( 4800kv)
savox 1268
protek 2s 5000 65c
specktrum rx\tx ( switching to futaba)
54\14 32p
36\14 diff

gdb85 09-06-2011 08:30 PM

Holmes BRXL (waterproofed)
13t Crawlmaster
Hitec 7954 front and rear
Castle bec
2200 3s

Hitec 5995 remote winch powered by 850 2s

JohnRobHolmes 09-06-2011 08:34 PM

Mostly stock except:

12t Crawlmaster, Checkpoint edition
2s 5000mah lipo or 2100 3s lipo

I need to swap in a BEC for 3s use or throw in a TorqueMaster speedo, my servo is cutting out on 3s. After that I am swapping in some Futaba servos.

skid 09-06-2011 08:38 PM

Mmp, tekin sc4x 7.5t or pro4 3300kv on 4s. Chasing broken parts now with a smile:lmao:

lagz2point0 09-06-2011 08:47 PM

novak 3s goat
18.5t brushless combo
futaba s9157
traxxas summit tx and rx (to utilize potential rear steering one day, and dig unit on an inexpensive platform)
BEC on esc for 3s setup (novak recomended)

dubAron 09-06-2011 09:00 PM

Holmes BRXL ESC (waterproof)
20T Torque Master Pro
3s Lipo 4200 mah
JR servo for now switching to a Hitec soon.

You can't go wrong with anything Holmes just make sure to do your home work on the different turn motors.

JohnRobHolmes 09-06-2011 09:02 PM

Quote:

Originally Posted by dubAron (Post 3267611)
Holmes BRXL ESC (waterproof)
20T Torque Master Pro
3s Lipo 4200 mah
JR servo for now switching to a Hitec soon.

You can't go wrong with anything Holmes just make sure to do your home work on the different turn motors.

Go by KV, it is easier than turns and helps the transitions between construction styles "thumbsup" Maybe I should do that on the site :lol:


These guys running the Tekin SC motors are nuts :twisted: They need some serious beef under the rig, like Twin force/ Mad Force axles :twisted::twisted:

BOWTIE 09-06-2011 09:04 PM

Holmes BRXL ESC (Waterproof Version)
19T Torque Master
3s Lipo
5955 Hitec servo
CC Bec
80t/14t

omenwolf 09-06-2011 10:17 PM

OG Mamba max waterproofed
Trx titan 21t (till i can get another HH motor probably 20t ish) castle/Neu 1406 4600 4pole for when im feeling frisky
Hitec 7955
ccbec
Turnigy 3000mah 3s 40c

bozo 09-06-2011 10:29 PM

MMP 7700kv
Futaba 9157
Thunder Power 5k mah 2s

Built to Bash

Oso787 09-06-2011 10:55 PM

Sidewinder ESC
16T Holmes Crawlmaster
7955tg servo
CC BEC
3s lipo
80/16

hotwheels000 09-06-2011 10:59 PM

Quote:

Originally Posted by JohnRobHolmes (Post 3267620)


These guys running the Tekin SC motors are nuts :twisted: They need some serious beef under the rig, like Twin force/ Mad Force axles :twisted::twisted:

Tekin 7.5 sc ,mmp....,3 or 4 s


It all your fualt JRH:mrgreen::mrgreen::mrgreen::mrgreen: Thank you"thumbsup"

R/CMaxximus5.0 09-09-2011 01:31 PM

This should be a poll, and prob. a sticky too. Just sayin'"thumbsup"

skid 09-09-2011 01:42 PM

Quote:

Originally Posted by JohnRobHolmes (Post 3267620)
These guys running the Tekin SC motors are nuts :twisted: They need some serious beef under the rig, like Twin force/ Mad Force axles :twisted::twisted:

I played the Twin Force game years ago(05?) when they first came out. Novak HV4400 motor on 14.4 volts kept breaking dogbones. All 4 dogbones now have 2-3 spots where I welded them back together.:lmao:Hmmm, two short sides would be close to Wraith wide.......

Stuntman Jim 09-09-2011 02:57 PM

Holmes BRXL - waterproofed
13t Crawlmaster - smoooth!
Hitec 5955TG
Castle bec (soon to be installed, but really don't need it yet)
3000mAh 3s Turnigy 25-50C
87/18 gears, going to install 87/20 and the speed will be perfect I think.

gm0688 09-09-2011 05:07 PM

Quote:

Originally Posted by cencal (Post 3267323)
Just wanted to get an idea of what everyone is running.

My current setup:

MMP
4s/3s 2200
CC BEC
13.5 Sensored Tekin
Hitec 7950th



sSidewinder SV2
3s batteries
ONSLAUGHT 19T
HITEC 7950

Rook82 09-09-2011 05:29 PM

Quote:

Originally Posted by JohnRobHolmes (Post 3267563)
Mostly stock except:

12t Crawlmaster, Checkpoint edition
2s 5000mah lipo or 2100 3s lipo

I need to swap in a BEC for 3s use or throw in a TorqueMaster speedo, my servo is cutting out on 3s. After that I am swapping in some Futaba servos.


More then half of the people in here have said BRXL and you don't even have one of your own in yet:lmao:. The horror:mrgreen:

Harley 09-09-2011 05:36 PM

Quote:

Originally Posted by Rook82 (Post 3271941)
More then half of the people in here have said BRXL and you don't even have one of your own in yet:lmao:. The horror:mrgreen:

It's because he sold them all to us! :ror:


All times are GMT -6. The time now is 03:47 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com