RCCrawler Forums

jeepinkid83 · 10-03-2011, 10:39 PM

Plans are for a Ultra 4 style rig on AX axles with 2.2's maybe 1.9's and a fairly short wheelbase. Stock electronics for now on 3S.

Got this chassis off of here in stock form. Already have another and wanted to change the chassis up just a little bit. I know some have been cutting the top of the rear cage and bringing it down. I think that looks good but it looks too long IMO. So I sat down and started hacking. This is all simple bolt together and no gluing.

The first cut hurt the most.

Then things got a little tricky, but with a little thinking I got it down.

Let me know what you think. I will update the thread when I get a little further along.

TURTLE · 10-03-2011, 10:59 PM

Cool. The more I see these custom Wraith Chassis' the more I want to keep mine.

ROLANDROCKSHOP · 10-04-2011, 06:42 AM

looking good!

i love seeing people use theyr noodle!

sally1800 · 10-04-2011, 08:35 AM

Nice job.

This is about the only worthy wraith build thread in this sec.

jeepinkid83 · 10-04-2011, 09:12 AM

Quote:

Originally Posted by saydee1800

Nice job.

This is about the only worthy wraith build thread in this sec.

Thanks for the kind words, but now that puts the pressure on to make it worthy.
I've been staring at this thing and I think I may shorten up the front end as well.
It looks a little disproportional with the rear so short now. Should be fairly easy to do though.

Rootar · 10-04-2011, 11:18 AM

yea lose the front bumper like we talked about and put it at a 12.5" WB with the 1.9s and itll look sweet.

crazee horse · 10-04-2011, 12:30 PM

Quote:

Originally Posted by saydee1800

Nice job.

This is about the only worthy wraith build thread in this sec.

it is a very nice job, but i do not agree with the above statement...................

jeepinkid83 · 10-04-2011, 06:09 PM

Got some more done on this thing tonight. Like I said earlier the front looked too long after the rear was done, so I got to work on that. Took out just under a 1/2" off of the bumper supports. It butted the stinger up to the grill and made a pretty good difference.

This is a stock one:

If this was going to be an ULTRA 4 something was missing in this area.

So I took the excess from the top when I cut it down and made some spreaders.

I also took the roof and flipped it 180*. I think it looks good because it follows the rear down bars pretty well. Here is an overall shot of how it sits now.

jeepinkid83 · 10-04-2011, 09:45 PM

Well I got even more done. Moved ESC to the rear of the chassis, the on off switch to the battery plug hole and started on some side panels. This thing is so frickin fun to work on i'm afraid i'll be sad when it's actually time to run it.

Jrgunn5150 · 10-04-2011, 10:18 PM

I'm just curious here, but why would you want a shorter WB?

I'm new lol.

jeepinkid83 · 10-05-2011, 07:22 AM

Quote:

Originally Posted by Jrgunn5150

I'm just curious here, but why would you want a shorter WB?

I'm new lol.

In this case the stock wheelbase wouldn't look right. But there are many reason to shorten a wheelbase.

Zander1422 · 10-05-2011, 12:58 PM

Is almost got the look of a Polaris rzr sweet build

Roll Tide Roll

jeepinkid83 · 10-05-2011, 08:22 PM

Got some more done tonight, got side panels made and mounted and window nets cut and installed. I think it's turning out pretty good.

I also had an idea for making dimple die'd panels. Every body that has an axial has the parts to do it. Just a counter sunk screw, the green counter sunk spacer that axial makes and a backing nut. It works like a charm.

Tuffguy · 10-05-2011, 08:51 PM

I like, makes my stock Wraithage look weak! Need to get all the locals together soon!

derwood21 · 10-05-2011, 08:52 PM

Great idea

Been trying to think of a simple way to dimple die on a small scale. And way to be creative and change it up. Lookin good

jeepinkid83 · 10-05-2011, 09:07 PM

Quote:

Originally Posted by Tuffguy

I like, makes my stock Wraithage look weak! Need to get all the locals together soon!

I'm down for that. Maybe when everybody is out at the park working on the new spot.

frdtrkguy · 10-05-2011, 09:26 PM

Quote:

Originally Posted by jeepinkid83

I also had an idea for making dimple die'd panels. Every body that has an axial has the parts to do it. Just a counter sunk screw, the green counter sunk spacer that axial makes and a backing nut. It works like a charm.

Good idea.

Jrgunn5150 · 10-05-2011, 09:53 PM

Quote:

Originally Posted by jeepinkid83

In this case the stock wheelbase wouldn't look right. But there are many reason to shorten a wheelbase.

Ah I see.

jeepinkid83 · 10-07-2011, 06:32 PM

Mocked up the wheels and tires off of my Wraith, also took the 1.9's off of my other AX/Wraith and they just don't look right on this for some reason, did'nt think to take a pic though.

jeepinkid83 · 10-12-2011, 08:09 AM

Finally got this thing up and running. The Wraith wheels rubbed on the steering link so for now I threw some Creeper wheels on it. Panels are primed and ready for paint. I left a clue in one of the pictures as to paint scheme. If you can guess it you will win absolutely nothing.

Didn't like my down bars as they didn't look scale so I switched them out for some music wire.

Next up is getting the panels painted and installed and the wiring buttoned up.

10-03-2011, 10:39 PM	#1
jeepinkid83 Quarry Creeper Join Date: Mar 2008 Location: Hot Springs Posts: 301	My Ultra 4 style AX/Wraith Plans are for a Ultra 4 style rig on AX axles with 2.2's maybe 1.9's and a fairly short wheelbase. Stock electronics for now on 3S. Got this chassis off of here in stock form. Already have another and wanted to change the chassis up just a little bit. I know some have been cutting the top of the rear cage and bringing it down. I think that looks good but it looks too long IMO. So I sat down and started hacking. This is all simple bolt together and no gluing. The first cut hurt the most. Then things got a little tricky, but with a little thinking I got it down. Let me know what you think. I will update the thread when I get a little further along.

10-05-2011, 08:22 PM	#13
jeepinkid83 Quarry Creeper Join Date: Mar 2008 Location: Hot Springs Posts: 301	Got some more done tonight, got side panels made and mounted and window nets cut and installed. I think it's turning out pretty good. I also had an idea for making dimple die'd panels. Every body that has an axial has the parts to do it. Just a counter sunk screw, the green counter sunk spacer that axial makes and a backing nut. It works like a charm. Last edited by jeepinkid83; 10-05-2011 at 09:41 PM.

10-07-2011, 06:32 PM	#19
jeepinkid83 Quarry Creeper Join Date: Mar 2008 Location: Hot Springs Posts: 301	Mocked up the wheels and tires off of my Wraith, also took the 1.9's off of my other AX/Wraith and they just don't look right on this for some reason, did'nt think to take a pic though. Last edited by jeepinkid83; 10-07-2011 at 06:39 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-03-2011, 10:59 PM	#2
TURTLE Gettin’ back on the horse Join Date: Feb 2006 Location: Hoonsville Posts: 6,671	Cool. The more I see these custom Wraith Chassis' the more I want to keep mine.

10-04-2011, 06:42 AM	#3
ROLANDROCKSHOP I wanna be Dave Join Date: Mar 2007 Location: roland,ar Posts: 5,981	looking good! i love seeing people use theyr noodle!

10-04-2011, 08:35 AM	#4
sally1800 I wanna be Dave Join Date: Dec 2008 Location: ? Posts: 5,055	Nice job. This is about the only worthy wraith build thread in this sec.

10-04-2011, 11:18 AM	#6
Rootar Rock Crawler Join Date: Sep 2010 Location: Little Rock, AR Posts: 596	yea lose the front bumper like we talked about and put it at a 12.5" WB with the 1.9s and itll look sweet.

10-04-2011, 06:09 PM	#8
jeepinkid83 Quarry Creeper Join Date: Mar 2008 Location: Hot Springs Posts: 301	Got some more done on this thing tonight. Like I said earlier the front looked too long after the rear was done, so I got to work on that. Took out just under a 1/2" off of the bumper supports. It butted the stinger up to the grill and made a pretty good difference. This is a stock one: If this was going to be an ULTRA 4 something was missing in this area. So I took the excess from the top when I cut it down and made some spreaders. I also took the roof and flipped it 180*. I think it looks good because it follows the rear down bars pretty well. Here is an overall shot of how it sits now.

10-04-2011, 09:45 PM	#9
jeepinkid83 Quarry Creeper Join Date: Mar 2008 Location: Hot Springs Posts: 301	Well I got even more done. Moved ESC to the rear of the chassis, the on off switch to the battery plug hole and started on some side panels. This thing is so frickin fun to work on i'm afraid i'll be sad when it's actually time to run it.

10-04-2011, 10:18 PM	#10
Jrgunn5150 Quarry Creeper Join Date: Feb 2006 Location: Muskegon Posts: 223	I'm just curious here, but why would you want a shorter WB? I'm new lol.

10-05-2011, 12:58 PM	#12
Zander1422 Pebble Pounder Join Date: May 2011 Location: Decatur Posts: 120	Is almost got the look of a Polaris rzr sweet build Roll Tide Roll

10-05-2011, 08:51 PM	#14
Tuffguy Gold Star Baby Momma! Join Date: Feb 2004 Location: Maumelle, Ar Posts: 713	I like, makes my stock Wraithage look weak! Need to get all the locals together soon!

10-05-2011, 08:52 PM	#15
derwood21 Quarry Creeper Join Date: Aug 2007 Location: Rocklin, CA Posts: 476	Great idea Been trying to think of a simple way to dimple die on a small scale. And way to be creative and change it up. Lookin good

Sponsored Links

10-12-2011, 08:09 AM	#20
jeepinkid83 Quarry Creeper Join Date: Mar 2008 Location: Hot Springs Posts: 301	Finally got this thing up and running. The Wraith wheels rubbed on the steering link so for now I threw some Creeper wheels on it. Panels are primed and ready for paint. I left a clue in one of the pictures as to paint scheme. If you can guess it you will win absolutely nothing. Didn't like my down bars as they didn't look scale so I switched them out for some music wire. Next up is getting the panels painted and installed and the wiring buttoned up.

RCCrawler Forums

Thread: My Ultra 4 style AX/Wraith