Any Wraith crawlers with MIP shafts Which Spur gear?

[toy4crawlin]

So I went to put on my new Kimbrough Spur gear and it hits the big MIP drive shaft
I want a 32 pitch
what are the options?

A. Yotachump chromoly output so that the universal is away from spur gear
B. larger slot for motor Space.
C. ?

[Cableman]

This one fits my ax10 mip's TowerHobbies.com | DTXC9397 DuraTrax Spur Gear 32P 56T Nitro Evader BX

[BurnLatex]

Thats the one I use. There is a tiny bit more room for a larger spur but I am happy with 56T.

I had to clearance the spur cover a tiny bit for the driveshaft. No biggie.

[toy4crawlin]

Isn't 56 for speed runs?

for a crawl ratio, you would need a 60-66t 32 pitch.

looking for the spur to crawl and fit on the traxxas slipper

thanks for your time

[slickwillie]

Is yours 60t? That's what I run & had the same problem. Try flipping it around & it should fit just right

[toy4crawlin]

thanks yea, looking at pic I noticed that. Great idea.
once I get the traxxas slipper in there I guess I will run to lhs and see what will fit.

[Harley]

Originally Posted by slickwillie

Is yours 60t? That's what I run & had the same problem. Try flipping it around & it should fit just right

That.

60t kimbrough fits fine with those shafts.

[crawler nut]

I have a 62/10 set up with MIP shafts. I have a 45th motor. I love my ratio, but I use it for crawling only. If you grind the motor plate a tiny bit you can fit a 66t spur.

[meatmonkey]

Running a 54 tooth 32 pitch spur for a Nitro TC3, it's an associated part, but made by kimbrough. Direct fit to the Axial slipper, and fits underneath the gear cover and clears the MIPs by plenty.

Using a Robinson 12 or 13 pinion with a 5mm bore.

[Cableman]

Originally Posted by toy4crawlin

Isn't 56 for speed runs?

for a crawl ratio, you would need a 60-66t 32 pitch.

looking for the spur to crawl and fit on the traxxas slipper

thanks for your time

I crawl pretty dam awsome with 56/14 and 13.5t brushless motor. Its the same as 60/15. But i guess you could get a better crawl ratio with the 60T spur.

[squish72]

Originally Posted by slickwillie

Is yours 60t? That's what I run & had the same problem. Try flipping it around & it should fit just right

had 60t installed backwards on mine didnt last long now i know better

[toy4crawlin]

Originally Posted by squish72

had 60t installed backwards on mine didnt last long now i know better

why? what is running with fliping a spur gear around

details people

[Postclanker]

Originally Posted by Cableman

I crawl pretty dam awsome with 56/14 and 13.5t brushless motor. Its the same as 60/15. But i guess you could get a better crawl ratio with the 60T spur.

X2 with the 56/14... Crawls surprisingly well....3s is fast enough for me
Best of both worlds....only draw-back...noisy as hell...but I'm used to 64 pitch on road...quite a bit of difference

[squish72]

The teeth are offset to one side one side will sit closer to the trans