RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Axial Wraith (http://www.rccrawler.com/forum/axial-wraith/)
-   -   Kyle's Unemployment Wraith (http://www.rccrawler.com/forum/axial-wraith/358936-kyles-unemployment-wraith.html)

1daywraps.com 01-10-2012 10:40 PM

Re: Kyle's Unemployment Wraith
 
i just got my wraith and like you, ordered damn near every part i could for it...which part is it that broke on you from rcwd?

oh,and the ax10 trans case...what is needed to make that work with the wraith? i don't even see it on vanquish's site anymore...can you link me to it?

also, i am brand new to the wraith gig, the rear lockouts, what do they do?

thanks guys!
"thumbsup"

bagged86 01-12-2012 07:51 PM

Re: Kyle's Unemployment Wraith
 
http://i1057.photobucket.com/albums/...d/b9a65487.jpg
Forgot to get a shot of him in the truck

bagged86 01-12-2012 07:52 PM

Re: Kyle's Unemployment Wraith
 
http://i1057.photobucket.com/albums/...d/fb93a42d.jpg

bagged86 01-12-2012 07:53 PM

Re: Kyle's Unemployment Wraith
 
http://i1057.photobucket.com/albums/...d/ee756648.jpg

bagged86 01-12-2012 07:54 PM

Re: Kyle's Unemployment Wraith
 
http://i1057.photobucket.com/albums/...d/d706f39e.jpg
Electronics box I'll probably make it look like a wood box

bagged86 01-12-2012 07:55 PM

Re: Kyle's Unemployment Wraith
 
http://i1057.photobucket.com/albums/...d/c9bd91f3.jpg

bagged86 01-12-2012 07:56 PM

Re: Kyle's Unemployment Wraith
 
What I said in the last pic post lol

701 Technique 01-12-2012 11:14 PM

Re: Kyle's Unemployment Wraith
 
What electronic box is that?

bagged86 01-13-2012 03:50 PM

Re: Kyle's Unemployment Wraith
 
Quote:

Originally Posted by 701 Technique (Post 3502824)
What electronic box is that?

Radio Shack 4x2x1 electronics boxs for like 4 bucks

bagged86 02-12-2012 12:54 PM

Re: Kyle's Unemployment Wraith
 
http://i1057.photobucket.com/albums/.../wraith003.jpg
http://i1057.photobucket.com/albums/.../wraith002.jpg
got the Ruby Body in and its been a slow paint job since I finally got a job lol

bagged86 02-12-2012 01:00 PM

Re: Kyle's Unemployment Wraith
 
http://i1057.photobucket.com/albums/.../wraith001.jpg
Got some goodies but have admit that Ive had the servo for a week first ride out wasn't good. The only two pressed gears in the case slipped and won't hold. I called Hitec and let me say there customer service is top notch they are sending me a new gear I hope the second set holds if not I'm gonna get the 7950 titanium servo.

As far as a word back from RC4WD they still havnt answered my emails since the told me in January to send in my axles and they would replace them. They are ing the works of a revised set so I hope they keep there word and send me a new set.

rmiranda134 02-12-2012 01:24 PM

Re: Kyle's Unemployment Wraith
 
i have a question about your shocks. first is what kind? and next with my stock ones the rubber gromet that goes in the upper part of it is loose . what can i do use or buy to fix it? or do i just purchase new shocks?

bagged86 02-12-2012 01:42 PM

Re: Kyle's Unemployment Wraith
 
There the Pro-line scale shocks 90-95mm but I think the ones that everyone buys are the Pro-line slash front shocks for the front and rears on the wraith. I like mine quite a bit. I would personally replace them with the proline ones there getting cheaper to buy everyday it seems.

Hoyta 02-12-2012 02:01 PM

Re: Kyle's Unemployment Wraith
 
Why is it called the umemployment wraith?

bagged86 02-12-2012 04:13 PM

Re: Kyle's Unemployment Wraith
 
Because when I was on unemployment I built it. Just now got another job.

rmiranda134 02-12-2012 04:23 PM

Re: Kyle's Unemployment Wraith
 
Cool Thank you

theiceman72 02-12-2012 05:45 PM

Re: Kyle's Unemployment Wraith
 
Where did you get those killer seat belts?

bagged86 02-12-2012 07:59 PM

Re: Kyle's Unemployment Wraith
 
Quote:

Originally Posted by theiceman72 (Post 3564279)
Where did you get those killer seat belts?

I made them out of 1/4 ribbon and some square jewelry pieces and shoe goop all from Hobby Lobby

theiceman72 02-12-2012 10:24 PM

Re: Kyle's Unemployment Wraith
 
Quote:

Originally Posted by bagged86 (Post 3564630)
I made them out of 1/4 ribbon and some square jewelry pieces and shoe goop all from Hobby Lobby

those are HOT you should sell them. I would love a red pair. :shock:

Maddog Madigan 02-12-2012 10:43 PM

Quote:

Originally Posted by bagged86 (Post 3563675)
http://i1057.photobucket.com/albums/.../wraith001.jpg
Got some goodies but have admit that Ive had the servo for a week first ride out wasn't good. The only two pressed gears in the case slipped and won't hold. I called Hitec and let me say there customer service is top notch they are sending me a new gear I hope the second set holds if not I'm gonna get the 7950 titanium servo.

As far as a word back from RC4WD they still havnt answered my emails since the told me in January to send in my axles and they would replace them. They are ing the works of a revised set so I hope they keep there word and send me a new set.

Ask for Mike, I had punisher shafts issues and I sent mine in and received new ones six days later. I know it's frustrating but rc4wd does do right for their customers. It's just scale build time, until we all can get out and have some fun. :)


All times are GMT -6. The time now is 10:41 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com