Re: Kyle's Unemployment Wraith
 

what size are your SLW rims?

Re: Kyle's Unemployment Wraith
 

Thanks for the props man
tower hobbies has them there dubro small nylon hinges cat# 119
That's not a TCS box it's a RadioShack 2x3 electronics box with scale diamond plate cover I bent and made. Very easy to do I must say. It has my MMP in it and the stock axial radio box has the lighting,receiver, and BEC in it tight fit everything has been sealed with RTV.

Re: Kyle's Unemployment Wraith
 

I bought the CKRC mount but of course it didn't work with my setup so I bought a sheet of .030 Lexan and made another mount and painted it black. If you want to just buy the ckrc mount and trace the front and make your own. As far as the extending the bumper out I used aluminum rod and cut them 1/2" long and drilled the center out the use longer bolts. I will buy another body later and do a crazy paint job lol. Hope this helps

Re: Kyle's Unemployment Wraith
 

2.2 1" wide with 475 hubs

Re: Kyle's Unemployment Wraith
 

Cool I'll look into that, tracing out the CKRC mount and make it out a a sheet of aluminum."thumbsup"

Re: Kyle's Unemployment Wraith
 

that'll work the lexan is pretty strong though.
I wish I had the time to make a bumper with a winch mount,lights and the extentions needed with the cms kit out of tubing.

Re: Kyle's Unemployment Wraith
 

http://i1057.photobucket.com/albums/...d/f923fa57.jpg
made my plates to set the cooler up where i wanted to and made a rag top probably changed to gray though

Re: Kyle's Unemployment Wraith
 

Re: Kyle's Unemployment Wraith
 

Beautiful and badass at the same time bro, love it. Thanks for the info!

LIK

Re: Kyle's Unemployment Wraith
 

are those tires better than the stockers because i want to find a good tire

Re: Kyle's Unemployment Wraith
 

Awesome thanks man.

Re: Kyle's Unemployment Wraith
 

Kyle what hardware are you using for the Hinges, I have a set of hinges coming in but it did not come with the hardware. I also like the HighLift Jack I just ordered one yesterday also 1/10 scale."thumbsup"

Re: Kyle's Unemployment Wraith
 

I wouldn't know about the stock tires I built this bolt by bolt
But I will say after I cut these they really started working amazingly.

Re: Kyle's Unemployment Wraith
 

2mm buttons screws with nylon locknuts I got them from the stock 1/18 losi pro chassis after getting my mini juice chassis. they seem to be the right size.

Re: Kyle's Unemployment Wraith
 

Muddy water placement is key on the jack I almost broke mine in half last time out lol

Re: Kyle's Unemployment Wraith
 

bagged86,
Thanks for the info and the tip on the Highlift Jack. I'm searching on the 2mm button screws with lock nuts."thumbsup"

Re: Kyle's Unemployment Wraith
 

Awesome Wraith Kyle!!

I have a couple of questions.

Who makes the output shafts your using on your transmission?

Where did you get the scale diamond sheet you used to cover your radio box?

Thanks

Re: Kyle's Unemployment Wraith
 

Thanks man

Crawler innovations makes them very tough to tear them up highly recommended

I got the scale diamond plate from CKRC it comes with two 9x11 sheets you can cut it with scissors like paper very easy to work with.

Re: Kyle's Unemployment Wraith
 

Well a trip to two Best Buys and thinking I would get just the GoPro hero and left with the more expensive GoPro Hero 2 and then headed to Sports Authority to pick up the BacPac LCD screen. RadioShack because we were at the mall and got mini HDMI cable to watch it on the big screen. Now where did I leave my 400 dollars oh yeah at the service counter along with the frown on my wife giving me the look LOL

Re: Kyle's Unemployment Wraith
 

We are GoPro for launch
http://i1057.photobucket.com/albums/...d/7efe5b84.jpg

http://i1057.photobucket.com/albums/...d/1365da99.jpg