02-28-2012, 08:49 AM | #101 |
Pebble Pounder Join Date: Mar 2010 Location: Minden, Nevada
Posts: 130
| Re: Kyle's Unemployment Wraith
what size are your SLW rims?
|
Sponsored Links | |
02-28-2012, 09:33 AM | #102 | |
Rock Crawler Join Date: Oct 2011 Location: Lake Worth
Posts: 748
| Re: Kyle's Unemployment Wraith Quote:
tower hobbies has them there dubro small nylon hinges cat# 119 That's not a TCS box it's a RadioShack 2x3 electronics box with scale diamond plate cover I bent and made. Very easy to do I must say. It has my MMP in it and the stock axial radio box has the lighting,receiver, and BEC in it tight fit everything has been sealed with RTV. | |
02-28-2012, 09:42 AM | #103 |
Rock Crawler Join Date: Oct 2011 Location: Lake Worth
Posts: 748
| Re: Kyle's Unemployment Wraith I bought the CKRC mount but of course it didn't work with my setup so I bought a sheet of .030 Lexan and made another mount and painted it black. If you want to just buy the ckrc mount and trace the front and make your own. As far as the extending the bumper out I used aluminum rod and cut them 1/2" long and drilled the center out the use longer bolts. I will buy another body later and do a crazy paint job lol. Hope this helps
|
02-28-2012, 09:44 AM | #104 |
Rock Crawler Join Date: Oct 2011 Location: Lake Worth
Posts: 748
| Re: Kyle's Unemployment Wraith |
02-28-2012, 10:47 AM | #105 |
RCC Addict Join Date: Sep 2011 Location: Peoria, AZ
Posts: 1,168
| Re: Kyle's Unemployment Wraith
Cool I'll look into that, tracing out the CKRC mount and make it out a a sheet of aluminum. |
02-28-2012, 01:42 PM | #106 | |
Rock Crawler Join Date: Oct 2011 Location: Lake Worth
Posts: 748
| Re: Kyle's Unemployment Wraith Quote:
I wish I had the time to make a bumper with a winch mount,lights and the extentions needed with the cms kit out of tubing. | |
02-28-2012, 01:45 PM | #107 |
Rock Crawler Join Date: Oct 2011 Location: Lake Worth
Posts: 748
| Re: Kyle's Unemployment Wraith made my plates to set the cooler up where i wanted to and made a rag top probably changed to gray though |
02-28-2012, 01:45 PM | #108 |
Rock Crawler Join Date: Oct 2011 Location: Lake Worth
Posts: 748
| Re: Kyle's Unemployment Wraith |
02-28-2012, 04:18 PM | #109 |
Rock Crawler Join Date: May 2011 Location: Cali/Korea
Posts: 815
| Re: Kyle's Unemployment Wraith
Beautiful and badass at the same time bro, love it. Thanks for the info! LIK |
02-28-2012, 05:08 PM | #110 |
Rock Stacker Join Date: Feb 2012 Location: Cororan
Posts: 50
| Re: Kyle's Unemployment Wraith
are those tires better than the stockers because i want to find a good tire
|
02-28-2012, 05:58 PM | #111 |
Pebble Pounder Join Date: Mar 2010 Location: Minden, Nevada
Posts: 130
| Re: Kyle's Unemployment Wraith |
02-28-2012, 06:09 PM | #112 |
RCC Addict Join Date: Sep 2011 Location: Peoria, AZ
Posts: 1,168
| Re: Kyle's Unemployment Wraith
Kyle what hardware are you using for the Hinges, I have a set of hinges coming in but it did not come with the hardware. I also like the HighLift Jack I just ordered one yesterday also 1/10 scale. |
02-28-2012, 07:18 PM | #113 |
Rock Crawler Join Date: Oct 2011 Location: Lake Worth
Posts: 748
| Re: Kyle's Unemployment Wraith |
02-28-2012, 07:21 PM | #114 |
Rock Crawler Join Date: Oct 2011 Location: Lake Worth
Posts: 748
| Re: Kyle's Unemployment Wraith 2mm buttons screws with nylon locknuts I got them from the stock 1/18 losi pro chassis after getting my mini juice chassis. they seem to be the right size.
|
02-28-2012, 07:23 PM | #115 |
Rock Crawler Join Date: Oct 2011 Location: Lake Worth
Posts: 748
| Re: Kyle's Unemployment Wraith
Muddy water placement is key on the jack I almost broke mine in half last time out lol
|
02-29-2012, 09:02 PM | #116 |
RCC Addict Join Date: Sep 2011 Location: Peoria, AZ
Posts: 1,168
| Re: Kyle's Unemployment Wraith
bagged86, Thanks for the info and the tip on the Highlift Jack. I'm searching on the 2mm button screws with lock nuts. |
03-02-2012, 09:06 PM | #117 |
Newbie Join Date: Jan 2012 Location: sacramento
Posts: 27
| Re: Kyle's Unemployment Wraith
Awesome Wraith Kyle!! I have a couple of questions. Who makes the output shafts your using on your transmission? Where did you get the scale diamond sheet you used to cover your radio box? Thanks |
03-03-2012, 07:03 PM | #118 | |
Rock Crawler Join Date: Oct 2011 Location: Lake Worth
Posts: 748
| Re: Kyle's Unemployment Wraith Quote:
Crawler innovations makes them very tough to tear them up highly recommended I got the scale diamond plate from CKRC it comes with two 9x11 sheets you can cut it with scissors like paper very easy to work with. | |
03-03-2012, 07:09 PM | #119 |
Rock Crawler Join Date: Oct 2011 Location: Lake Worth
Posts: 748
| Re: Kyle's Unemployment Wraith
Well a trip to two Best Buys and thinking I would get just the GoPro hero and left with the more expensive GoPro Hero 2 and then headed to Sports Authority to pick up the BacPac LCD screen. RadioShack because we were at the mall and got mini HDMI cable to watch it on the big screen. Now where did I leave my 400 dollars oh yeah at the service counter along with the frown on my wife giving me the look LOL
|
03-04-2012, 09:22 AM | #120 |
Rock Crawler Join Date: Oct 2011 Location: Lake Worth
Posts: 748
| Re: Kyle's Unemployment Wraith
We are GoPro for launch |
Kyle's Unemployment Wraith - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Kyle's LN/CC | bluice | Team Losi Comp Crawler | 52 | 06-08-2011 12:23 PM |
kyle's plan old jeep | herman712 | 2.2 Scale Rigs | 3 | 01-21-2011 08:03 AM |
Who's enjoying Unemployment? | stubs179 | Chit Chat | 35 | 02-16-2010 02:57 PM |
Thread Tools | |
Display Modes | |
| |