|
| LinkBack | Thread Tools | Display Modes |
01-07-2012, 12:17 AM | #1 |
Rock Stacker Join Date: Nov 2011 Location: Arkansas
Posts: 79
| "Eleanor" Wraith Build up
Just traded my SCX10 honcho for this Wraith.. I don't have to many things in mind for her yet other than just building it up and doing some rock crawling. Here are some poster photos of her and I'm going riding tomorrow so hoping to get some action shots. Specs: vanquish links, steering strc hubs and knuckles integy 45t motor(temporary) RR steel gears in tranny proline titus wheels with 8oz in each one 87/16 geared Proline Titus 2.2 beadlocks Super Swamper TSL with Sedona foams Losi Springs F/R Stock servo(temporary) Last edited by jacobfreeman; 01-11-2012 at 06:59 PM. |
Sponsored Links | |
01-07-2012, 06:47 AM | #2 |
I wanna be Dave Join Date: Mar 2007 Location: roland,ar
Posts: 5,981
| Re: "Eleanor" Wraith Build up
nice one! looks like you got it with all the right parts. |
01-07-2012, 08:11 AM | #3 |
Quarry Creeper Join Date: Dec 2011 Location: SW Arkansas
Posts: 177
| Re: "Eleanor" Wraith Build up
Great looking rig.
|
01-07-2012, 04:54 PM | #4 |
Rock Stacker Join Date: Nov 2011 Location: Arkansas
Posts: 79
| Re: "Eleanor" Wraith Build up
Took the wraith out for some play today: |
01-08-2012, 08:18 AM | #5 |
I wanna be Dave Join Date: Mar 2007 Location: roland,ar
Posts: 5,981
| Re: "Eleanor" Wraith Build up
your rig did real well out there.. i did notice you got ALOT of torque twist in the rear when i was watching the videos i took. slightly stiffer springs in the rear will help it out some. |
01-08-2012, 10:40 AM | #6 |
Newbie Join Date: Aug 2011 Location: Hot Springs
Posts: 7
| Re: "Eleanor" Wraith Build up
when will we get to see the "videos" that you speak of? |
01-09-2012, 07:29 AM | #7 |
I wanna be Dave Join Date: Mar 2007 Location: roland,ar
Posts: 5,981
| Re: "Eleanor" Wraith Build up
im home today so videos will be up later on... patience isnt your one of your strong points is it jared..?? |
01-09-2012, 07:43 AM | #8 |
Quarry Creeper Join Date: Mar 2008 Location: Hot Springs
Posts: 301
| Re: "Eleanor" Wraith Build up |
01-09-2012, 11:35 AM | #9 |
Rock Crawler Join Date: Nov 2009 Location: poteau
Posts: 996
| Re: "Eleanor" Wraith Build up
Specs: vanquish links, steering strc hubs and knuckles integy 45t motor(temporary) RR steel gears in tranny proline titus wheels with 8oz in each one 80/16 geared Proline Titus 2.2 beadlocks Super Swamper TSL with Sedona foams Losi Springs Stock servo(temporary unless you swapped the spur it's an 87t spur. also has mip driveshafts as for the torque twist it's running losi comp shocks with losi white springs in front, axial super soft red springs in rear. i don't remember if i told you or not, but i swapped the ring gears around in the axles so the motor turns the normal direction now. i bet you figured that out tho!! |
01-11-2012, 06:53 PM | #10 |
Rock Stacker Join Date: Nov 2011 Location: Arkansas
Posts: 79
| Re: "Eleanor" Wraith Build up
Well changed out the red soft springs in the rear for a little bit heavier duty losi spring. |
01-15-2012, 03:46 PM | #11 |
Rock Stacker Join Date: Nov 2011 Location: Arkansas
Posts: 79
| Re: "Eleanor" Wraith Build up
Well the stock servo finally gave out.. So ordered a 7955TG and it just came in.. Now for the hobby store to open tomorrow and go get a BEC and link. |
01-15-2012, 04:56 PM | #12 |
Quarry Creeper Join Date: Jul 2009 Location: SW Hell
Posts: 241
| Re: "Eleanor" Wraith Build up
When does it start lookin like this? It's nice though so far. http://www.rickybphotography.com/Rig.../DSC0650-M.jpg |
01-15-2012, 05:21 PM | #13 | |
Rock Stacker Join Date: Nov 2011 Location: Arkansas
Posts: 79
| Re: "Eleanor" Wraith Build up Quote:
I might just have to look into getting something built up like that. | |
01-15-2012, 05:27 PM | #14 |
Quarry Creeper Join Date: Jul 2009 Location: SW Hell
Posts: 241
| Re: "Eleanor" Wraith Build up |
01-22-2012, 08:27 PM | #15 |
Rock Stacker Join Date: Nov 2011 Location: Arkansas
Posts: 79
| Re: "Eleanor" Wraith Build up
Well fried a BEC and my ESC somehow.. and now she is stripped and ready for new paint and new electronics! I'm thinking as far as electronics: Tekin 13.5T Redline MMP ESC 32P 60/15 geared HR swaybar kit(maybe) FlySky FS-GT3B Controller and RX Maybe 3S Lipo any other suggestions? See anything wrong with that combo? |
"Eleanor" Wraith Build up - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Project "Clampy" 1.9" Scale Yota Build | 51WillysJeep | 1.9 Scale Rigs | 717 | 08-09-2019 05:58 AM |
Rckcrwlr's Wraith "STAGE" Build | Rckcrwlr | Axial Wraith | 42 | 04-30-2013 06:57 PM |
My "Frogger" build "Litoria xanthomera" | DRV KRAWLER | Axial AX-10 Scorpion | 61 | 10-04-2011 09:09 PM |
Chaotic Crawlers "DEMON" build! aka "Kreacher" | Mac10 | EnRoute Berg | 96 | 09-26-2010 01:49 PM |
| |