Replacement Axial AS-2 Servo Gears???

[NFA Fabrication]

I have dumped an irresponsible amount of cash into RC in the last few months (Cars, Crawlers, Planes...), and my drunk roommate smashed my Wheely King, into my Wraith, and manage to break both cars (The WK's servo horn, and body, and the Wraiths servo gears). With my Castle BEC @ 6V, the AS-2 is manageable for now. Is there a way to buy replacement gears until I can get a real servo? I have searched and have come up empty handed. I have heard rumors that it is a re-badged Futaba? Thanks for any assistance!

[srt6]

probly gonna have to get a new servo, ppp make a good servo for $30 shipped, i've ran them on a lot of scalers and they're great, 208oz o-ring sealed, metal gears 208oz High Speed Metal Gear Replacement Streeing Servo | eBay here's a video of my old scx10 with this servo http://www.youtube.com/watch?v=MDihPL4vvnU

[wmartinlsmith]

the original is made by a company called blue bird, from what i have been told.. and better to just drop some dough on a new one rather than try to salvage a stock pos.. you can always try to flip the gearing also to get you up and running.

[transambill]

Originally Posted by srt6

probly gonna have to get a new servo, ppp make a good servo for $30 shipped, i've ran them on a lot of scalers and they're great, 208oz o-ring sealed, metal gears 208oz High Speed Metal Gear Replacement Streeing Servo | eBay here's a video of my old scx10 with this servo brushless axial scx10 - YouTube

I have a couple of those. Work great for a wench servo but will not turn the wheels on my 1.9 unless it's already moveing.
Put one in my rig as a temp fix till my Hitec 7954 came in and it was pitiful.

As others have said, the stock axial servo is junk rite outta the box and the best fix for those is strait into the trash.

[2500hdon37s]

I use this Savox in my wraith, with 277oz@ 6v it works great! fast and strong!

i recently had to go to an alum. servo arm because of it stripping plastic arms.

[ektoz]

Originally Posted by 2500hdon37s

I use this Savox in my wraith, with 277oz@ 6v it works great! fast and strong!

i recently had to go to an alum. servo arm because of it stripping plastic arms.

+1 to that! I use savox to all my rigs

[666]

Post up in the wanted section and gather parts?

[xLPlushy]

I have an AS2 laying around. It glitches a bit-probly from being in water and snow. $15 shipped if you wanna rebuild it and use it for parts.


Tapatalked via iPhone

[NFA Fabrication]

Thanks for suggestions. I think I am just going to pull the trigger on a new servo. My buddy is happy with a Hitec one he got for around $100 with Titanium gears. Forgot the Model #, but he has had no issues since, and has been running it a while now.

[666]

A Hitec, 5955,7955,7950, or 7990 will be on that rig for years.