|
| LinkBack | Thread Tools | Display Modes |
02-29-2012, 09:23 PM | #1 |
Metal shaper Join Date: Dec 2008 Location: Hog Eye, Texas
Posts: 3,519
| Where's the Beef: Titan 60s !!FINALLY COMPLETE!!
I wanted something more scale and extremely durable. So I spent a couple hours at the machine shop and came up with the Titan 60 axle housings. These are not a production piece from Carter Fab & Machine. It's obviously expensive having to buy 2 aluminum housings, 2 sets of rear axles and having to have all the machine work done. This is more for the die hard scale guys. I can modify housings to any width, and provide the rear axle shafts for the centered housing. Plastic housings are easily modified to center housings and it's cheap. The Titan housings feature aluminum pumpkins and steel tubes. Also have the pumpkin shaved for more clearance, as this is common in 1:1. No more screws holding everything together. Housings can be centered, narrowed, or widened. Shaved pumpkin All done Front housing, pre link mounts and haven't drilled for c hubs. Tubes are machined from 5/8 diameter drill rod With steel cross-members and notches in axle tubes Rear shafts Ready to send off. And a centered plastic housing Thanks Clay Carter Fab & Machine Clear Eyes, Full Hearts, Can't Lose Last edited by CarterFab; 03-31-2012 at 08:48 AM. |
Sponsored Links | |
02-29-2012, 10:38 PM | #2 |
I wanna be Dave Join Date: May 2011 Location: Lost in Oregon
Posts: 4,450
| Re: Where's the Beef: Titan 60s
Wow...all the weight right where you want it What's the weight on these Clay? |
02-29-2012, 10:49 PM | #3 | |
Metal shaper Join Date: Dec 2008 Location: Hog Eye, Texas
Posts: 3,519
| Quote:
Clear Eyes, Full Hearts, Can't Lose | |
02-29-2012, 11:04 PM | #4 |
I wanna be Dave Join Date: May 2011 Location: Lost in Oregon
Posts: 4,450
| Re: Where's the Beef: Titan 60s
Unbelievable...nice...a pound Probably have to sell my soul to afford a set, can't be on the cheap side |
02-29-2012, 11:14 PM | #5 |
RCC Addict Join Date: Aug 2005 Location: Oceano, CA
Posts: 1,154
| Re: Where's the Beef: Titan 60s
damn, those are dope impressive machine work
|
03-01-2012, 01:31 AM | #6 |
I wanna be Dave Join Date: Jan 2006 Location: Corruptifornia
Posts: 12,107
| Re: Where's the Beef: Titan 60s
Boing! nice! I like the centered plastic setup too....would be sweet for Honcho builds.
|
03-01-2012, 01:35 AM | #7 |
Shelf queen Join Date: Aug 2008 Location: Internet
Posts: 5,857
| Re: Where's the Beef: Titan 60s
Those are insane yo!
|
03-01-2012, 05:29 PM | #8 |
Pebble Pounder Join Date: Jan 2012 Location: Locust Hill
Posts: 184
| Re: Where's the Beef: Titan 60s
wow...beautiful pieces, for sure! Can't wait to see them installed!
|
03-01-2012, 06:07 PM | #9 |
Newbie Join Date: Jan 2012 Location: Riverton
Posts: 4
| Re: Where's the Beef: Titan 60s
Those are badass! Ever think of building a set of 9's? Removeable 3rd and all... That would be epic. |
03-01-2012, 06:13 PM | #10 |
Rock Crawler Join Date: Sep 2011 Location: 5280 feet high...
Posts: 760
| |
03-01-2012, 06:42 PM | #11 |
Scale Detail Engineering Join Date: Apr 2010 Location: Turtle Island
Posts: 5,573
| Re: Where's the Beef: Titan 60s
Great googly moogly! |
03-01-2012, 06:53 PM | #12 | |
Metal shaper Join Date: Dec 2008 Location: Hog Eye, Texas
Posts: 3,519
| Quote:
Clear Eyes, Full Hearts, Can't Lose | |
03-01-2012, 08:32 PM | #13 |
I wanna be Dave Join Date: Sep 2005 Location: Houston, TX
Posts: 16,952
| Re: Where's the Beef: Titan 60s
Badass Clay!
|
03-01-2012, 08:37 PM | #14 |
Metal shaper Join Date: Dec 2008 Location: Hog Eye, Texas
Posts: 3,519
|
Thanks guys and now I have an even more bad ass idea if I can just get a set of Blackwell axles, or an almost as bad ass idea with a set of black widows. I have wanted ads placed but maybe one of you knows a source. Clear Eyes, Full Hearts, Can't Lose |
03-02-2012, 03:28 AM | #15 |
Quarry Creeper Join Date: Oct 2011 Location: Land of earthquakes
Posts: 476
| Re: Where's the Beef: Titan 60s
Do you have an estimated price for a set of those? they look sweet and should make the Wraith perform much better |
03-02-2012, 05:29 AM | #16 |
Metal shaper Join Date: Dec 2008 Location: Hog Eye, Texas
Posts: 3,519
|
Can not discuss pricing here. Send me a pm if serious but it ain't cheap. Cheaper if you already have the aluminum housings. Clear Eyes, Full Hearts, Can't Lose Last edited by CarterFab; 03-02-2012 at 09:30 AM. |
03-05-2012, 01:30 PM | #17 | |
Metal shaper Join Date: Dec 2008 Location: Hog Eye, Texas
Posts: 3,519
| Quote:
Or what to build around them? Or just make 2 centered rear diffs for baja trucks? Clear Eyes, Full Hearts, Can't Lose | |
03-05-2012, 01:39 PM | #18 |
RCC Addict Join Date: May 2010 Location: Midwest
Posts: 1,917
| Re: Where's the Beef: Titan 60s
Cool! |
03-08-2012, 04:46 PM | #19 |
Metal shaper Join Date: Dec 2008 Location: Hog Eye, Texas
Posts: 3,519
|
Ultimate 9s coming soon. Wish I wasn't going out of town tomorrow. Can't wait to mod these bad boys and almost feel bad about it. They are gorgeous. Clear Eyes, Full Hearts, Can't Lose |
03-08-2012, 05:06 PM | #20 |
I wanna be Dave Join Date: May 2011 Location: Lost in Oregon
Posts: 4,450
| Re: Where's the Beef: Titan 60s
awesome....those look like sterling silver...beautiful fab work
|
Where's the Beef: Titan 60s !!FINALLY COMPLETE!! - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
can anyone ID this car? (60s?) | STANG KILLA SS | Chit Chat | 5 | 08-10-2011 01:41 PM |
T-Rex 60s on a honcho? | M109R | Axial SCX-10 | 9 | 01-19-2011 10:43 AM |
| |