Axial Wraith Unboxing

[mobilitytoday]

I just got the Wraith and love it.. Just did an unboxing of it and will be doing some crawls this week and video them.. Hope you subscribe..

Axial Wraith unboxing - YouTube

[mobilitytoday]

Did any of you have problems with the rear shocks losing the lower post? Mine popped off the first day.

[BELADOG]

shocks or mounts?
If the shock mount stripped out you will need larger/wider screws.
if the shock itself snapped call Axial. They will send a new pair right out.

[mobilitytoday]

No it's the bottom support bracket. It's plastic. See the photo

[Sevastra]

I didnt have that problem with the stock setup, but do have it with my modified one. Upgraded mine to longer shocks / links with the same stiffness springs. I plan to put a dab of CA on to hold those lower mounts in place, but not enough to fully seal it to the lower shock links so I can remove them later.

Anyone have a better solution aside from tightening the spring nut?

[ZippoMan]

Yes I think just tighten the shock tension nut and it should hold....maybe I am wrong. Seems an easy fix. Or run without springs..hehehe

[shooter125]

if your talking about how to hold the spring cup on and keep it from popping off, just drill a hole in it and run a small zip-tie through it and around the spring itself. Comp rigs have to do it all the time!

[snail78]

you can also use heat shrink to hold it on. when i was running losi shocks on my old rig i used the heat shrink trick and it worked great

[mobilitytoday]

Thanks guys!!!!