02-23-2015, 09:25 PM | #321 |
Quarry Creeper Join Date: Jun 2012 Location: pomona
Posts: 201
| Re: Harley's Guide to a Bulletproof Wraith
I am building Harley's bomb proof trans. I purchased the super shafty top shaft, outputs and Robinson racing slipper. The problem I'm having is the pin to hold the slipper on the shaft is larger than stock and will not fit int the slipper. The instructions on the RR slipper say to use the stock pin. Which is smaller than the pin on the SS. My question is do I file out the slot in the back of the RR slipper to accept the larger SS pin or use the weaker stock pin. Thanks for any help or advice.
|
Sponsored Links | |
03-02-2015, 07:58 PM | #322 | |
Rock Crawler Join Date: Sep 2010 Location: Keego Harbor, MI.
Posts: 951
| Re: Harley's Guide to a Bulletproof Wraith Quote:
Simply Tighten the nut all the way down after assembled and crank on it Then back the nut off to desired position Best Regards rick | |
03-02-2015, 08:35 PM | #323 |
RCC Addict Join Date: May 2013 Location: Forrestfield, Western Australia
Posts: 1,082
| Re: Harley's Guide to a Bulletproof Wraith
Problem was RR Wraith slipper not RR Slash slipper Rick. bullit proof tranny question with pics... I've got 2 of the Slash slipper/beefy top shafts, they work just perfectly. |
03-29-2015, 10:13 PM | #324 |
Quarry Creeper Join Date: Jul 2014 Location: North Florida.
Posts: 242
| Re: Harley's Guide to a Bulletproof Wraith
Well Mini Loco bushings dont last very long mud'n... :( Gonna try the HPI bushings next. |
03-31-2015, 08:54 AM | #325 | |
RCC Addict Join Date: May 2013 Location: Forrestfield, Western Australia
Posts: 1,082
| Re: Harley's Guide to a Bulletproof Wraith Quote:
If that's where/how you wanna run buy a couple sets & cos they're going to be consumables. | |
03-31-2015, 09:56 AM | #326 |
Quarry Creeper Join Date: Jul 2014 Location: North Florida.
Posts: 242
| Re: Harley's Guide to a Bulletproof Wraith
In the end I will get the DeLux mod housings.
|
04-14-2015, 09:32 PM | #327 |
Newbie Join Date: Apr 2015 Location: Bend
Posts: 6
| Re: Harley's Guide to a Bulletproof Wraith
Followed this guide to build my wraith, prevented alot of unnecessary costs to get a killer rig.
|
04-21-2015, 11:35 AM | #328 |
Newbie Join Date: Mar 2015 Location: Brisbane, Aus.
Posts: 20
| Re: Harley's Guide to a Bulletproof Wraith
Can someone tell me if the Robinson Racing HP Slipper Unit 56T Gen 3 Slash as set out on page 1 works with the stock top shaft?
|
04-21-2015, 12:10 PM | #329 |
Rock Stacker Join Date: Mar 2015 Location: NC
Posts: 97
| Re: Harley's Guide to a Bulletproof Wraith
as far as I know, no it won't. You need the Beefy Top Shaft from Super Shafty here- WRAITH & AX-10 BEEFY Top Shaft - Super Shafty |
04-21-2015, 12:17 PM | #330 | |
Newbie Join Date: Mar 2015 Location: Brisbane, Aus.
Posts: 20
| Re: Harley's Guide to a Bulletproof Wraith Quote:
| |
04-29-2015, 05:48 AM | #331 |
Rock Stacker Join Date: Mar 2015 Location: NC
Posts: 97
| Re: Harley's Guide to a Bulletproof Wraith
Does anybody have any thoughts on the Locked Up Slipper Eliminator vs. Super Shafty Beefy Shaft with RR Slash spur? Is the slipper a good insurance policy? I see much more info on the SS/RR slipper than the Eliminator so I would have to assume it is a more popular combo. |
05-14-2015, 09:20 PM | #332 |
Rock Stacker Join Date: Nov 2009 Location: Grant County, Indiana
Posts: 54
| Re: Harley's Guide to a Bulletproof Wraith
Wish the original posts were update with good links.
|
06-10-2015, 03:36 PM | #333 |
Pebble Pounder Join Date: Sep 2014
Posts: 169
| Re: Harley's Guide to a Bulletproof Wraith http://www.hot-racing.com/index.cgi?...CP38HT03;c=456 How strong is this transmission compared the the bomb proof trans build up? |
06-13-2015, 01:53 PM | #334 |
Pebble Pounder Join Date: Sep 2014
Posts: 169
| Re: Harley's Guide to a Bulletproof Wraith
No one?
|
06-13-2015, 02:26 PM | #335 |
RCC Addict Join Date: Aug 2012 Location: Philippines
Posts: 1,652
| Re: Harley's Guide to a Bulletproof Wraith
Not as strong.
|
06-13-2015, 02:31 PM | #336 |
Pebble Pounder Join Date: Sep 2014
Posts: 169
| Re: Harley's Guide to a Bulletproof Wraith
What part is not as strong?
|
06-13-2015, 04:07 PM | #337 |
RCC Addict Join Date: Aug 2012 Location: Philippines
Posts: 1,652
| Re: Harley's Guide to a Bulletproof Wraith
I don't own a hot racing tranny, but I'd say the spur and the outputs are not as strong.
|
06-13-2015, 04:31 PM | #338 |
Pebble Pounder Join Date: Sep 2014
Posts: 169
| Re: Harley's Guide to a Bulletproof Wraith
Well I'm fine with the spur being not as strong. Because thinking about going plastic anyway. That way that's my week link in drive line.
|
06-13-2015, 08:08 PM | #339 |
20K Club Join Date: Jul 2004 Location: Sending illegals home one Hayabusa at a time.
Posts: 22,981
| Re: Harley's Guide to a Bulletproof Wraith
The biggest issues with those has been bent top shafts and the output through holes being sloppy on some. I haven't seen an output break on them, but I haven't ran with one.
|
06-13-2015, 08:13 PM | #340 |
Pebble Pounder Join Date: Sep 2014
Posts: 169
| Re: Harley's Guide to a Bulletproof Wraith
I'm only running on 3s so do you think I will be fine Harley?
|
Harley's Guide to a Bulletproof Wraith - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Harley's Axial Wraith Build - Jimmy's 4x4 Ultra 4 KOH Style | Harley | Axial Wraith | 2725 | 02-11-2020 07:19 AM |
Wraith Beginners Guide | Harley | Axial Wraith | 1058 | 06-24-2019 06:52 PM |
Harley's Complete XR10 Guide | Harley | Axial XR10 | 319 | 07-14-2014 12:00 AM |
Harley's Wraith #2 - Built for Vanquish | Harley | Axial Wraith | 66 | 11-05-2012 06:17 PM |
Harley's Wraith Sportsman | Harley | Axial Wraith | 123 | 01-21-2012 05:35 PM |
| |