Brandon's 1.9 Wraith Build

[jeeper_05]

Originally Posted by Brandon

Its a traxxas part, I cant seem to find the part number anywhere right now to help you out. I'm sure somebody can chime in with the correct info on them

https://www.rpphobby.com/ProductDeta...tCode=TRA3727A

[Brandon]

Originally Posted by jeeper_05

https://www.rpphobby.com/ProductDeta...tCode=TRA3727A

Thank you!

[kmoore]

Looks great Brandon! All the info I was looking for in one thread. Any thoughts on mirroring an scx10 trans under the interior? Just wondering if it'll still clear. If you had tried it. Thanks again!

[jpomenich]

man you build some nice rigs

[Brandon]

Originally Posted by kmoore

Looks great Brandon! All the info I was looking for in one thread. Any thoughts on mirroring an scx10 trans under the interior? Just wondering if it'll still clear. If you had tried it. Thanks again!

Thank you! I have not tried running the trans flipped. There might be some interference with the interior tray.

Originally Posted by jpomenich

man you build some nice rigs

Thanks!

[jeepscx10]

Originally Posted by Brandon

I have not tried running the trans flipped. There might be some interference with the interior tray.

Mirroring the SCX10 tranny does interfere a little with the interior, the motor causes the driver side of the interior to bow upward a little, which i didn't like but fixed it with a little heat to mold it to the curve of the motor and problem solved no more bowed interior.

[Meatwad]

Hey now, that's a lot more elegant than chopping a hole in it like I did But it's for cooling purposes, yeah that's why I did it too!

[DeweyCJ5]

any video or news on this rig ?

[Fowlboy]

This has inspired me to build another EB!.... Great build!

[DrDiff952]

I am wondering about the Radio Shack Project box. Did you mount it opening up or down? How water tight is it? Can you get a better picture of it?

[Arctic Fire]

I'd really love to see it with the doors on, any chance for some pics?

[Richterat83]

Originally Posted by Brandon

Neither. I went through some trial and error to get the wheelbase to match the openings on the body.

Keep in mind the SCX10/AX10 axles have the AX80043 4-Link Axle truss installed.

Front Lower links: AXA1427 50mm posts with AX80005 bent ends on one side, and the short bent AX80057 ends on the other.

Front Upper Links: AXA1427 50mm posts with AX80057 short bent ends on both ends.

Rear upper and lower links: AX30714 7x73 Links with the long bent rod ends from AX80057 on each end.

2X TowerHobbies.com | AXIAXA1427 AXA1427 Axial Post 7x50mm Grey (2)
2X TowerHobbies.com | AXIAX80057 AX80057 Axial Linkage Set XR10
1X TowerHobbies.com | AXIAX80005 AX80005 Axial Linkage Set
2X TowerHobbies.com | AXIAX80043 AX80043 Axial Links Parts Tree RTR SCX10
2X TowerHobbies.com | AXIAX30714 AX30714 Axial Threaded Aluminum Pipe 7x73mm Grey (2)

Ill add some pics in a minute.

Thanks for this, just ordered the links and parts trees along with a stainless hardware kit to start my 1.9 wraith

Love this build!

[gsrcivic]

Man never really caught on to the 1.9 wraith look but u axial guys sure do know how to use all axial parts for a axial rig lol....looks awesome brandon keep it up

[Richterat83]

Curious if you've got a pic of how much you trimmed where the tires were rubbing. I've got zero flex when the wheels turned (tires hit the chassis)

[jerrodww1974]

I like this build so much when I was shown Brandon's build I was inspired to build one like it.

[Brandon]

Originally Posted by Richterat83

Curious if you've got a pic of how much you trimmed where the tires were rubbing. I've got zero flex when the wheels turned (tires hit the chassis)

What tires are you running? I have 1.9 ripsaws on this build, they are fairly short compared to a lot of the newer scale 1.9's on the market now.

Originally Posted by jerrodww1974

I like this build so much when I was shown Brandon's build I was inspired to build one like it.

That looks great!! Good job

[Richterat83]

R35 1.9 Treps

[Brandon]

Originally Posted by Richterat83

R35 1.9 Treps

You might have to stretch the front wheelbase a bit to help with clearance then.

[Richterat83]

I'll swap the 1.9 ripsaws over off the XJ first and check it again. Worst case, i stretch the wheelbase. Just hoping to still have it fit a Dingo body

[difflock120]

What a nice build thead. Thanks for sharing.