JIA's IFS Ultra4 build

[Soulo747]

Good work, Jason. This starts to venture away from a "build" and into electrical engineering. Impressive.

[Etype R]

You should print some black rim inserts and tape them on your rims while your at it

[JasonInAugusta]

Originally Posted by Soulo747

Good work, Jason. This starts to venture away from a "build" and into electrical engineering. Impressive.

Thanks man. It's simple yet complicated, if that makes sense.

Originally Posted by Etype R

You should print some black rim inserts and tape them on your rims while your at it

Ohhhh, you did it!

[Soulo747]

Have you considered maybe offering a buy-able "rtr" driver figure? I'd buy one if so... Something I could just plug into channel 3 and have his head and arms move.

Some say his neck is actually a micro servo.... Others say he is powered solely by unicorn giggles.

[YoUnG_vErSiOn]

you need an opio image in there somewhere. haha

[Soulo747]

Opio? From hiero?

[JasonInAugusta]

Originally Posted by Soulo747

Have you considered maybe offering a buy-able "rtr" driver figure? I'd buy one if so... Something I could just plug into channel 3 and have his head and arms move.

Some say his neck is actually a micro servo.... Others say he is powered solely by unicorn giggles.

Arms are stationary on this guy. Just the head moves. Making the arms move would require another servo /Y-harness and the arms would no doubt fly off under Pro4 power.

I have over $100 in parts/materials in the driver. I seriously doubt there'd be a market for one after I add labor. Not to mention actually painting one.

[Soulo747]

Lol pro 4 arm yank is never good. True story about the overhead. Not a very feasible investment I suppose.

Looks like I might have to unlazyfy myself.

[alaskancrawler]

Looking awesome Jason. Looks like your getting close to being able to start driving it.

[XSRCdesign]

Originally Posted by young_version

not to be mean or anything, but it looks a bit under resolution for print quality. id go with a vectored image for a much cleaner image. im no graphic artist by trade or anything...

but i just trace vectored a logo from axials website inside my work truck.
Attachment 219055

took me all of five minutes.

I'm pretty sure axial actually has a downloadable vector on their website, that is where I got mine, took even less time

[JasonInAugusta]

Yup.

Axial Racing - logos

[jason]

Originally Posted by JasonInAugusta

How's this look?

Needs more RCC!

[JasonInAugusta]

Originally Posted by jason

Needs more RCC!

RCC Oval is already on the list.

[braceysdad]

Panels look great! You or whoever nailed the artwork... You have pm

[JasonInAugusta]

Originally Posted by braceysdad

You have pm

Umm...no, I don't.

[braceysdad]

Originally Posted by JasonInAugusta

Umm...no, I don't.

sure you do... I didn't say it was from me

[JasonInAugusta]

Finally got some work done. Made Stig's visor.

There's more blue tint than what this image shows.

[alaskancrawler]

Jason if you have the lexan off the roof again can you post up a picture of what you did to the roof bars? I went back thru the thread and couldn't find a picture without the lexan after completion. Thanks happy new year



PHP][/PHP]

[MiniMorris]

Originally Posted by alaskancrawler

Jason if you have the lexan off the roof again can you post up a picture of what you did to the roof bars? I went back thru the thread and couldn't find a picture without the lexan after completion. Thanks happy new year



PHP][/PHP]

Also look at the roof on his SA rig. It dosnt use the exo piece, it uses stock roof. So if you plan to run a roof, than you might as well not mess with the roof. My $.02

[alaskancrawler]

I do plan on running a roof. That's what I was curious about. Is using the wrath section of roof better or the modded exo roof the way to go? Believe me I've stared at both threads for hours. So after hours I need to ask questions.