Differential ~ Slop @ Pinion (36/14)??? Im noticing a fair amount of play (slop) in the pinion at the diffeential which seems to be coming from the bearing inner race. Im sure this is common on any pinion/ring gear combo but how are you guys combatting this one? |
Re: Differential ~ Slop @ Pinion (36/14)??? up/down//left/right play or in/out? Are there two bearings and both are good? I put a Traxxas teflon 5mm washer between the outer bearing and MIP shaft to keep the pinion out away from the diff where the mesh seems happiest and left it at that. |
Re: Differential ~ Slop @ Pinion (36/14)??? in/out which i beleive is fine, its up/down making the driveshaft wobble signifigantly by hand (manual) and the bearings are both still relatively new. Just got the wraith a month or so ago and have only a dozen runs on er' |
Re: Differential ~ Slop @ Pinion (36/14)??? I've got the overdrive ring and pinion in my Wraith and there is a little up/down play, but it doesn't seem to affect the balance of the drive train. Stock WB driveshafts with inserts for strength. Maybe your driveshaft(s) have a bit of a twist making them run out of balance? |
Re: Differential ~ Slop @ Pinion (36/14)??? Quote:
|
Re: Differential ~ Slop @ Pinion (36/14)??? the only stock parts left on my axles are the lockers (Fr/Rr) and the drive-shafts. Eventually ill get the VP lockers and MIPs but for now...itll have to do! this Wraith is one helluva moneypit *jeesh* :lmao: |
Re: Differential ~ Slop @ Pinion (36/14)??? Just run it. It will be fine. |
Re: Differential ~ Slop @ Pinion (36/14)??? I had in out slop so i just installed some 5mmx8mmx.05mm durango shims on the outside of the pionion shaft. No more play "thumbsup" |
All times are GMT -6. The time now is 05:12 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com