|
| LinkBack | Thread Tools | Display Modes |
09-15-2012, 03:30 PM | #1 |
Rock Crawler Join Date: Sep 2011 Location: 5280 feet high...
Posts: 760
| Should I put this in my wraith?
I want more power and can't afford a pro 4 at the moment. I'm tired of my exo which is running a Novak ballistic 4.5 turn 550 sensored motor. Spare me your thoughts on Novak products please. It has really good low end, no clogging whatsoever and obviously plenty of power. Yay or nay? |
Sponsored Links | |
09-15-2012, 03:47 PM | #2 |
Rock Crawler Join Date: Dec 2011 Location: thurmont
Posts: 732
| Re: Should I put this in my wraith?
i dont see why not as long as your drivetrain is beefed up
|
09-15-2012, 04:00 PM | #3 |
Rock Crawler Join Date: Sep 2011 Location: 5280 feet high...
Posts: 760
|
It is. Robinson internals, MIPs.... If anything is gonna break, it'll be my axles. I'm building for TTC next year (we don't all have the time to slap together amazing rigs in a matter of weeks like some of the talented fabricators on this board ;)).
|
09-15-2012, 04:25 PM | #4 |
Rock Crawler Join Date: Apr 2012 Location: Chattanooga
Posts: 639
| Re: Should I put this in my wraith?
I say go for it, I put a pro 4 in mine this weekend with a rc4wd 2 Spd trans and it is awesome for crawling in low and stupid fast in high. The pro4 is awesome! So give the Novak a try, watch your temps, have fun and if it doesn't work, well at least you gave it a whirl
|
09-16-2012, 10:59 PM | #5 |
Rock Crawler Join Date: Nov 2007 Location: Bay Area (RWC)
Posts: 536
|
I run that motor in my Wraith. Works great, tons of torque and very fast. I run 15/56 and I just went down to 12/56 to slow it down a bit. You will need to trim the rear link area a bit as the motor it long.
|
09-17-2012, 07:06 PM | #6 |
RCC Addict Join Date: Dec 2011 Location: Raleign
Posts: 1,439
| Re: Should I put this in my wraith?
I geared down to 12/56 and my motor actually got warmer. I think it was undergeared.
|
09-18-2012, 06:44 AM | #7 |
Newbie Join Date: Sep 2011 Location: Ridge
Posts: 35
| |
09-18-2012, 09:51 AM | #8 |
Quarry Creeper Join Date: Jan 2012 Location: My house
Posts: 237
|
Hey do it I have the tekin 4.5 and all RR gears man just like everyone said as long as its beefed up ur drive shafts an all ur good. Also before u put that motor in make sure u get the beefed up lockers man I broke like 6 of them and also have spare gear cases if u have plastic ones or just upgrade to the steel ones. Just my .02
|
09-18-2012, 10:47 AM | #9 | |
I wanna be Dave Join Date: Jan 2006 Location: Corruptifornia
Posts: 12,107
| Re: Should I put this in my wraith? Quote:
| |
09-18-2012, 08:34 PM | #10 |
Rock Stacker Join Date: Dec 2011 Location: Destin
Posts: 61
| Re: Should I put this in my wraith?
I say run it, but like Hi-Intentionz said if you haven't replaced the stock locker setup, that's probably something you should look at.
|
09-21-2012, 09:16 PM | #11 |
Rock Crawler Join Date: Sep 2011 Location: 5280 feet high...
Posts: 760
|
So lockers are next on the list. Thanks fellas.
|
09-22-2012, 04:29 AM | #12 |
Rock Stacker Join Date: Feb 2012 Location: Auburn
Posts: 87
| Re: Should I put this in my wraith?
I had that motor in my Wraith for about 5 minutes. Got in a moderate bind, tried to power out of it and blew the front universals apart. Was fun while it lasted!!! My uni's may have already been on the way out, but this finished them off for sure!! Didn't want to chance it again, so I took it back out.
|
Should I put this in my wraith? - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Not sure where to put this? | guncrazy72 | Chit Chat | 28 | 08-30-2011 09:43 AM |
where to put my lipo | boostedg60rado | RC4WD Bully | 4 | 06-28-2009 04:57 AM |
when She doesnt put out | slobin3d | Chit Chat | 13 | 07-01-2006 08:26 AM |
| |