Solid axle Ultra4 build Built this from the used Wraith I got when we were in the hotel. Did the Exo graft on the rear end with Integy rear shocks. Pro-line Powerstrokes for Slash front on the front. Dynamic Concepts Rubicon body pieces are being used up front. I'll be making side panels. Power will come from the Novak Timbuk2 with the 13.5 turn Novak motor that came with the rig. Wheels are the RC4WD Predators that young_version gave me for the IFS build and the tires are Pro-Line TSLs that were mounted on Integy beadlocks when I bought the rig. A little Simple Green and they look almost new. Anyway, it's a start. https://sphotos-a.xx.fbcdn.net/hphot...36437758_n.jpg |
Re: Solid axle Ultra4 build Primed and painted a set of Ultimate inner fenders from Carter Fab and Machine. https://sphotos-a.xx.fbcdn.net/hphot...97542000_n.jpg I also did lots of work on panels today. :lol: |
Re: Solid axle Ultra4 build This lil' dude has been showing up every night as of late. Normal to have these guys here in Hawaii, but this lil' dude will come on the bench while I'm working. For the past three nights. Local guys say I should name him and he'll watch over the house. Guardian God. So I guess I'll call him Ralph, or Lalepa. :mrgreen: When I tried to take pictures of him he came toward me and jumped on my phone. :lol: Took him outside the garage, put him down, and he came back to me. :shock: http://sphotos-b.xx.fbcdn.net/hphoto...73705282_n.jpg |
Re: Solid axle Ultra4 build My mom lives in hawaii too. She's told me about these little guys...I think you should name him Moe.. After all he may just be a Mo'o.. Plus I think Moe the Mo'o just fits.....lol |
Re: Solid axle Ultra4 build Do you really need a longer shock on the rear?? |
Re: Solid axle Ultra4 build Quote:
Quote:
Look at my IFS build thread to see what happens when you have only the Wraith shocks on the rear. |
Re: Solid axle Ultra4 build A scale lizard...Pretty cool !!! |
Re: Solid axle Ultra4 build Quote:
|
Re: Solid axle Ultra4 build I remember those little suckers :mrgreen: |
Re: Solid axle Ultra4 build Got all of the cage work done on this rig. Everything is now bonded with adhesive and I made the compression brace that spans the lower joint. Notice the use of the forward portion of the Wraith top cage. This allows the removal of the two front screws and you can hinge the top cage section out of the way. https://sphotos-a.xx.fbcdn.net/hphot...92906074_n.jpg https://sphotos-b.xx.fbcdn.net/hphot...86671433_n.jpg |
Re: Solid axle Ultra4 build Man you make the two cages look good together. Nice job. |
Re: Solid axle Ultra4 build Cage work looks mint! Looks like it came that way "thumbsup" |
Re: Solid axle Ultra4 build Relocated the stock battery tray and mounted the RX box again. https://sphotos-a.xx.fbcdn.net/hphot...22162112_n.jpg |
Re: Solid axle Ultra4 build Looking Awesome!!"thumbsup" |
Re: Solid axle Ultra4 build Looks solid Jason!! I like your co-pilot too |
Re: Solid axle Ultra4 build Lovin it. Really like both builds"thumbsup" |
Re: Solid axle Ultra4 build Word of the day is tired. Started at 8 this morning. DTP came over and got his running. It's slow with a 7-turn puller. :lol: I also scored DTP's TTC tires. :mrgreen: (thanks, dude) https://sphotos-a.xx.fbcdn.net/hphot...05247409_n.jpg Now I just need a certain rig to put them on. :lol: Young_version made progress on his - mostly cosmetic stuff. His should be running soon. https://sphotos-b.xx.fbcdn.net/hphot...80842595_n.jpg |
Re: Solid axle Ultra4 build Electronics tray made from .025" aluminum. http://sphotos-a.xx.fbcdn.net/hphoto...97533292_n.jpg |
Re: Solid axle Ultra4 build I really love that back end it looks sweet8) |
Re: Solid axle Ultra4 build Last night I made side panels to go along with the Dynamic Concepts Rubi panels then shot them with Pactra's metallic blue, backed with silver, then sprayed the flares with black. Cut the mask from the flares and dulled them with a 3M pad. Used duct tape on the back of each panel to protect the paint from abrasion against the frame. Time to add some random decals and maybe some lights. https://sphotos-a.xx.fbcdn.net/hphot...14314844_n.jpg DTP swung by last night and worked on his IFS rig. It's niiiice with the AX2 and Pro4. :mrgreen: https://sphotos-a.xx.fbcdn.net/hphot...85312418_n.jpg |
All times are GMT -6. The time now is 06:03 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com