Fiona (Pic/Tech Heavy)

[TheScaleAddict]

Originally Posted by slimfire

Ok then one more question.... what inserts are u using? (Foams). Tks


- slim -

They are Proline Dual Stage Memory Foams.




They're nice, but I am itching to get some Crawler Innovations Closed Cell Dual Stage Foams.

[slimfire]

Originally Posted by cephas

They are Proline Dual Stage Memory Foams.




They're nice, but I am itching to get some Crawler Innovations Closed Cell Dual Stage Foams.

Super! Thanks a lot again!


- slim -

[jclc]

Hello,
what to say ..... it's just the most beautiful I've seen Wraith.

Original, exclusive and great achievement.

I can not find the cage BGR with the V on the front of the cage.

I contact BGR but I had no response for this cage.

It is unique and it manufactures in series?

[mtgrizzlymn]

Originally Posted by jclc

Hello,
what to say ..... it's just the most beautiful I've seen Wraith.

Original, exclusive and great achievement.

I can not find the cage BGR with the V on the front of the cage.

I contact BGR but I had no response for this cage.

It is unique and it manufactures in series?

No Bill will make it I have one to on my bronco build very cool

[TheScaleAddict]

Originally Posted by mtgrizzlymn

No Bill will make it I have one to on my bronco build very cool

What he said. Bill does great work. Send him an email or a PM. He will take good care of you.

[TheScaleAddict]

Awwww snap.... Fiona took on the Sheep. Sheep Mountain, that is... We didn't make it all the way to the summit. My front drive shaft fell apart on the way up. I found all of the pieces and put it back together. That got me another thirty minutes or so of run time before it let loose again. The second time around, I couldn't find the barrel that holds the pin into the transmission side of the MIP drive shaft. I ended up completely removing the front drive shaft and descending in rear wheel drive.

While the video doesn't really do it justice, I'll just say this: Fiona almost died. I barely caught her on a roll over that would have sent her tumbling hundreds of feet down a VERY steep incline. Much of the trail has fairly steep and open drop offs. That being said, I was a bit 'sheepish' with my driving style. And yes, that pun was intentional!

I used Windows Movie Maker to put the video together. All in all, it was VERY easy to do. Unfortunately, I noticed (after I uploaded the video) that I missed one of the transitions between clips. Still, I think it came out pretty darn good. I hope y'all enjoy my video. It was my first with the GoPro3. I'm liking that little thing. They will certainly be more videos to come!

[Diablo666]

That video is sweet. Where is sheep mountain at? I need I need to go check that place out with the xr10 and when I get my wraith done I will be making a trip.

[TheScaleAddict]

I'll have to show you. It's really a nice hike. Plenty of fun obstacles to go G6'n.

[gec]

Cool video mate, she sure is a nice truck.

[TheScaleAddict]

Originally Posted by gec

Cool video mate, she sure is a nice truck.

Thanks.

[slimfire]

Originally Posted by jclc

Hello,
what to say ..... it's just the most beautiful I've seen Wraith.

Original, exclusive and great achievement.


.....

Totally agree!



- slim -

[TheScaleAddict]

I'm honored. Thanks to you both.

[slimfire]

More videos please!!!! (Already subscribed your YouTube chsnnel).

PS: do u use weights in ur wheels? If so how much? Thanks



- Slim -

[evan03]

I just installed the crawler innovations dual stage foams in my boggers and ohh my its like a hole new rig. These boggers can now hold there own side hilling.

Might be one if the best mods of done.

[TheScaleAddict]

Originally Posted by slimfire

More videos please!!!! (Already subscribed your YouTube chsnnel).

PS: do u use weights in ur wheels? If so how much? Thanks



- Slim -

I don't advise weighting wheels. Too much strain on the drive train. I would suggest knuckle weights. I use Blue Monkey RC knuckle and lock out weights. They work great.

[evan03]

I've seen no I'll effects with about 4oz in each front wheel..

Probly about 5 hours run time like this.

[TheScaleAddict]

I wouldn't add an oz to my wheels. I'm putting Fiona on a diet though... She's been eating motors lately. Of course, that tends to happen... It's all part of the game.

[evan03]

Ouch. That sucks. What motors is she eating?

[slimfire]

Originally Posted by cephas

I don't advise weighting wheels. Too much strain on the drive train. I would suggest knuckle weights. I use Blue Monkey RC knuckle and lock out weights. They work great.

I am running 90gr (approx 3,2 Oz) only in the front wheels and seems not to be tough for the trans, however I also have the front Blue Monkey RC weight kit to be installed! Will try and let you know! Thanks!


- slim -

[TheScaleAddict]

Originally Posted by evan03

Ouch. That sucks. What motors is she eating?

Brushed, brushless, she's not picky. LOL