Szczerba's 2.2 CXT 3 Attachment(s) Objective: Make a 2.2 Rig to run in the Sept 28 Recon G6 in Hot Springs, AR Body: 1/6th Scale CXT Cab Chassis: Built by me Wheelbase: 17.5" Axles: Plastic Wraith Axle Cases HD Axial Gears GripFab Stainless Steel Lockers Axial Lower Link Mounts Vanquish Wraith Chubs C-Hub Vanquish Wraith Steering Knuckles Vanquish Titanium Tie Rods RC4WD ARB Diff Cover for Wraiths Axial universal's "Dinky Link" S-Type (Front) Stock Wraith Rear 4-Link Transmission: Vanquish Aluminum Axial Transmission Supershafty.com one piece motor mount Axial Spur Cover Crawler Innovations 4340 steel; 5mm - Axial Trans Output Pair MIP Driveshafts. Cut, chopped, rebuilt. 32 pitch gears 54-60t 15-20t pinions Shocks.. 4" Bigbores with Revo rod end mod (for now) Links.. Vanquish Ti Uppers and Lower Links Electronics: ESC: Mamba Max Pro Motor: Tekin Redline 13.5 (For Now) Servos: Hitec 7950th BEC: Castle Creations Battery: Valuehobby.com 3s Lipo Wheels/Tires/Foams.. Wheels: TSS Rockrawler 2.2 wheels modded for SLW Hubs Tires: Proline 2.2 TSL's Hubs: Vanquish 225 SLW Foams: Crawler Innovations/2.2 Double Deuce Foams<!-- google_ad_section_end --> |
Re: Szczerba's 2.2 CXT :shock:"thumbsup" J |
Re: Szczerba's 2.2 CXT 2 Attachment(s) Quote:
Good ol' drill press, manrel and 3" cutoff wheel. |
Re: Szczerba's 2.2 CXT Quote:
J |
Re: Szczerba's 2.2 CXT Quote:
|
Re: Szczerba's 2.2 CXT Quote:
When I got about halfway through the second side the cut side was flexing around a bit. I thought about tacking the already cut side back together real quick but that was too much effort and kept cutting. :ror: Black paint is my friend. Quote:
|
Re: Szczerba's 2.2 CXT 1 Attachment(s) first chassis iteration :shock: I mocked it up and thought to myself. "Oh yea, geometry does matter on 1:10scale rigs too. Let try again" |
Re: Szczerba's 2.2 CXT glad that big body finally found a home.... it was taking up my project space.. |
Re: Szczerba's 2.2 CXT What's your plan for a bed? |
Re: Szczerba's 2.2 CXT It may be over the top but that thing would be bitchin with big stacks and a smoke machine. |
Re: Szczerba's 2.2 CXT Quote:
|
Re: Szczerba's 2.2 CXT Quote:
J |
Re: Szczerba's 2.2 CXT Quote:
Quote:
Quote:
Quote:
Quote:
|
Re: Szczerba's 2.2 CXT 2 Attachment(s) 2nd Chassis setup. Meh. |
3rd chassis setup. Mucho betterer. Snuck some Mattzilla 3 hole tabs on the subframe. 3 holes of upper link adjustment. Lower cross bar is just sitting in place for now. Trans mount made. http://img.tapatalk.com/d/13/09/20/dujaqyhe.jpg Sent from my thumbs. |
Re: Szczerba's 2.2 CXT 4 Attachment(s) I chop, therefore, I am. Ignore the lower subframe brace not welded in. Cab is just chillin on the rails too. |
Re: Szczerba's 2.2 CXT It would make a cool t5 support truck. |
Re: Szczerba's 2.2 CXT I find that I keep wandering into this thread, I can't wait to see how it turns out. |
Re: Szczerba's 2.2 CXT Quote:
Quote:
I started last week and have been taking photos along the way. I am out of pictures as of now. I have cut and rewelded the MIP's to 6" for the driveshafts. Used 3/8", 0.04"something walled tube. Next up is shock hoops and body mounting. Probably going to hinge the body up front with a small 5/32" rod frame. 1/4" and 3/8" tube should be at the house now for the sliders, headache rack and bed. |
Upper link mounts mocked up. http://img.tapatalk.com/d/13/09/20/qa8e8epu.jpg http://img.tapatalk.com/d/13/09/20/ezezyne9.jpg Ghetto fabbin http://img.tapatalk.com/d/13/09/20/temu7a2y.jpg http://img.tapatalk.com/d/13/09/20/butenuta.jpg Sent from my thumbs. |
All times are GMT -6. The time now is 11:23 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com