Re: CC's Nothing special Wraith :) Love it, nice and smooth down low and great wheel speed. Bags of torque, the stock slipper is struggling and keeps loosening up after a few mins though, glad I'm going over to Gen3 slipper soon :) |
Re: CC's Nothing special Wraith :) You trucks making me spend my money on mine! just ordered the Radshape rock sliders and inner fenders |
Same! I want a better slipper now and buying more parts. Great thread. Sent from my LG-E980 using Tapatalk |
Re: CC's Nothing special Wraith :) Some more parts turned up today FI Lockers http://i801.photobucket.com/albums/y...ps06es9quy.jpg Alloy trans case http://i801.photobucket.com/albums/y...psl9gvfmzk.jpg I'm really impressed with the trans case, everything fits in it perfectly and the machining is really good Also got some Oilite bearings to replace the pinion bearings when I rebuild the axles with the Lockers and HD gears :) |
Re: CC's Nothing special Wraith :) I think I am going to borrow the ideal of esc on top. I thought it would fit like others said. Did you use velcro? |
Re: CC's Nothing special Wraith :) Double sided tape and a cable tie round the whole lot :) |
Re: CC's Nothing special Wraith :) Took her out again yesterday http://i801.photobucket.com/albums/y...psjavjjfea.jpg http://i801.photobucket.com/albums/y...pssc1k3hyu.jpg http://i801.photobucket.com/albums/y...psqalbcud1.jpg http://i801.photobucket.com/albums/y...pswayur0u0.jpg http://i801.photobucket.com/albums/y...ps3abqfgyc.jpg A few issues to work through, the slipper is officially junk, still waiting for my Gen3 from Amain's, stripped the plastic servo mounts, alloy ones now ordered and the beadlocks struggled to keep the tyres on in the wet. Time for an upgrade :) |
Re: CC's Nothing special Wraith :) |
Re: CC's Nothing special Wraith :) Whilst I was cleaning the Wraith I decided to fit the lockers and Oilite bearings to the Pinion gear http://i801.photobucket.com/albums/y...ps9job5mls.jpg http://i801.photobucket.com/albums/y...pshte0wcz2.jpg Shame I will have to strip it all again when my HD gears turn up lol |
Re: CC's Nothing special Wraith :) How do you like the gmade piggybacks? |
Re: CC's Nothing special Wraith :) Great! No leaks and work great, I took out the bump stops which helps for a bit of extra flex |
Re: CC's Nothing special Wraith :) Got my next lot of hop ups today in the post :) |
Re: CC's Nothing special Wraith :) |
Re: CC's Nothing special Wraith :) Finished up my version of the "Bombproof" transmission http://i801.photobucket.com/albums/y...pshrz8ozso.jpg Not much Axial left in it now lol The spec is RRP Slash Gen3 Slipper Supershafty Beefy top shafy Supershafty Ultimate motor plate RRP Steel idler RRP Steel diff lock gear HR Super Duty drive gear GPM Alloy Trans case RW 12t 32dp pinion I had to use a motor spacer it get a proper mesh, it's a Tamiya one I found on ebay It's running stock 5mm output shafts, I could upgrade these to 6mm but they are not really need for the level of power I'm running |
Re: CC's Nothing special Wraith :) Got some new boots today http://i801.photobucket.com/albums/y...psleqobww9.jpg Got a set of Mayhem Trail shooters in post as well :) |
Re: CC's Nothing special Wraith :) are you going to the g6 comp meet today. |
Re: CC's Nothing special Wraith :) Where's abouts is it? |
Re: CC's Nothing special Wraith :) |
Re: CC's Nothing special Wraith :) |
Mean machine! Mine has a ways to go to be this nice. Sent from my LG-E980 using Tapatalk |
All times are GMT -6. The time now is 10:41 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com