|
![]() |
| LinkBack | Thread Tools | Display Modes |
![]() | #1 |
Rock Crawler Join Date: Mar 2012 Location: UK
Posts: 509
| ![]()
Thought I would stick up a few pics of my Wraith which I put together over the new year, unlucky for me I spent a week in hospital just after Xmas with a burst appendix, but by the time I got out of hospital 90% of the parts had turned up so I could crack on with the build Picture time ![]() MIPS ![]() RRP gearing ![]() GPM Alloy parts, I know the chubs are on wrong and have been sorted lol ![]() Gmade Piggys ![]() All metal tranny with 32dp gearing ![]() ![]() More build pics ![]() ![]() All together with Topcad beadlocks ![]() Last edited by Curb Crawler; 04-11-2014 at 05:01 AM. |
![]() | ![]() |
Sponsored Links | |
![]() | #2 |
Rock Crawler Join Date: Mar 2012 Location: UK
Posts: 509
| ![]()
Open bonnet mod ![]() Paint! ![]() Testing my LED install ![]() ![]() Body panels fitted ![]() |
![]() | ![]() |
![]() | #3 |
Rock Crawler Join Date: Mar 2012 Location: UK
Posts: 509
| ![]()
VP steering links ![]() Electrics ![]() Bodged under the hood, fingers crossed I have no heat issues ![]() Posion Spyder diff cover and VP steering links fitted ![]() ![]() Motor fitted and cage stripped to fit the interior ![]() ![]() ![]() Radshape alloy sill plates ![]() And finished for now ![]() ![]() |
![]() | ![]() |
![]() | #4 |
Quarry Creeper Join Date: Dec 2012 Location: Seattle
Posts: 275
| ![]()
I like those plates. Rig looks good!
|
![]() | ![]() |
![]() | #5 |
Newbie Join Date: Dec 2013 Location: Wales
Posts: 46
| ![]()
oooh, deja vu ;) Still nice!
|
![]() | ![]() |
![]() | #6 |
Rock Crawler Join Date: Nov 2013 Location: In the country
Posts: 522
| ![]()
Nice! Like the plates too Sent from my LG-E980 using Tapatalk |
![]() | ![]() |
![]() | #7 |
Quarry Creeper Join Date: Jun 2013 Location: South jersey
Posts: 265
| ![]()
I like those side plates...just might have to get a set myself!
|
![]() | ![]() |
![]() | #8 |
Quarry Creeper Join Date: Nov 2012 Location: Springfield, MO
Posts: 324
| ![]()
I like the way you did the light bar mount, haven't seen it done that way yet.
|
![]() | ![]() |
![]() | #9 |
Rock Crawler Join Date: Mar 2012 Location: UK
Posts: 509
| ![]() Cheers, I didn't like the way others used the tiny little screws that fix the roof panel on to hold the brackets, the light bar kit came with aload of different brackets, so I just tried a few different ones until I was happy
|
![]() | ![]() |
![]() | #10 |
Rock Crawler Join Date: Mar 2012 Location: UK
Posts: 509
| ![]() |
![]() | ![]() |
![]() | #11 |
Rock Crawler Join Date: Mar 2012 Location: UK
Posts: 509
| ![]() |
![]() | ![]() |
![]() | #12 |
Rock Crawler Join Date: Mar 2012 Location: UK
Posts: 509
| ![]()
And a few vids from earlier AJ's Axial Wraith - YouTube AJ's Axial Wraith 2 - YouTube AJ's Wraith 3 - YouTube |
![]() | ![]() |
![]() | #13 |
Pebble Pounder ![]() Join Date: Jan 2011 Location: london,England
Posts: 170
| ![]()
Very nice build mate.
|
![]() | ![]() |
![]() | #14 |
Pebble Pounder Join Date: Dec 2010 Location: Roanoke, VA
Posts: 149
| ![]()
Is your ESC mounted on the electronics box? How is the clearance? I thought about this but it didn't look like it would clear.
|
![]() | ![]() |
![]() | #15 |
Rock Crawler Join Date: Mar 2012 Location: UK
Posts: 509
| ![]()
Yea the esc is mounted on top rx box, it's a very close fit to the hood, maybe only a few mm
Last edited by Curb Crawler; 01-23-2014 at 03:18 PM. Reason: Missed out a word d'oh |
![]() | ![]() |
![]() | #16 |
Pebble Pounder Join Date: Dec 2010 Location: Roanoke, VA
Posts: 149
| ![]()
Ok nice. And you didn't lower the box? I have the stock AE2 ESC but I will be picking up the BRXL shortly. Going to have to try that. Any heat issues so far?
|
![]() | ![]() |
![]() | #17 |
Rock Crawler Join Date: Mar 2012 Location: UK
Posts: 509
| ![]()
Straight on top with no mods, I haven't had any heat issues yet, but then I never really run flat out for any real length of time, also it's the middle of winter here so it's pretty cold, summertime running might be a different story though
|
![]() | ![]() |
![]() | #18 |
Pebble Pounder Join Date: Dec 2013 Location: Derby Line
Posts: 151
| ![]()
First time I see Top cad wheel actually mounted on a rig, they look good! HOw's the quality? Do they clamp the tires correctly? are they offset a lot? Nice built! |
![]() | ![]() |
![]() | #19 |
Rock Crawler Join Date: Mar 2012 Location: UK
Posts: 509
| ![]()
I did have a rubbing issue running the VP steering links, but I run +3mm hexs on the front and they fit fine now, with the stock style steering links they bolt straight on though. The quality is spot on for the money and they grip the tyres aswell as any other beadlocks I've had before, I would give them a good 8/10 if I was to review them ![]() Last edited by Curb Crawler; 01-24-2014 at 01:40 AM. |
![]() | ![]() |
![]() | #20 |
Rock Crawler Join Date: Mar 2012 Location: UK
Posts: 509
| ![]()
I wasnt too impressed with the crappy 17kg that was fitted, so I've robbed the monster Savox SA1283SG 30kg servo out of my Tekno Losi 8ight T ![]() ![]() ![]() Last edited by Curb Crawler; 01-26-2014 at 09:44 AM. |
![]() | ![]() |
![]() |
![]() | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
**SPECIAL** C.I. Wraith Front Electronic Tray - $10 Shipped Worldwide **SPECIAL** | Nova's Ark | Vendors Electronics | 12 | 09-07-2012 02:29 PM |
My kids CC's | nhcrawl | Duratrax Cliff Climber | 3 | 11-20-2010 11:54 PM |
cc's 9000kv brushless motor | NeXt559 | Non Crawler RC's | 22 | 11-27-2008 11:14 AM |
Thread Tools | |
Display Modes | |
| |