230oz servo, 900kv airplane outrunner and rock beast rubber
 

Just installed mermory foams and holy hell thes tires are now on fire. also opend up the big paddles on the shoulder

first 25 seconds is full speed then the next 2 minutes is the same runs in slow motion

<iframe width="560" height="315" src="//www.youtube.com/embed/cTnFtpRVOe4" frameborder="0" allowfullscreen></iframe>

Same run full speed
<iframe width="560" height="315" src="//www.youtube.com/embed/j3ZAFOw5AlU" frameborder="0" allowfullscreen></iframe>

vid is also currently processing. watch in 720 if you can. I promise my next slow motion vids will be in good light

sorry I thought the video would play while processing but it looks like only I can watch it when logged into youtube

Pretty sure Gay Dave that I wanna be is ffffiiiing up my video. Sorry if I'd of known I would have waited till it was done processing

Re: 230oz servo, 900kv airplane outrunner and rock beast rubber
 

Pits picture while we wait
http://i661.photobucket.com/albums/u...ps6e73ed6f.jpg

Re: 230oz servo, 900kv airplane outrunner and rock beast rubber
 

Video is unavailable? What are you trying to show us here?

Re: 230oz servo, 900kv airplane outrunner and rock beast rubber
 

Its processing.

Not realy trying to show anything. Just a bone cheap brush less system and modded tires with old school memory foams. Sorry the bid isn't working. Should work in the morning


Maybe this link will work
http://youtu.be/ZrKTH33OAh4

Re: 230oz servo, 900kv airplane outrunner and rock beast rubber
 

Thing is definitely sturdy!

Re: 230oz servo, 900kv airplane outrunner and rock beast rubber
 

For some reason its still processing. Also see it has a few views Gona try and re upload it.

Re: 230oz servo, 900kv airplane outrunner and rock beast rubber
 

Working on fixing the embedded link. Problem was I couldn't combine a slow motion video with a normal bid.

First embedded link is working

Re: 230oz servo, 900kv airplane outrunner and rock beast rubber
 

Tsl's on the same line. They do better then expected belly is dragging coming into the line but the launch just as good as the Pitts coming into the vertical rocks. I've cut the tsl center all in half and left the outer paddles alone.

<iframe width="560" height="315" src="//www.youtube.com/embed/aOaVzEQujkQ" frameborder="0" allowfullscreen></iframe>

This 900 kV motor has plenty of power and wheel speed for some ledge hopping. Motor also runs 4s but 2200s 4s batts are getting thick and dangerously close to the rocks

Full speed
<iframe width="560" height="315" src="//www.youtube.com/embed/1bG_Iq0iSOk" frameborder="0" allowfullscreen></iframe>
Pits fronts have 4oz the tsl aren't weighted

Re: 230oz servo, 900kv airplane outrunner and rock beast rubber
 

heres a better vid in some daylight. can see the outrunner spinning

<iframe width="560" height="315" src="//www.youtube.com/embed/KZGh10OONrs" frameborder="0" allowfullscreen></iframe>

I love this rig. below the right rear tire was a a long drop off. I needed to tackle this climb on the throttle with the first attempt instead of a iffy almost cartwheel off the rocks